[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 00/18] hw/block/nvme: bump to v1.3
From: |
Klaus Jensen |
Subject: |
[PATCH v3 00/18] hw/block/nvme: bump to v1.3 |
Date: |
Mon, 6 Jul 2020 08:12:45 +0200 |
From: Klaus Jensen <k.jensen@samsung.com>
This adds mandatory features of NVM Express v1.3 to the emulated NVMe
device.
v3:
* hw/block/nvme: additional tracing
- Reverse logic in nvme_cid(). (Philippe)
- Move nvme_cid() and nvme_sqid() to source file. (Philippe)
* hw/block/nvme: fix missing endian conversion
- Move this patch to very early in the series and fix the bug properly as
suggested by Philippe. Then let the change trickle down through
the series. (Philippe)
* hw/block/nvme: add remaining mandatory controller parameters
- Move the nvme_feature_{support,default} arrays to the source file.
(Philippe)
- Add a NVME_FID_MAX constant. (Philippe)
* hw/block/nvme: support the get/set features select and save fields
- Move the nvme_feature_cap array to the source file. (Philippe)
* hw/block/nvme: reject invalid nsid values in active namespace id list
- Rework the condition and add a comment and reference to the spec.
(Philippe)
* hw/block/nvme: provide the mandatory subnqn field
- Change to use strpadcpy(). (Philippe)
Had to clear some R-b's due to functional changes.
Missing review: 2, 3, 7, 12, 16, 17
v2:
* hw/block/nvme: bump spec data structures to v1.3
- Shorten some constants. (Dmitry)
* hw/block/nvme: add temperature threshold feature
- Remove unused temp_thresh member. (Dmitry)
* hw/block/nvme: add support for the get log page command
- Change the temperature field in the NvmeSmartLog struct to be an
uint16_t and handle wierd alignment by adding QEMU_PACKED to the
struct. (Dmitry)
* hw/block/nvme: add remaining mandatory controller parameters
- Fix spelling. (Dmitry)
* hw/block/nvme: support the get/set features select and save fields
- Fix bad logic causing temperature thresholds to always report
defaults. (Dmitry)
* hw/block/nvme: reject invalid nsid values in active namespace id list
- Added patch; reject the 0xfffffffe and 0xffffffff nsid values.
$ git-backport-diff -u for-master/bump-to-v1.3-v2 -r upstream/master... -S
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively
001/18:[----] [--] 'hw/block/nvme: bump spec data structures to v1.3'
002/18:[0008] [FC] 'hw/block/nvme: fix missing endian conversion'
003/18:[0028] [FC] 'hw/block/nvme: additional tracing'
004/18:[----] [--] 'hw/block/nvme: add support for the abort command'
005/18:[0004] [FC] 'hw/block/nvme: add temperature threshold feature'
006/18:[----] [--] 'hw/block/nvme: mark fw slot 1 as read-only'
007/18:[----] [--] 'hw/block/nvme: add support for the get log page command'
008/18:[0002] [FC] 'hw/block/nvme: add support for the asynchronous event
request command'
009/18:[----] [--] 'hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h'
010/18:[----] [--] 'hw/block/nvme: flush write cache when disabled'
011/18:[0044] [FC] 'hw/block/nvme: add remaining mandatory controller
parameters'
012/18:[0024] [FC] 'hw/block/nvme: support the get/set features select and save
fields'
013/18:[----] [--] 'hw/block/nvme: make sure ncqr and nsqr is valid'
014/18:[----] [--] 'hw/block/nvme: support identify namespace descriptor list'
015/18:[0008] [FC] 'hw/block/nvme: reject invalid nsid values in active
namespace id list'
016/18:[----] [--] 'hw/block/nvme: enforce valid queue creation sequence'
017/18:[0006] [FC] 'hw/block/nvme: provide the mandatory subnqn field'
018/18:[----] [--] 'hw/block/nvme: bump supported version to v1.3'
Klaus Jensen (18):
hw/block/nvme: bump spec data structures to v1.3
hw/block/nvme: fix missing endian conversion
hw/block/nvme: additional tracing
hw/block/nvme: add support for the abort command
hw/block/nvme: add temperature threshold feature
hw/block/nvme: mark fw slot 1 as read-only
hw/block/nvme: add support for the get log page command
hw/block/nvme: add support for the asynchronous event request command
hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h
hw/block/nvme: flush write cache when disabled
hw/block/nvme: add remaining mandatory controller parameters
hw/block/nvme: support the get/set features select and save fields
hw/block/nvme: make sure ncqr and nsqr is valid
hw/block/nvme: support identify namespace descriptor list
hw/block/nvme: reject invalid nsid values in active namespace id list
hw/block/nvme: enforce valid queue creation sequence
hw/block/nvme: provide the mandatory subnqn field
hw/block/nvme: bump supported version to v1.3
block/nvme.c | 18 +-
hw/block/nvme.c | 676 ++++++++++++++++++++++++++++++++++++++++--
hw/block/nvme.h | 22 +-
hw/block/trace-events | 27 +-
include/block/nvme.h | 225 +++++++++++---
5 files changed, 892 insertions(+), 76 deletions(-)
--
2.27.0
- [PATCH v3 00/18] hw/block/nvme: bump to v1.3,
Klaus Jensen <=