[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH-for-6.2?] docs: Render binary names as monospaced text
From: |
Darren Kenny |
Subject: |
Re: [PATCH-for-6.2?] docs: Render binary names as monospaced text |
Date: |
Thu, 18 Nov 2021 15:34:22 +0000 |
On Thursday, 2021-11-18 at 15:43:17 +01, Philippe Mathieu-Daudé wrote:
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
> ---
> docs/about/removed-features.rst | 8 ++++----
> docs/devel/build-system.rst | 6 +++---
> docs/devel/multi-process.rst | 6 +++---
> docs/devel/testing.rst | 8 ++++----
> docs/image-fuzzer.txt | 6 +++---
> docs/system/arm/orangepi.rst | 2 +-
> docs/system/images.rst | 2 +-
> docs/system/qemu-block-drivers.rst.inc | 6 +++---
> docs/system/tls.rst | 2 +-
> docs/tools/qemu-img.rst | 18 +++++++++---------
> docs/tools/qemu-nbd.rst | 4 ++--
> docs/tools/qemu-storage-daemon.rst | 7 ++++---
> docs/tools/virtiofsd.rst | 4 ++--
> 13 files changed, 40 insertions(+), 39 deletions(-)
>
> diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
> index 9d0d90c90d9..c02d1f6d494 100644
> --- a/docs/about/removed-features.rst
> +++ b/docs/about/removed-features.rst
> @@ -658,8 +658,8 @@ enforce that any failure to open the backing image
> (including if the
> backing file is missing or an incorrect format was specified) is an
> error when ``-u`` is not used.
>
> -qemu-img amend to adjust backing file (removed in 6.1)
> -''''''''''''''''''''''''''''''''''''''''''''''''''''''
> +``qemu-img`` amend to adjust backing file (removed in 6.1)
> +''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>
> The use of ``qemu-img amend`` to modify the name or format of a qcow2
> backing image was never fully documented or tested, and interferes
> @@ -670,8 +670,8 @@ backing chain should be performed with ``qemu-img rebase
> -u`` either
> before or after the remaining changes being performed by amend, as
> appropriate.
>
> -qemu-img backing file without format (removed in 6.1)
> -'''''''''''''''''''''''''''''''''''''''''''''''''''''
> +``qemu-img`` backing file without format (removed in 6.1)
> +'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
>
> The use of ``qemu-img create``, ``qemu-img rebase``, or ``qemu-img
> convert`` to create or modify an image that depends on a backing file
> diff --git a/docs/devel/build-system.rst b/docs/devel/build-system.rst
> index 7a83f5fc0db..431caba7aa0 100644
> --- a/docs/devel/build-system.rst
> +++ b/docs/devel/build-system.rst
> @@ -121,11 +121,11 @@ process for:
>
> 1) executables, which include:
>
> - - Tools - qemu-img, qemu-nbd, qga (guest agent), etc
> + - Tools - ``qemu-img``, ``qemu-nbd``, ``qga`` (guest agent), etc
>
> - - System emulators - qemu-system-$ARCH
> + - System emulators - ``qemu-system-$ARCH``
>
> - - Userspace emulators - qemu-$ARCH
> + - Userspace emulators - ``qemu-$ARCH``
>
> - Unit tests
>
> diff --git a/docs/devel/multi-process.rst b/docs/devel/multi-process.rst
> index e5758a79aba..2c5ec977df8 100644
> --- a/docs/devel/multi-process.rst
> +++ b/docs/devel/multi-process.rst
> @@ -187,9 +187,9 @@ desired, in which the emulation application should only
> be allowed to
> access the files or devices the VM it's running on behalf of can access.
> #### qemu-io model
>
> -Qemu-io is a test harness used to test changes to the QEMU block backend
> -object code. (e.g., the code that implements disk images for disk driver
> -emulation) Qemu-io is not a device emulation application per se, but it
> +``qemu-io`` is a test harness used to test changes to the QEMU block backend
> +object code (e.g., the code that implements disk images for disk driver
> +emulation). ``qemu-io`` is not a device emulation application per se, but it
> does compile the QEMU block objects into a separate binary from the main
> QEMU one. This could be useful for disk device emulation, since its
> emulation applications will need to include the QEMU block objects.
> diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
> index 60c59023e58..755343c7dd0 100644
> --- a/docs/devel/testing.rst
> +++ b/docs/devel/testing.rst
> @@ -564,11 +564,11 @@ exploiting a QEMU security bug to compromise the host.
> QEMU binaries
> ~~~~~~~~~~~~~
>
> -By default, qemu-system-x86_64 is searched in $PATH to run the guest. If
> there
> -isn't one, or if it is older than 2.10, the test won't work. In this case,
> +By default, ``qemu-system-x86_64`` is searched in $PATH to run the guest. If
> +there isn't one, or if it is older than 2.10, the test won't work. In this
> case,
> provide the QEMU binary in env var: ``QEMU=/path/to/qemu-2.10+``.
>
> -Likewise the path to qemu-img can be set in QEMU_IMG environment variable.
> +Likewise the path to ``qemu-img`` can be set in QEMU_IMG environment
> variable.
>
> Make jobs
> ~~~~~~~~~
> @@ -650,7 +650,7 @@ supported. To start the fuzzer, run
>
> tests/image-fuzzer/runner.py -c '[["qemu-img", "info", "$test_img"]]'
> /tmp/test qcow2
>
> -Alternatively, some command different from "qemu-img info" can be tested, by
> +Alternatively, some command different from ``qemu-img info`` can be tested,
> by
> changing the ``-c`` option.
>
> Integration tests using the Avocado Framework
> diff --git a/docs/image-fuzzer.txt b/docs/image-fuzzer.txt
> index 3e23ebec331..279cc8c807f 100644
> --- a/docs/image-fuzzer.txt
> +++ b/docs/image-fuzzer.txt
> @@ -51,10 +51,10 @@ assumes that core dumps will be generated in the current
> working directory.
> For comprehensive test results, please, set up your test environment
> properly.
>
> -Paths to binaries under test (SUTs) qemu-img and qemu-io are retrieved from
> -environment variables. If the environment check fails the runner will
> +Paths to binaries under test (SUTs) ``qemu-img`` and ``qemu-io`` are
> retrieved
> +from environment variables. If the environment check fails the runner will
> use SUTs installed in system paths.
> -qemu-img is required for creation of backing files, so it's mandatory to set
> +``qemu-img`` is required for creation of backing files, so it's mandatory to
> set
> the related environment variable if it's not installed in the system path.
> For details about environment variables see qemu-iotests/check.
>
> diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst
> index c55694dd91b..83c7445197b 100644
> --- a/docs/system/arm/orangepi.rst
> +++ b/docs/system/arm/orangepi.rst
> @@ -128,7 +128,7 @@ Alternatively, you can also choose to build you own image
> with buildroot
> using the orangepi_pc_defconfig. Also see https://buildroot.org for more
> information.
>
> When using an image as an SD card, it must be resized to a power of two.
> This can be
> -done with the qemu-img command. It is recommended to only increase the image
> size
> +done with the ``qemu-img`` command. It is recommended to only increase the
> image size
> instead of shrinking it to a power of two, to avoid loss of data. For
> example,
> to prepare a downloaded Armbian image, first extract it and then increase
> its size to one gigabyte as follows:
> diff --git a/docs/system/images.rst b/docs/system/images.rst
> index 3d9144e6258..d000bd6b6f1 100644
> --- a/docs/system/images.rst
> +++ b/docs/system/images.rst
> @@ -20,7 +20,7 @@ where myimage.img is the disk image filename and mysize is
> its size in
> kilobytes. You can add an ``M`` suffix to give the size in megabytes and
> a ``G`` suffix for gigabytes.
>
> -See the qemu-img invocation documentation for more information.
> +See the ``qemu-img`` invocation documentation for more information.
