Hi,
Ok, given that seabios has no setup any manual configuration needs to be done via qemu.
But why do we need a new interface for that? IDE can pass the geometry
to the guest. virtio-blk has support too (VIRTIO_BLK_F_GEOMETRY).
Likewise scsi (MODE_PAGE_HD_GEOMETRY). So this should be doable without
any qemu changes.
This was indeed considered (all 3 methods) but it has the following issues:
Physical geometries of devices must now also be logical geometries with translation=none.
Yes.
When the OS will query these devices - It will now see different physical geometries, adapted to be logical geometries.
Yes.
I’m not sure even how to implement this without breaking existing
compatibility - since we don’t want to affect logical geometries of
currently used guests.
We can copy the logic which calculates lchs from seabios to qemu and use
it for pchs.
The tricky part of this is how to do the switch without requiring a
lockstep update of seabios and qemu. seabios can't easily know whenever
it should use the current logic (current qemu) or whenever it should
simply use pchs with translation=none (updated qemu).
Hmm ...
MODE_PAGE_HD_GEOMETRY does not contain the spts, only cylinders (as 3
byte number) and heads (as 1 byte number) and computes the spts using:
Well, there also is MODE_PAGE_FLEXIBLE_DISK_GEOMETRY.
Moving a scsi-hd/virtio-blk with 255 physical heads to ide-hd, we will
still need to report 255 heads - this is possible since a whole byte
can be used in the “ide identify” command, but goes against the spec
of a maximum of 16 heads for IDE.
Why do you want migrate _to_ IDE?
Even without migration, now under SeaBIOS probably most IDE disks
report 255 heads and 63 spts due to LBA translation, while exposing
up to 16 physical heads (IDE spec).
So you can’t really report in ATA identify command your wanted logical
heads (255).
This can be solved in a very complicated way:
For virtio-blk disks - report bios geometries as physical geometries.
- This might break current compatibility (showing different physical geometries)
For scsi disks - report bios geometries as physical geometries.
- Implement MODE_PAGE_FLEXIBLE_DISK_GEOMETRY and translation=none - this new interface will help with compatibility
For IDE disks - specially craft valid physical geometries (heads <= 16) with a specific translation,
- This is super complicated, for example to make an IDE disk report lchs of 32 heads, 56 spts, you need a physical geometry of 16 heads, 56 spts and report 2046 cylinders with a "large" translation - which will effectively cut down the number of cylinders by 2 to 1023 and multiply the heads by 2 to 32, achieving the desired lchs. Also we can not even make an IDE report 255 heads with 56 spts with any translation (this is an actual value from production) - so the disk must be moved to scsi-hd/virtio-blk - which also breaks compatibility.
This implementation creates 3 different non conventional (PV) ways of reporting lchs directly between Qemu and SeaBIOS - which add a lot of technical depth for resolving a legacy issue. A fw-cfg value named “bootdevices” (or “bios-geometry”) is much more straightforward and makes it more readable/explicit.
WDYT?
Overall this approach is much more complicated.
Well, adding new fw_cfg interfaces has a long term maintenance cost.
So there should be a pretty good reason for them.
cheers,
Gerd