qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 08/12] aspeed: Create flash devices only when defaults are ena


From: Cédric Le Goater
Subject: [PATCH v2 08/12] aspeed: Create flash devices only when defaults are enabled
Date: Wed, 7 Jun 2023 06:39:39 +0200

When the -nodefaults option is set, flash devices should be created
with :

    -blockdev node-name=fmc0,driver=file,filename=./flash.img \
    -device mx66u51235f,addr=0x0,bus=ssi.0,drive=fmc0 \

To be noted that in this case, the ROM will not be installed and the
initial boot sequence (U-Boot loading) will fetch instructions using
SPI transactions which is significantly slower. That's exactly how HW
operates though.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index e5a49bb0b1a7..efc112ca37b0 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -387,12 +387,14 @@ static void aspeed_machine_init(MachineState *machine)
     connect_serial_hds_to_uarts(bmc);
     qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
 
-    aspeed_board_init_flashes(&bmc->soc.fmc,
+    if (defaults_enabled()) {
+        aspeed_board_init_flashes(&bmc->soc.fmc,
                               bmc->fmc_model ? bmc->fmc_model : amc->fmc_model,
                               amc->num_cs, 0);
-    aspeed_board_init_flashes(&bmc->soc.spi[0],
+        aspeed_board_init_flashes(&bmc->soc.spi[0],
                               bmc->spi_model ? bmc->spi_model : amc->spi_model,
                               1, amc->num_cs);
+    }
 
     if (machine->kernel_filename && sc->num_cpus > 1) {
         /* With no u-boot we must set up a boot stub for the secondary CPU */
-- 
2.40.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]