[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 3/3] block: make BlockConf.*_size properties 32-bit
From: |
Roman Kagan |
Subject: |
Re: [PATCH v4 3/3] block: make BlockConf.*_size properties 32-bit |
Date: |
Thu, 21 May 2020 00:45:59 +0300 |
On Wed, May 20, 2020 at 11:04:44AM +0200, Philippe Mathieu-Daudé wrote:
> On 5/20/20 10:06 AM, Roman Kagan wrote:
> > Devices (virtio-blk, scsi, etc.) and the block layer are happy to use
> > 32-bit for logical_block_size, physical_block_size, and min_io_size.
> > However, the properties in BlockConf are defined as uint16_t limiting
> > the values to 32768.
> >
> > This appears unnecessary tight, and we've seen bigger block sizes handy
> > at times.
> >
> > Make them 32 bit instead and lift the limitation up to 2 MiB which
> > appears to be good enough for everybody, and matches the qcow2 cluster
> > size limit.
> >
> > As the values can now be fairly big and awkward to type, make the
> > property setter accept common size suffixes (k, m).
> >
> > Also as the devices which use min_io_size (virtio-blk and scsi) pass its
> > value to the guest in units of logical blocks in a 16bit field, to
> > prevent its silent truncation add a corresponding check to
> > blkconf_blocksizes.
> >
> > Signed-off-by: Roman Kagan <address@hidden>
> > ---
> > v3 -> v4:
> > - check min_io_size against truncation [Kevin]
> >
> > v2 -> v3:
> > - mention qcow2 cluster size limit in the log and comment [Eric]
> >
> > v1 -> v2:
> > - cap the property at 2 MiB [Eric]
> > - accept size suffixes
> >
> > include/hw/block/block.h | 8 ++++----
> > include/hw/qdev-properties.h | 2 +-
> > hw/block/block.c | 11 +++++++++++
> > hw/core/qdev-properties.c | 34 ++++++++++++++++++++++++----------
> > 4 files changed, 40 insertions(+), 15 deletions(-)
> >
> > diff --git a/include/hw/block/block.h b/include/hw/block/block.h
> > index 784953a237..2fa09aa0b1 100644
> > --- a/include/hw/block/block.h
> > +++ b/include/hw/block/block.h
> > @@ -18,9 +18,9 @@
> > typedef struct BlockConf {
> > BlockBackend *blk;
> > - uint16_t physical_block_size;
> > - uint16_t logical_block_size;
> > - uint16_t min_io_size;
> > + uint32_t physical_block_size;
> > + uint32_t logical_block_size;
> > + uint32_t min_io_size;
> > uint32_t opt_io_size;
> > int32_t bootindex;
> > uint32_t discard_granularity;
> > @@ -51,7 +51,7 @@ static inline unsigned int
> > get_physical_block_exp(BlockConf *conf)
> > _conf.logical_block_size), \
> > DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \
> > _conf.physical_block_size), \
> > - DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \
> > + DEFINE_PROP_UINT32("min_io_size", _state, _conf.min_io_size, 0), \
> > DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \
> > DEFINE_PROP_UINT32("discard_granularity", _state, \
> > _conf.discard_granularity, -1), \
> > diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
> > index f161604fb6..f9e0f8c041 100644
> > --- a/include/hw/qdev-properties.h
> > +++ b/include/hw/qdev-properties.h
> > @@ -197,7 +197,7 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
> > #define DEFINE_PROP_BIOS_CHS_TRANS(_n, _s, _f, _d) \
> > DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_bios_chs_trans, int)
> > #define DEFINE_PROP_BLOCKSIZE(_n, _s, _f) \
> > - DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint16_t)
> > + DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint32_t)
> > #define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
> > DEFINE_PROP(_n, _s, _f, qdev_prop_pci_host_devaddr,
> > PCIHostDeviceAddress)
> > #define DEFINE_PROP_OFF_AUTO_PCIBAR(_n, _s, _f, _d) \
> > diff --git a/hw/block/block.c b/hw/block/block.c
> > index 5f8ebff59c..cd95e7e38f 100644
> > --- a/hw/block/block.c
