|Subject:||Re: [PATCH] hw/arm/virt: Allow additions to the generated device tree|
|Date:||Fri, 5 Nov 2021 16:50:58 +0100|
Hi,Thanks Alex to patch me in.I'd like to present another perspective on the motivation as I can't really comment on the actual "how".On real Arm boards, firmware is often assembled into a FIP.That FIP can contain quite a good deal of things, including an NT_FW_CONFIG, NonTrusted_FirmWare_CONFIGuration (NT_FW = BL33 which is U-Boot in our case).So the expected typical content for that section is a DT fragment/overlay.That section is to be used in different ways but one is https://trustedfirmware-a.readthedocs.io/en/latest/components/fconf/index.html.For SystemReady systems we will almost inevitably put a device tree fragment in this section and have BL2 merge it with the board DT before handing it over to BL33 (U-Boot is one of them).In some real world examples based on carrier board + som for instance, it may contain SerDes configuration for U-Boot that will result in appropriate PCI lanes or MDIO lanes for the booted OS.So I could say there is precedence in Simon's effort.In any case, when we will have made the changes in TFA for the SystemReady boards we work on, booting the full SystemReady stack (TFA, OP-TEE, U-Boot) on Qemu will allow that late merge based through the FIP.Other boot flows such as VBE (without TFA but with TPL/SPL/U-Boot proper) need a similar facility.
Hence I am supporting Simon's proposal at least on the intent. On the how exactly, that is outside my skillset.
future comments belowOn Wed, 3 Nov 2021 at 12:48, Alex Bennée <email@example.com> wrote:
Peter Maydell <firstname.lastname@example.org> writes:
> On Mon, 27 Sept 2021 at 16:18, Simon Glass <email@example.com> wrote:
>> On Mon, 27 Sept 2021 at 02:48, Peter Maydell <firstname.lastname@example.org> wrote:
>> > So what is missing in the QEMU-provided DTB that it needs?
>> Quite a lot. Here are some examples:
>> U-Boot has limited pre-relocation memory so tries to avoid
>> binding/probing devices that are not used before relocation:
> It's up to u-boot to decide what it wants to touch and
> what it does not. QEMU tells u-boot what all the available
> devices are; I don't think we should have extra stuff saying
> "and if you are u-boot, do something odd".
>> There is a configuration node (which is likely to change form in
>> future releases, but will still be there)
> I think u-boot should be storing this kind of thing somewhere
> else (e.g. as part of the binary blob that is u-boot itself,
> or stored in flash or RAM as a separate blob).
>> Then there are various features which put things in U-Boot's control
>> dtb, such as verified boot, which adds public keys during signing:
>> More generally, the U-Boot tree has hundreds of files which add
>> properties for each board, since we try to keep the U-Boot-specific
>> things out of the Linux tree:
>> $ find . -name *u-boot.dtsi |wc -l
> If any of this is actual information about the hardware then you
> should sort out getting the bindings documented officially
> (which I think is still in the Linux tree), and then QEMU can
> provide them.
>> Quite a bit of this is to do with SPL and so far it seems that QEMU
>> mostly runs U-Boot proper only, although I see that SPL is starting to
>> creep in too in the U-Boot CI.
>> So at present QEMU is not able to support U-Boot fully.
> My take is that this is u-boot doing weird custom things with
> the DTB that aren't "describe the hardware". You should be able
> to boot u-boot by putting those custom DTB extra things in a
> separate blob and having u-boot combine that with the
> actual DTB when it starts.
It's not entirely without precedent - for SPL (which I hope is secondary
program loading) we have things like the guest loader which expands the
plain HW DTB with some information needed by the bootloader and the
primary OS to load additional blobs which have been put into memory.
In effect the DTB is being expanded as a signalling mechanism similar to
things like fw_cfg and other things we use to control boot up. Whether
this affects the "purity" of DTB as a "just the HW" description is
probably a philosophical question.
More than a philosophical question: a key aspect of supply chain that need change fromquite inflexible and tightly coupled to loosely coupled.A key aspect of it is to maintain "pure" hardware description DTBs at rest.Composition of DTBs at build time (for products) or runtime (for development boards) should be a simple thing.Another aspect to take into account is System Device Trees. U-Boot only deal with Cortex-As on a platform,so there are multiple device trees for each compute domain. Communities are working on System Device Treeto define the overall platform with its power and clock domains. A tool "lopper" is being developed to slide the SDT into diverse domain DTs.One of them being included into the FIP as the basis for the computing element (Carrier, SoM...).Those attempts to cleanup passed DTBs from configuration data (drivers, bootloaders...) is not incompatiblewith merging fragments at runtime (for dev boards) or build time (for products).I agree with Peter that just allowing the merging of arbitrary data into
the QEMU generated DTB is going to lead to confusion and breakages.
Indeed I wrote the guest-loader because instructions for booting Xen up
until that point involved dumpdtb and hand hacking the data which was
silly because this is stuff QEMU already knew about.
> -- PMM
|[Prev in Thread]||Current Thread||[Next in Thread]|