qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 00/20] backup performance: block_status + async


From: Vladimir Sementsov-Ogievskiy
Subject: [PATCH v2 00/20] backup performance: block_status + async
Date: Mon, 1 Jun 2020 21:10:58 +0300

Hi all!

This a last part of original
"[RFC 00/24] backup performance: block_status + async", prepartions are
already merged.

The series turn backup into series of block_copy_async calls, covering
the whole disk, so we get block-status based paralallel async requests
out of the box, which gives performance gain:

-----------------  ----------------  -------------  --------------------------  
--------------------------  ----------------  -------------------------------
                   mirror(upstream)  backup(new)    backup(new, no-copy-range)  
backup(new, copy-range-1w)  backup(upstream)  backup(upstream, no-copy-range)
hdd-ext4:hdd-ext4  18.86 +- 0.11     45.50 +- 2.35  19.22 +- 0.09               
19.51 +- 0.09               22.85 +- 5.98     19.72 +- 0.35
hdd-ext4:ssd-ext4  8.99 +- 0.02      9.30 +- 0.01   8.97 +- 0.02                
9.02 +- 0.02                9.68 +- 0.26      9.84 +- 0.12
ssd-ext4:hdd-ext4  9.09 +- 0.11      9.34 +- 0.10   9.34 +- 0.10                
8.99 +- 0.01                11.37 +- 0.37     11.47 +- 0.30
ssd-ext4:ssd-ext4  4.07 +- 0.02      5.41 +- 0.05   4.05 +- 0.01                
8.35 +- 0.58                9.83 +- 0.64      8.62 +- 0.35
hdd-xfs:hdd-xfs    18.90 +- 0.19     43.26 +- 2.47  19.62 +- 0.14               
19.38 +- 0.16               19.55 +- 0.26     19.62 +- 0.12
hdd-xfs:ssd-xfs    8.93 +- 0.12      9.35 +- 0.03   8.93 +- 0.08                
8.93 +- 0.05                9.79 +- 0.30      9.55 +- 0.15
ssd-xfs:hdd-xfs    9.15 +- 0.07      9.74 +- 0.28   9.29 +- 0.03                
9.08 +- 0.05                10.85 +- 0.31     10.91 +- 0.30
ssd-xfs:ssd-xfs    4.06 +- 0.01      4.93 +- 0.02   4.04 +- 0.01                
8.17 +- 0.42                9.52 +- 0.49      8.85 +- 0.46
ssd-ext4:nbd       9.96 +- 0.11      11.45 +- 0.15  11.45 +- 0.02               
17.22 +- 0.06               34.45 +- 1.35     35.16 +- 0.37
nbd:ssd-ext4       9.84 +- 0.02      9.84 +- 0.04   9.80 +- 0.06                
18.96 +- 0.06               30.89 +- 0.73     31.46 +- 0.21
-----------------  ----------------  -------------  --------------------------  
--------------------------  ----------------  -------------------------------


The table shows, that copy_range is in bad relation with parallel async
requests. copy_range brings real performance gain only on supporting fs,
like btrfs. But even on such fs, I'm not sure that this is a good
default behavior: if we do offload copy, so, that no real copy but just
link block in backup the same blocks as in original, this means that
further write from guest will lead to fragmentation of guest disk, when
the aim of backup is to operate transparently for the guest.

So, in addition to these series I also suggest to disable copy_range by
default.

===

How to test:

prepare images:
In a directories, where you want to place source and target images,
prepare images by:

for img in test-source test-target; do
 ./qemu-img create -f raw $img 1000M;
 ./qemu-img bench -c 1000 -d 1 -f raw -s 1M -w --pattern=0xff $img
done

prepare similar image for nbd server, and start it somewhere by

 qemu-nbd --persistent --nocache -f raw IMAGE

Then, run benchmark, like this:
./bench-backup.py --qemu new:../../x86_64-softmmu/qemu-system-x86_64 
upstream:/work/src/qemu/up-backup-block-copy-master/x86_64-softmmu/qemu-system-x86_64
 --dir hdd-ext4:/test-a hdd-xfs:/test-b ssd-ext4:/ssd ssd-xfs:/ssd-b --test 
$(for fs in ext4 xfs; do echo hdd-$fs:hdd-$fs hdd-$fs:ssd-$fs ssd-$fs:hdd-$fs 
ssd-$fs:ssd-$fs; done) --nbd 192.168.100.2 --test ssd-ext4:nbd nbd:ssd-ext4

(you may simply reduce number of directories/test-cases, use --help for
 help)

===

Note, that I included here
"[PATCH] block/block-copy: block_copy_dirty_clusters: fix failure check"
which was previously sent in separate, but still untouched in mailing
list. It still may be applied separately.

Vladimir Sementsov-Ogievskiy (20):
  block/block-copy: block_copy_dirty_clusters: fix failure check
  iotests: 129 don't check backup "busy"
  qapi: backup: add x-use-copy-range parameter
  block/block-copy: More explicit call_state
  block/block-copy: implement block_copy_async
  block/block-copy: add max_chunk and max_workers parameters
  block/block-copy: add ratelimit to block-copy
  block/block-copy: add block_copy_cancel
  blockjob: add set_speed to BlockJobDriver
  job: call job_enter from job_user_pause
  qapi: backup: add x-max-chunk and x-max-workers parameters
  iotests: 56: prepare for backup over block-copy
  iotests: 129: prepare for backup over block-copy
  iotests: 185: prepare for backup over block-copy
  iotests: 219: prepare for backup over block-copy
  iotests: 257: prepare for backup over block-copy
  backup: move to block-copy
  block/block-copy: drop unused argument of block_copy()
  simplebench: bench_block_job: add cmd_options argument
  simplebench: add bench-backup.py

 qapi/block-core.json                   |  11 +-
 block/backup-top.h                     |   1 +
 include/block/block-copy.h             |  45 +++-
 include/block/block_int.h              |   8 +
 include/block/blockjob_int.h           |   2 +
 block/backup-top.c                     |   6 +-
 block/backup.c                         | 170 ++++++++------
 block/block-copy.c                     | 183 ++++++++++++---
 block/replication.c                    |   1 +
 blockdev.c                             |  10 +
 blockjob.c                             |   6 +
 job.c                                  |   1 +
 scripts/simplebench/bench-backup.py    | 132 +++++++++++
 scripts/simplebench/bench-example.py   |   2 +-
 scripts/simplebench/bench_block_job.py |  13 +-
 tests/qemu-iotests/056                 |   8 +-
 tests/qemu-iotests/129                 |   3 +-
 tests/qemu-iotests/185                 |   3 +-
 tests/qemu-iotests/185.out             |   2 +-
 tests/qemu-iotests/219                 |  13 +-
 tests/qemu-iotests/257                 |   1 +
 tests/qemu-iotests/257.out             | 306 ++++++++++++-------------
 22 files changed, 640 insertions(+), 287 deletions(-)
 create mode 100755 scripts/simplebench/bench-backup.py

-- 
2.21.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]