[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-block] [PATCH v3 06/11] mirror: Add 'job-id' parameter to 'blo
From: |
Max Reitz |
Subject: |
Re: [Qemu-block] [PATCH v3 06/11] mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror' |
Date: |
Sat, 2 Jul 2016 16:30:06 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.1.1 |
On 01.07.2016 17:52, Alberto Garcia wrote:
> This patch adds a new optional 'job-id' parameter to 'blockdev-mirror'
> and 'drive-mirror', allowing the user to specify the ID of the block
> job to be created.
>
> The HMP 'drive_mirror' command remains unchanged.
>
> Signed-off-by: Alberto Garcia <address@hidden>
> Reviewed-by: Max Reitz <address@hidden>
> Reviewed-by: Eric Blake <address@hidden>
> ---
> block/mirror.c | 15 ++++++++-------
> blockdev.c | 15 ++++++++-------
> hmp.c | 2 +-
> include/block/block_int.h | 6 ++++--
> qapi/block-core.json | 10 +++++++---
> qmp-commands.hx | 8 +++++---
> 6 files changed, 33 insertions(+), 23 deletions(-)
>
[...]
> diff --git a/include/block/block_int.h b/include/block/block_int.h
> index 549b1ed..dd45fec 100644
> --- a/include/block/block_int.h
> +++ b/include/block/block_int.h
> @@ -680,6 +680,8 @@ void commit_active_start(BlockDriverState *bs,
> BlockDriverState *base,
> void *opaque, Error **errp);
> /*
> * mirror_start:
> + * @job_id: The id of the newly-created job, or %NULL to have one
> + * generated automatically.
No, NULL to use the device name (same in the three following patches).
> * @bs: Block device to operate on.
> * @target: Block device to write to.
> * @replaces: Block graph node name to replace once the mirror is done. Can
> @@ -701,8 +703,8 @@ void commit_active_start(BlockDriverState *bs,
> BlockDriverState *base,
> * manually completed. At the end of a successful mirroring job,
> * @bs will be switched to read from @target.
> */
> -void mirror_start(BlockDriverState *bs, BlockDriverState *target,
> - const char *replaces,
> +void mirror_start(const char *job_id, BlockDriverState *bs,
> + BlockDriverState *target, const char *replaces,
> int64_t speed, uint32_t granularity, int64_t buf_size,
> MirrorSyncMode mode, BlockMirrorBackingMode backing_mode,
> BlockdevOnError on_source_error,
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 98a20d2..6f015c8 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -1108,6 +1108,8 @@
> #
> # Start mirroring a block device's writes to a new destination.
> #
> +# @job-id: #optional identifier for the newly-created block job (Since 2.7)
You should probably mention that this defaults to @device (as below and
in the three following patches).
Max
> +#
> # @device: the name of the device whose writes should be mirrored.
> #
> # @target: the target of the new image. If the file exists, or if it
> @@ -1160,8 +1162,8 @@
> # Since 1.3
> ##
> { 'command': 'drive-mirror',
> - 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
> - '*node-name': 'str', '*replaces': 'str',
> + 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
> + '*format': 'str', '*node-name': 'str', '*replaces': 'str',
> 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
> '*speed': 'int', '*granularity': 'uint32',
> '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
> @@ -1243,6 +1245,8 @@
> #
> # Start mirroring a block device's writes to a new destination.
> #
> +# @job-id: #optional identifier for the newly-created block job (Since 2.7)
> +#
> # @device: the name of the device whose writes should be mirrored.
> #
> # @target: the id or node-name of the block device to mirror to. This
> mustn't be
> @@ -1279,7 +1283,7 @@
> # Since 2.6
> ##
> { 'command': 'blockdev-mirror',
> - 'data': { 'device': 'str', 'target': 'str',
> + 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
> '*replaces': 'str',
> 'sync': 'MirrorSyncMode',
> '*speed': 'int', '*granularity': 'uint32',
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index 6937e83..d9a9510 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -1656,8 +1656,8 @@ EQMP
>
> {
> .name = "drive-mirror",
> - .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
> - "node-name:s?,replaces:s?,"
> + .args_type = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
> + "format:s?,node-name:s?,replaces:s?,"
> "on-source-error:s?,on-target-error:s?,"
> "unmap:b?,"
> "granularity:i?,buf-size:i?",
> @@ -1677,6 +1677,7 @@ of the source.
>
> Arguments:
>
> +- "job-id": identifier for the newly-created block job (json-string,
> optional)
> - "device": device name to operate on (json-string)
> - "target": name of new image file (json-string)
> - "format": format of new image (json-string, optional)
> @@ -1720,7 +1721,7 @@ EQMP
>
> {
> .name = "blockdev-mirror",
> - .args_type = "sync:s,device:B,target:B,replaces:s?,speed:i?,"
> + .args_type =
> "job-id:s?,sync:s,device:B,target:B,replaces:s?,speed:i?,"
> "on-source-error:s?,on-target-error:s?,"
> "granularity:i?,buf-size:i?",
> .mhandler.cmd_new = qmp_marshal_blockdev_mirror,
> @@ -1735,6 +1736,7 @@ specifies the target of mirror operation.
>
> Arguments:
>
> +- "job-id": identifier for the newly-created block job (json-string,
> optional)
> - "device": device name to operate on (json-string)
> - "target": device name to mirror to (json-string)
> - "replaces": the block driver node name to replace when finished
>
signature.asc
Description: OpenPGP digital signature
- Re: [Qemu-block] [PATCH v3 04/11] block: Use block_job_get() in find_block_job(), (continued)
[Qemu-block] [PATCH v3 11/11] blockjob: Update description of the 'device' field in the QMP API, Alberto Garcia, 2016/07/01
[Qemu-block] [PATCH v3 03/11] blockjob: Add block_job_get(), Alberto Garcia, 2016/07/01
[Qemu-block] [PATCH v3 08/11] stream: Add 'job-id' parameter to 'block-stream', Alberto Garcia, 2016/07/01
[Qemu-block] [PATCH v3 07/11] backup: Add 'job-id' parameter to 'blockdev-backup' and 'drive-backup', Alberto Garcia, 2016/07/01
[Qemu-block] [PATCH v3 06/11] mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror', Alberto Garcia, 2016/07/01
- Re: [Qemu-block] [PATCH v3 06/11] mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror',
Max Reitz <=
Re: [Qemu-block] [PATCH v3 00/11] Allow creating block jobs with a user-defined ID, Kevin Wolf, 2016/07/04