> > +++ b/hw/block/block.c
> > @@ -96,6 +96,17 @@ bool blkconf_blocksizes(BlockConf *conf, Error **errp)
> > return false;
> > }
> > + /*
> > + * all devices which support min_io_size (scsi and virtio-blk) expose
> > it to
> > + * the guest as a uint16_t in units of logical blocks
> > + */
> > + if ((conf->min_io_size / conf->logical_block_size) > UINT16_MAX) {
> > + error_setg(errp,
> > + "min_io_size must be no more than "
> > stringify(UINT16_MAX)
> > + " of logical_block_size");
> > + return false;
> > + }
> > +
> > if (conf->opt_io_size % conf->logical_block_size) {
> > error_setg(errp,
> > "opt_io_size must be a multple of logical_block_size");
> > diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
> > index cc924815da..fd03cc7597 100644
> > --- a/hw/core/qdev-properties.c
> > +++ b/hw/core/qdev-properties.c
> > @@ -14,6 +14,7 @@
> > #include "qapi/visitor.h"
> > #include "chardev/char.h"
> > #include "qemu/uuid.h"
> > +#include "qemu/units.h"
> > void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
> > Error **errp)
> > @@ -729,30 +730,42 @@ const PropertyInfo qdev_prop_pci_devfn = {
> > /* --- blocksize --- */
> > +/* lower limit is sector size */
> > +#define MIN_BLOCK_SIZE 512
> > +#define MIN_BLOCK_SIZE_STR "512 B"
> > +/*
> > + * upper limit is arbitrary, 2 MiB looks sufficient for all sensible uses,
> > and
> > + * matches qcow2 cluster size limit
> > + */
> > +#define MAX_BLOCK_SIZE (2 * MiB)
>
> Can you split this patch?
>
> - add/use definitions (here MAX_BLOCK_SIZE = 32 * KiB)
> - use 32-bit
> - raise limit to 2MB
I can see the value of splitting out the rework of the blocksize
property, but I'm struggling to justify expanding the fields without
increasing the limits. Do you mind if I do it in two patches rather
than three?
Thanks,
Roman.
>
> Feel free to refuse, but having atomic changes is better for bisectability
> and cherry-picking/reverting.
>
> Thanks,
>
> Phil.
>
> > +#define MAX_BLOCK_SIZE_STR "2 MiB"
> > +
> > static void set_blocksize(Object *obj, Visitor *v, const char *name,
> > void *opaque, Error **errp)
> > {
> > DeviceState *dev = DEVICE(obj);
> > Property *prop = opaque;
> > - uint16_t value, *ptr = qdev_get_prop_ptr(dev, prop);
> > + uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
> > + uint64_t value;
> > Error *local_err = NULL;
> > - const int64_t min = 512;
> > - const int64_t max = 32768;
> > if (dev->realized) {
> > qdev_prop_set_after_realize(dev, name, errp);
> > return;
> > }
> > - visit_type_uint16(v, name, &value, &local_err);
> > + visit_type_size(v, name, &value, &local_err);
> > if (local_err) {
> > error_propagate(errp, local_err);
> > return;
> > }
> > /* value of 0 means "unset" */
> > - if (value && (value < min || value > max)) {
> > - error_setg(errp, QERR_PROPERTY_VALUE_OUT_OF_RANGE,
> > - dev->id ? : "", name, (int64_t)value, min, max);
> > + if (value && (value < MIN_BLOCK_SIZE || value > MAX_BLOCK_SIZE)) {
> > + error_setg(errp,
> > + "Property %s.%s doesn't take value %" PRIu64
> > + " (minimum: " MIN_BLOCK_SIZE_STR
> > + ", maximum: " MAX_BLOCK_SIZE_STR ")",
> > + dev->id ? : "", name, value);
> > return;
> > }
> > @@ -768,9 +781,10 @@ static void set_blocksize(Object *obj, Visitor *v,
> > const char *name,
> > }
> > const PropertyInfo qdev_prop_blocksize = {
> > - .name = "uint16",
> > - .description = "A power of two between 512 and 32768",
> > - .get = get_uint16,
> > + .name = "size",
> > + .description = "A power of two between " MIN_BLOCK_SIZE_STR
> > + " and " MAX_BLOCK_SIZE_STR,
> > + .get = get_uint32,
> > .set = set_blocksize,
> > .set_default_value = set_default_value_uint,
> > };
> >
>
- Re: [PATCH v4 2/3] block: consolidate blocksize properties consistency checks, (continued)