qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-block] [PULL 21/61] qcow2: Allow reading both COW regions with onl


From: Kevin Wolf
Subject: [Qemu-block] [PULL 21/61] qcow2: Allow reading both COW regions with only one request
Date: Fri, 23 Jun 2017 18:21:19 +0200

From: Alberto Garcia <address@hidden>

Reading both COW regions requires two separate requests, but it's
perfectly possible to merge them and perform only one. This generally
improves performance, particularly on rotating disk drives. The
downside is that the data in the middle region is read but discarded.

This patch takes a conservative approach and only merges reads when
the size of the middle region is <= 16KB.

Signed-off-by: Alberto Garcia <address@hidden>
Reviewed-by: Kevin Wolf <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
 block/qcow2-cluster.c | 51 ++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 38 insertions(+), 13 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 3c9ace8..20fb531 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -777,20 +777,38 @@ static int perform_cow(BlockDriverState *bs, QCowL2Meta 
*m)
     Qcow2COWRegion *start = &m->cow_start;
     Qcow2COWRegion *end = &m->cow_end;
     unsigned buffer_size;
+    unsigned data_bytes = end->offset - (start->offset + start->nb_bytes);
+    bool merge_reads;
     uint8_t *start_buffer, *end_buffer;
     int ret;
 
     assert(start->nb_bytes <= UINT_MAX - end->nb_bytes);
+    assert(start->nb_bytes + end->nb_bytes <= UINT_MAX - data_bytes);
+    assert(start->offset + start->nb_bytes <= end->offset);
 
     if (start->nb_bytes == 0 && end->nb_bytes == 0) {
         return 0;
     }
 
-    /* Reserve a buffer large enough to store the data from both the
-     * start and end COW regions. Add some padding in the middle if
-     * necessary to make sure that the end region is optimally aligned */
-    buffer_size = QEMU_ALIGN_UP(start->nb_bytes, bdrv_opt_mem_align(bs)) +
-        end->nb_bytes;
+    /* If we have to read both the start and end COW regions and the
+     * middle region is not too large then perform just one read
+     * operation */
+    merge_reads = start->nb_bytes && end->nb_bytes && data_bytes <= 16384;
+    if (merge_reads) {
+        buffer_size = start->nb_bytes + data_bytes + end->nb_bytes;
+    } else {
+        /* If we have to do two reads, add some padding in the middle
+         * if necessary to make sure that the end region is optimally
+         * aligned. */
+        size_t align = bdrv_opt_mem_align(bs);
+        assert(align > 0 && align <= UINT_MAX);
+        assert(QEMU_ALIGN_UP(start->nb_bytes, align) <=
+               UINT_MAX - end->nb_bytes);
+        buffer_size = QEMU_ALIGN_UP(start->nb_bytes, align) + end->nb_bytes;
+    }
+
+    /* Reserve a buffer large enough to store all the data that we're
+     * going to read */
     start_buffer = qemu_try_blockalign(bs, buffer_size);
     if (start_buffer == NULL) {
         return -ENOMEM;
@@ -799,15 +817,22 @@ static int perform_cow(BlockDriverState *bs, QCowL2Meta 
*m)
     end_buffer = start_buffer + buffer_size - end->nb_bytes;
 
     qemu_co_mutex_unlock(&s->lock);
-    /* First we read the existing data from both COW regions */
-    ret = do_perform_cow_read(bs, m->offset, start->offset,
-                              start_buffer, start->nb_bytes);
-    if (ret < 0) {
-        goto fail;
-    }
+    /* First we read the existing data from both COW regions. We
+     * either read the whole region in one go, or the start and end
+     * regions separately. */
+    if (merge_reads) {
+        ret = do_perform_cow_read(bs, m->offset, start->offset,
+                                  start_buffer, buffer_size);
+    } else {
+        ret = do_perform_cow_read(bs, m->offset, start->offset,
+                                  start_buffer, start->nb_bytes);
+        if (ret < 0) {
+            goto fail;
+        }
 
-    ret = do_perform_cow_read(bs, m->offset, end->offset,
-                              end_buffer, end->nb_bytes);
+        ret = do_perform_cow_read(bs, m->offset, end->offset,
+                                  end_buffer, end->nb_bytes);
+    }
     if (ret < 0) {
         goto fail;
     }
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]