[Qemu-block] [PATCH v3 02/15] monitor: Split monitor_init in HMP and QMP function

[Kevin Wolf]

Instead of mixing HMP and QMP monitors in the same function, separate
the monitor creation function for both.

While in theory, one could pass both MONITOR_USE_CONTROL and
MONITOR_USE_READLINE before this patch and both flags would do
something, readline support is tightly coupled with HMP: QMP never feeds
its input to readline, and the tab completion function treats the input
as an HMP command. Therefore, this configuration is useless.

After this patch, the QMP path asserts that MONITOR_USE_READLINE is not
set. The HMP path can be used with or without MONITOR_USE_READLINE, like
before.

Signed-off-by: Kevin Wolf <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
Reviewed-by: Markus Armbruster <address@hidden>
---
 monitor.c | 89 ++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 52 insertions(+), 37 deletions(-)

diff --git a/monitor.c b/monitor.c
index 9846a5623b..a70c1283b1 100644
--- a/monitor.c
+++ b/monitor.c
@@ -704,7 +704,7 @@ static void handle_hmp_command(Monitor *mon, const char 
*cmdline);
 
 static void monitor_iothread_init(void);
 
-static void monitor_data_init(Monitor *mon, bool skip_flush,
+static void monitor_data_init(Monitor *mon, int flags, bool skip_flush,
                               bool use_io_thread)
 {
     if (use_io_thread && !mon_iothread) {
@@ -719,6 +719,7 @@ static void monitor_data_init(Monitor *mon, bool skip_flush,
     mon->skip_flush = skip_flush;
     mon->use_io_thread = use_io_thread;
     mon->qmp.qmp_requests = g_queue_new();
+    mon->flags = flags;
 }
 
 static void monitor_data_destroy(Monitor *mon)
@@ -742,7 +743,7 @@ char *qmp_human_monitor_command(const char *command_line, 
bool has_cpu_index,
     char *output = NULL;
     Monitor *old_mon, hmp;
 
-    monitor_data_init(&hmp, true, false);
+    monitor_data_init(&hmp, 0, true, false);
 
     old_mon = cur_mon;
     cur_mon = &hmp;
@@ -4605,19 +4606,51 @@ static void monitor_qmp_setup_handlers_bh(void *opaque)
     monitor_list_append(mon);
 }
 
-void monitor_init(Chardev *chr, int flags)
+static void monitor_init_qmp(Chardev *chr, int flags)
 {
     Monitor *mon = g_malloc(sizeof(*mon));
-    bool use_readline = flags & MONITOR_USE_READLINE;
+
+    /* Only HMP supports readline */
+    assert(!(flags & MONITOR_USE_READLINE));
 
     /* Note: we run QMP monitor in I/O thread when @chr supports that */
-    monitor_data_init(mon, false,
-                      (flags & MONITOR_USE_CONTROL)
-                      && qemu_chr_has_feature(chr,
-                                              QEMU_CHAR_FEATURE_GCONTEXT));
+    monitor_data_init(mon, flags, false,
+                      qemu_chr_has_feature(chr, QEMU_CHAR_FEATURE_GCONTEXT));
 
     qemu_chr_fe_init(&mon->chr, chr, &error_abort);
-    mon->flags = flags;
+    qemu_chr_fe_set_echo(&mon->chr, true);
+
+    json_message_parser_init(&mon->qmp.parser, handle_qmp_command, mon, NULL);
+    if (mon->use_io_thread) {
+        /*
+         * Make sure the old iowatch is gone.  It's possible when
+         * e.g. the chardev is in client mode, with wait=on.
+         */
+        remove_fd_in_watch(chr);
+        /*
+         * We can't call qemu_chr_fe_set_handlers() directly here
+         * since chardev might be running in the monitor I/O
+         * thread.  Schedule a bottom half.
+         */
+        aio_bh_schedule_oneshot(iothread_get_aio_context(mon_iothread),
+                                monitor_qmp_setup_handlers_bh, mon);
+        /* The bottom half will add @mon to @mon_list */
+    } else {
+        qemu_chr_fe_set_handlers(&mon->chr, monitor_can_read,
+                                 monitor_qmp_read, monitor_qmp_event,
+                                 NULL, mon, NULL, true);
+        monitor_list_append(mon);
+    }
+}
+
+static void monitor_init_hmp(Chardev *chr, int flags)
+{
+    Monitor *mon = g_malloc(sizeof(*mon));
+    bool use_readline = flags & MONITOR_USE_READLINE;
+
+    monitor_data_init(mon, flags, false, false);
+    qemu_chr_fe_init(&mon->chr, chr, &error_abort);
+
     if (use_readline) {
         mon->rs = readline_init(monitor_readline_printf,
                                 monitor_readline_flush,
@@ -4626,36 +4659,18 @@ void monitor_init(Chardev *chr, int flags)
         monitor_read_command(mon, 0);
     }
 
-    if (monitor_is_qmp(mon)) {
-        qemu_chr_fe_set_echo(&mon->chr, true);
-        json_message_parser_init(&mon->qmp.parser, handle_qmp_command,
-                                 mon, NULL);
-        if (mon->use_io_thread) {
-            /*
-             * Make sure the old iowatch is gone.  It's possible when
-             * e.g. the chardev is in client mode, with wait=on.
-             */
-            remove_fd_in_watch(chr);
-            /*
-             * We can't call qemu_chr_fe_set_handlers() directly here
-             * since chardev might be running in the monitor I/O
-             * thread.  Schedule a bottom half.
-             */
-            aio_bh_schedule_oneshot(iothread_get_aio_context(mon_iothread),
-                                    monitor_qmp_setup_handlers_bh, mon);
-            /* The bottom half will add @mon to @mon_list */
-            return;
-        } else {
-            qemu_chr_fe_set_handlers(&mon->chr, monitor_can_read,
-                                     monitor_qmp_read, monitor_qmp_event,
-                                     NULL, mon, NULL, true);
-        }
+    qemu_chr_fe_set_handlers(&mon->chr, monitor_can_read, monitor_read,
+                             monitor_event, NULL, mon, NULL, true);
+    monitor_list_append(mon);
+}
+
+void monitor_init(Chardev *chr, int flags)
+{
+    if (flags & MONITOR_USE_CONTROL) {
+        monitor_init_qmp(chr, flags);
     } else {
-        qemu_chr_fe_set_handlers(&mon->chr, monitor_can_read, monitor_read,
-                                 monitor_event, NULL, mon, NULL, true);
+        monitor_init_hmp(chr, flags);
     }
-
-    monitor_list_append(mon);
 }
 
 void monitor_cleanup(void)
-- 
2.20.1