qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-block] another isa-fdc problem...


From: Laszlo Ersek
Subject: [Qemu-block] another isa-fdc problem...
Date: Fri, 19 Jun 2015 20:17:35 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0

With Eduardo's recent patch (473a49460db0a90bfda046b8f3662b49f94098eb),
q35 machtypes earlier than 2.4 work as expected. Also, pc-q35-2.4 works
fine in the default case (no board-default FDC, which is what we want),
and the traditional option "-drive if=floppy,..." also works as expected.

However, Ján noticed that on pc-q35-2.4, the "canonical"
frontend/backend option pair

  -device isa-fdc,driveA=drive-fdc0-0-0 \
  -drive file=...,if=none,id=drive-fdc0-0-0,format=raw

breaks guest OS detection of the FDC. Markus has now verified that the
qtree looks good (thanks for that), but the guest still doesn't notice
the FDC.

In <https://bugzilla.redhat.com/show_bug.cgi?id=1227880#c8> and
<https://bugzilla.redhat.com/show_bug.cgi?id=1227880#c9> I wrote:

> If you create an isa-fdc *outside* of the board init code, ie. outside
> of the pc_q35_init() function, then in the following call chain:
>
> pc_q35_init()
>   pc_basic_device_init()
>   pc_cmos_init()
>     ...
>     rtc_set_memory(s, 0x10, val);
>
> the value stored at 0x10 in CMOS will not reflect the floppy. This is
> probably what trips up a guest OS -- they look to the CMOS for seeing
> floppy presence.
>
> http://wiki.osdev.org/CMOS#Register_0x10
> http://www.osdever.net/tutorials/view/detecting-floppy-drives
>
> In the guest kernel, "drivers/block/floppy.c" seems to be a heavy user
> of CMOS too.
>
> [...]
>
> BTW I did know (and document, in
> fd53c87cf6651b0dfe9f5107cfe77d2f697bd4f6) that pc_cmos_init() would
> get NULL for "floppy" (ie. FDC) if the board-default FDC was absent.
> What I didn't expect was that this would prevent a guest OS from
> seeing an FDC (without special module parameters) that was created
> differently.
>
> [...]

Thus, I didn't regress earlier machine types, nor earlier command lines
with the new pc-q35-2.4 machine type, but I also didn't get right the
behavior for the "canonical" options that libvirt will want to use.
Markus suggested a way to fix that:

  off the cuff: the floppy code needs to move from pc_cmos_init() to
  pc_cmos_init_late(), and find the isa-fdc regardless of how it was
  added ... may have to walk qom data structures

But before I try to do that, I looked at any preexistent test cases.

Sure enough, tests/fdc-test.c catches this (in the "cmos" test), *if*
you hack it to start QEMU with -M q35. Therefore my first question is
what the best practice is for running a set of tests on different
machine types.

QOSState / set_context() / qtest_pc_vboot() seem relevant (example:
"ahci-test.c"), but
- they also appear quite heavy weight,
- I'd lose (or have to open-code) the default options from qtest_init(),
- and I'd like to avoid:
  - starting a separate qemu process for each single test,
  - starting the necessary minimum number of qemu processes *in
    parallel*.

So some way would be necessary where I can add a bunch of test cases for
different machine types, and gtester would stop the old qemu instance
and start the new qemu instance between tests when it notices that the
machine type changes from the previous test. I vaguely recall having
done something with GTester fixtures in the opts-visitor test, but it's
foggy. So, what's the best practice for this? Of course I could just
share data between tests, but that doesn't appear nice.

My other question: we're past the 2.4 soft freeze; if I can't fix this
until the hard freeze, how big a problem is that? The "new" way won't be
available in 2.4, but the "old" ways should work.

(... Oh geez why did I touch the FDC. :()

Thanks
Laszlo



reply via email to

[Prev in Thread] Current Thread [Next in Thread]