[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PATCH v4 13/23] qemu-img: Simplify logic in img_compare()
From: |
Eric Blake |
Subject: |
[Qemu-block] [PATCH v4 13/23] qemu-img: Simplify logic in img_compare() |
Date: |
Wed, 13 Sep 2017 11:03:23 -0500 |
As long as we are querying the status for a chunk smaller than
the known image size, we are guaranteed that a successful return
will have set pnum to a non-zero size (pnum is zero only for
queries beyond the end of the file). Use that to slightly
simplify the calculation of the current chunk size being compared.
Likewise, we don't have to shrink the amount of data operated on
until we know we have to read the file, and therefore have to fit
in the bounds of our buffer. Also, note that 'total_sectors_over'
is equivalent to 'progress_base'.
With these changes in place, sectors_to_process() is now dead code,
and can be removed.
Signed-off-by: Eric Blake <address@hidden>
---
v3: new patch
---
qemu-img.c | 40 +++++++++++-----------------------------
1 file changed, 11 insertions(+), 29 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index b91133b922..f8423e9b3f 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1171,11 +1171,6 @@ static int64_t sectors_to_bytes(int64_t sectors)
return sectors << BDRV_SECTOR_BITS;
}
-static int64_t sectors_to_process(int64_t total, int64_t from)
-{
- return MIN(total - from, IO_BUF_SIZE >> BDRV_SECTOR_BITS);
-}
-
/*
* Check if passed sectors are empty (not allocated or contain only 0 bytes)
*
@@ -1372,13 +1367,9 @@ static int img_compare(int argc, char **argv)
goto out;
}
- for (;;) {
+ while (sector_num < total_sectors) {
int64_t status1, status2;
- nb_sectors = sectors_to_process(total_sectors, sector_num);
- if (nb_sectors <= 0) {
- break;
- }
status1 = bdrv_block_status_above(bs1, NULL,
sector_num * BDRV_SECTOR_SIZE,
(total_sectors1 - sector_num) *
@@ -1402,14 +1393,9 @@ static int img_compare(int argc, char **argv)
goto out;
}
allocated2 = status2 & BDRV_BLOCK_ALLOCATED;
- if (pnum1) {
- nb_sectors = MIN(nb_sectors,
- DIV_ROUND_UP(pnum1, BDRV_SECTOR_SIZE));
- }
- if (pnum2) {
- nb_sectors = MIN(nb_sectors,
- DIV_ROUND_UP(pnum2, BDRV_SECTOR_SIZE));
- }
+
+ assert(pnum1 && pnum2);
+ nb_sectors = DIV_ROUND_UP(MIN(pnum1, pnum2), BDRV_SECTOR_SIZE);
if (strict) {
if ((status1 & ~BDRV_BLOCK_OFFSET_MASK) !=
@@ -1422,9 +1408,10 @@ static int img_compare(int argc, char **argv)
}
}
if ((status1 & BDRV_BLOCK_ZERO) && (status2 & BDRV_BLOCK_ZERO)) {
- nb_sectors = DIV_ROUND_UP(MIN(pnum1, pnum2), BDRV_SECTOR_SIZE);
+ /* nothing to do */
} else if (allocated1 == allocated2) {
if (allocated1) {
+ nb_sectors = MIN(nb_sectors, IO_BUF_SIZE >> BDRV_SECTOR_BITS);
ret = blk_pread(blk1, sector_num << BDRV_SECTOR_BITS, buf1,
nb_sectors << BDRV_SECTOR_BITS);
if (ret < 0) {
@@ -1453,7 +1440,7 @@ static int img_compare(int argc, char **argv)
}
}
} else {
-
+ nb_sectors = MIN(nb_sectors, IO_BUF_SIZE >> BDRV_SECTOR_BITS);
if (allocated1) {
ret = check_empty_sectors(blk1, sector_num, nb_sectors,
filename1, buf1, quiet);
@@ -1476,30 +1463,24 @@ static int img_compare(int argc, char **argv)
if (total_sectors1 != total_sectors2) {
BlockBackend *blk_over;
- int64_t total_sectors_over;
const char *filename_over;
qprintf(quiet, "Warning: Image size mismatch!\n");
if (total_sectors1 > total_sectors2) {
- total_sectors_over = total_sectors1;
blk_over = blk1;
filename_over = filename1;
} else {
- total_sectors_over = total_sectors2;
blk_over = blk2;
filename_over = filename2;
}
- for (;;) {
+ while (sector_num < progress_base) {
int64_t count;
- nb_sectors = sectors_to_process(total_sectors_over, sector_num);
- if (nb_sectors <= 0) {
- break;
- }
ret = bdrv_is_allocated_above(blk_bs(blk_over), NULL,
sector_num * BDRV_SECTOR_SIZE,
- nb_sectors * BDRV_SECTOR_SIZE,
+ (progress_base - sector_num) *
+ BDRV_SECTOR_SIZE,
&count);
if (ret < 0) {
ret = 3;
@@ -1513,6 +1494,7 @@ static int img_compare(int argc, char **argv)
assert(QEMU_IS_ALIGNED(count, BDRV_SECTOR_SIZE));
nb_sectors = count >> BDRV_SECTOR_BITS;
if (ret) {
+ nb_sectors = MIN(nb_sectors, IO_BUF_SIZE >> BDRV_SECTOR_BITS);
ret = check_empty_sectors(blk_over, sector_num, nb_sectors,
filename_over, buf1, quiet);
if (ret) {
--
2.13.5
- Re: [Qemu-block] [Qemu-devel] [PATCH v4 07/23] block: Convert bdrv_get_block_status() to bytes, (continued)
- [Qemu-block] [PATCH v4 10/23] block: Switch bdrv_common_block_status_above() to byte-based, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 09/23] block: Switch BdrvCoGetBlockStatusData to byte-based, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 08/23] block: Switch bdrv_co_get_block_status() to byte-based, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 11/23] block: Switch bdrv_co_get_block_status_above() to byte-based, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 13/23] qemu-img: Simplify logic in img_compare(),
Eric Blake <=
- [Qemu-block] [PATCH v4 14/23] qemu-img: Speed up compare on pre-allocated larger file, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 12/23] block: Convert bdrv_get_block_status_above() to bytes, Eric Blake, 2017/09/13
- [Qemu-block] [PATCH v4 15/23] qemu-img: Add find_nonzero(), Eric Blake, 2017/09/13