>
> .. _disk_005fimages_005fsnapshot_005fmode:
>
> diff --git a/docs/system/qemu-block-drivers.rst.inc
> b/docs/system/qemu-block-drivers.rst.inc
> index 16225710ebb..e313784426d 100644
> --- a/docs/system/qemu-block-drivers.rst.inc
> +++ b/docs/system/qemu-block-drivers.rst.inc
> @@ -511,13 +511,13 @@ of an inet socket:
>
> |qemu_system| linux.img -hdb nbd+unix://?socket=/tmp/my_socket
>
> -In this case, the block device must be exported using qemu-nbd:
> +In this case, the block device must be exported using ``qemu-nbd``:
>
> .. parsed-literal::
>
> qemu-nbd --socket=/tmp/my_socket my_disk.qcow2
>
> -The use of qemu-nbd allows sharing of a disk between several guests:
> +The use of ``qemu-nbd`` allows sharing of a disk between several guests:
>
> .. parsed-literal::
>
> @@ -530,7 +530,7 @@ and then you can use it with two guests:
> |qemu_system| linux1.img -hdb nbd+unix://?socket=/tmp/my_socket
> |qemu_system| linux2.img -hdb nbd+unix://?socket=/tmp/my_socket
>
> -If the nbd-server uses named exports (supported since NBD 2.9.18, or with
> QEMU's
> +If the ``nbd-server`` uses named exports (supported since NBD 2.9.18, or
> with QEMU's
> own embedded NBD server), you must specify an export name in the URI:
>
> .. parsed-literal::
> diff --git a/docs/system/tls.rst b/docs/system/tls.rst
> index b0973afe1bf..1a04674362e 100644
> --- a/docs/system/tls.rst
> +++ b/docs/system/tls.rst
> @@ -311,7 +311,7 @@ containing one or more usernames and random keys::
> mkdir -m 0700 /tmp/keys
> psktool -u rich -p /tmp/keys/keys.psk
>
> -TLS-enabled servers such as qemu-nbd can use this directory like so::
> +TLS-enabled servers such as ``qemu-nbd`` can use this directory like so::
>
> qemu-nbd \
> -t -x / \
> diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
> index c0a44431467..d663dd92bd7 100644
> --- a/docs/tools/qemu-img.rst
> +++ b/docs/tools/qemu-img.rst
> @@ -127,9 +127,9 @@ by the used format or see the format descriptions below
> for details.
> .. option:: -S SIZE
>
> Indicates the consecutive number of bytes that must contain only zeros
> - for qemu-img to create a sparse image during conversion. This value is
> rounded
> - down to the nearest 512 bytes. You may use the common size suffixes like
> - ``k`` for kilobytes.
> + for ``qemu-img`` to create a sparse image during conversion. This value is
> + rounded down to the nearest 512 bytes. You may use the common size suffixes
> + like ``k`` for kilobytes.
>
> .. option:: -t CACHE
>
> @@ -431,7 +431,7 @@ Command description:
> suppressed from the destination image.
>
> *SPARSE_SIZE* indicates the consecutive number of bytes (defaults to 4k)
> - that must contain only zeros for qemu-img to create a sparse image during
> + that must contain only zeros for ``qemu-img`` to create a sparse image
> during
> conversion. If *SPARSE_SIZE* is 0, the source will not be scanned for
> unallocated or zero sectors, and the destination image will always be
> fully allocated.
> @@ -447,7 +447,7 @@ Command description:
> If the ``-n`` option is specified, the target volume creation will be
> skipped. This is useful for formats such as ``rbd`` if the target
> volume has already been created with site specific options that cannot
> - be supplied through qemu-img.
> + be supplied through ``qemu-img``.
>
> Out of order writes can be enabled with ``-W`` to improve performance.
> This is only recommended for preallocated devices like host devices or
> other
> @@ -472,7 +472,7 @@ Command description:
> If the option *BACKING_FILE* is specified, then the image will record
> only the differences from *BACKING_FILE*. No size needs to be specified in
> this case. *BACKING_FILE* will never be modified unless you use the
> - ``commit`` monitor command (or qemu-img commit).
> + ``commit`` monitor command (or ``qemu-img commit``).
>
> If a relative path name is given, the backing file is looked up relative to
> the directory containing *FILENAME*.
