[PULL 09/20] via-ide: initialise IDE controller in legacy mode

[John Snow]

From: Mark Cave-Ayland <address@hidden>

According to both the VT82C686B and VT8231 datasheets the VIA Southbridge IDE
controller is initialised in legacy mode.

This allows Linux to correctly determine that legacy rather than PCI IRQ routing
should be used since the boot console text in the fulong2e test image changes 
from:

scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/100 cmd 0xffffffffbfd04050 ctl 0xffffffffbfd04062 \
  bmdma 0xffffffffbfd04040 irq 14
ata2: PATA max UDMA/100 cmd 0xffffffffbfd04058 ctl 0xffffffffbfd04066 \
  bmdma 0xffffffffbfd04048 irq 14

to:

scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/100 cmd 0xffffffffbfd001f0 ctl 0xffffffffbfd003f6 \
  bmdma 0xffffffffbfd04040 irq 14
ata2: PATA max UDMA/100 cmd 0xffffffffbfd00170 ctl 0xffffffffbfd00376 \
  bmdma 0xffffffffbfd04048 irq 15

Signed-off-by: Mark Cave-Ayland <address@hidden>
Tested-by: BALATON Zoltan <address@hidden>
Signed-off-by: BALATON Zoltan <address@hidden>
Message-id: address@hidden
Signed-off-by: John Snow <address@hidden>
---
 hw/ide/via.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/ide/via.c b/hw/ide/via.c
index 8363bd4802..c8835de01b 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -167,7 +167,7 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
     uint8_t *pci_conf = dev->config;
     int i;
 
-    pci_config_set_prog_interface(pci_conf, 0x8f); /* native PCI ATA mode */
+    pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy mode */
     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
     dev->wmask[PCI_INTERRUPT_LINE] = 0;
 
-- 
2.21.1