[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PATCH 2/4] ahci: handle LIST_ON and FIS_ON in map helpers
From: |
John Snow |
Subject: |
[Qemu-block] [PATCH 2/4] ahci: handle LIST_ON and FIS_ON in map helpers |
Date: |
Fri, 29 Jan 2016 16:41:27 -0500 |
Instead of relying on ahci_cond_start_engines to maintain the
engine status indicators itself, have the lower-layer CLB and FIS mapper
helpers do it themselves.
This makes the cond_start routine slightly nicer to read, and makes sure
that the status indicators will always be correct.
Signed-off-by: John Snow <address@hidden>
---
hw/ide/ahci.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index cdc9299..0653396 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -209,9 +209,7 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
AHCIPortRegs *pr = &ad->port_regs;
if (pr->cmd & PORT_CMD_START) {
- if (ahci_map_clb_address(ad)) {
- pr->cmd |= PORT_CMD_LIST_ON;
- } else {
+ if (!ahci_map_clb_address(ad)) {
error_report("AHCI: Failed to start DMA engine: "
"bad command list buffer address");
return -1;
@@ -219,7 +217,6 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
} else if (pr->cmd & PORT_CMD_LIST_ON) {
if (allow_stop) {
ahci_unmap_clb_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_LIST_ON);
} else {
error_report("AHCI: DMA engine should be off, "
"but appears to still be running");
@@ -228,9 +225,7 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
}
if (pr->cmd & PORT_CMD_FIS_RX) {
- if (ahci_map_fis_address(ad)) {
- pr->cmd |= PORT_CMD_FIS_ON;
- } else {
+ if (!ahci_map_fis_address(ad)) {
error_report("AHCI: Failed to start FIS receive engine: "
"bad FIS receive buffer address");
return -1;
@@ -238,7 +233,6 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
} else if (pr->cmd & PORT_CMD_FIS_ON) {
if (allow_stop) {
ahci_unmap_fis_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_FIS_ON);
} else {
error_report("AHCI: FIS receive engine should be off, "
"but appears to still be running");
@@ -656,7 +650,13 @@ static bool ahci_map_fis_address(AHCIDevice *ad)
AHCIPortRegs *pr = &ad->port_regs;
map_page(ad->hba->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
- return ad->res_fis != NULL;
+ if (ad->res_fis != NULL) {
+ pr->cmd |= PORT_CMD_FIS_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_FIS_ON;
+ return false;
}
static void ahci_unmap_fis_address(AHCIDevice *ad)
@@ -665,6 +665,7 @@ static void ahci_unmap_fis_address(AHCIDevice *ad)
DPRINTF(ad->port_no, "Attempt to unmap NULL FIS address\n");
return;
}
+ ad->port_regs.cmd &= ~PORT_CMD_FIS_ON;
dma_memory_unmap(ad->hba->as, ad->res_fis, 256,
DMA_DIRECTION_FROM_DEVICE, 256);
ad->res_fis = NULL;
@@ -676,7 +677,13 @@ static bool ahci_map_clb_address(AHCIDevice *ad)
ad->cur_cmd = NULL;
map_page(ad->hba->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
- return ad->lst != NULL;
+ if (ad->lst != NULL) {
+ pr->cmd |= PORT_CMD_LIST_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_LIST_ON;
+ return false;
}
static void ahci_unmap_clb_address(AHCIDevice *ad)
@@ -685,6 +692,7 @@ static void ahci_unmap_clb_address(AHCIDevice *ad)
DPRINTF(ad->port_no, "Attempt to unmap NULL CLB address\n");
return;
}
+ ad->port_regs.cmd &= ~PORT_CMD_LIST_ON;
dma_memory_unmap(ad->hba->as, ad->lst, 1024,
DMA_DIRECTION_FROM_DEVICE, 1024);
ad->lst = NULL;
--
2.4.3