> @@ -684,7 +684,7 @@ Command description:
>
> Safe mode
> This is the default mode and performs a real rebase operation. The
> - new backing file may differ from the old one and qemu-img rebase
> + new backing file may differ from the old one and ``qemu-img rebase``
> will take care of keeping the guest-visible content of *FILENAME*
> unchanged.
>
> @@ -697,7 +697,7 @@ Command description:
> exists.
>
> Unsafe mode
> - qemu-img uses the unsafe mode if ``-u`` is specified. In this
> + ``qemu-img`` uses the unsafe mode if ``-u`` is specified. In this
> mode, only the backing file name and format of *FILENAME* is changed
> without any checks on the file contents. The user must take care of
> specifying the correct new backing file, or the guest-visible
> @@ -735,7 +735,7 @@ Command description:
> sizes accordingly. Failure to do so will result in data loss!
>
> When shrinking images, the ``--shrink`` option must be given. This informs
> - qemu-img that the user acknowledges all loss of data beyond the truncated
> + ``qemu-img`` that the user acknowledges all loss of data beyond the
> truncated
> image's end.
>
> After using this command to grow a disk image, you must use file system and
> diff --git a/docs/tools/qemu-nbd.rst b/docs/tools/qemu-nbd.rst
> index 56e54cd4411..a1eebbce4fa 100644
> --- a/docs/tools/qemu-nbd.rst
> +++ b/docs/tools/qemu-nbd.rst
> @@ -38,7 +38,7 @@ driver options if ``--image-opts`` is specified.
> supported. The common object types that it makes sense to define are the
> ``secret`` object, which is used to supply passwords and/or encryption
> keys, and the ``tls-creds`` object, which is used to supply TLS
> - credentials for the qemu-nbd server or client.
> + credentials for the ``qemu-nbd`` server or client.
>
> .. option:: -p, --port=PORT
>
> @@ -238,7 +238,7 @@ daemon:
> Expose the guest-visible contents of a qcow2 file via a block device
> /dev/nbd0 (and possibly creating /dev/nbd0p1 and friends for
> partitions found within), then disconnect the device when done.
> -Access to bind qemu-nbd to an /dev/nbd device generally requires root
> +Access to bind ``qemu-nbd`` to an /dev/nbd device generally requires root
> privileges, and may also require the execution of ``modprobe nbd``
> to enable the kernel NBD client module. *CAUTION*: Do not use
> this method to mount filesystems from an untrusted guest image - a
> diff --git a/docs/tools/qemu-storage-daemon.rst
> b/docs/tools/qemu-storage-daemon.rst
> index b8ef4486f1e..3e5a9dc0320 100644
> --- a/docs/tools/qemu-storage-daemon.rst
> +++ b/docs/tools/qemu-storage-daemon.rst
> @@ -10,9 +10,10 @@ Synopsis
> Description
> -----------
>
> -qemu-storage-daemon provides disk image functionality from QEMU, qemu-img,
> and
> -qemu-nbd in a long-running process controlled via QMP commands without
> running
> -a virtual machine. It can export disk images, run block job operations, and
> +``qemu-storage-daemon`` provides disk image functionality from QEMU,
> +``qemu-img``, and ``qemu-nbd`` in a long-running process controlled via QMP
> +commands without running a virtual machine.
> +It can export disk images, run block job operations, and
> perform other disk-related operations. The daemon is controlled via a QMP
> monitor and initial configuration from the command-line.
>
> diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst
> index cc314028309..07ac0be5511 100644
> --- a/docs/tools/virtiofsd.rst
> +++ b/docs/tools/virtiofsd.rst
> @@ -136,8 +136,8 @@ Extended attribute (xattr) mapping
> By default the name of xattr's used by the client are passed through to the
> server
> file system. This can be a problem where either those xattr names are used
> by something on the server (e.g. selinux client/server confusion) or if the
> -virtiofsd is running in a container with restricted privileges where it
> cannot
> -access some attributes.
> +``virtiofsd`` is running in a container with restricted privileges where it
> +cannot access some attributes.
>
> Mapping syntax
> ~~~~~~~~~~~~~~
> --
> 2.31.1