Re: [PATCH 21/24] hw/block: m25p80: Add support for mt25qu02g

[Francisco Iglesias]

Hello Cedric!

On Wed, Apr 07, 2021 at 07:16:34PM +0200, Cédric Le Goater wrote:
> The Micron mt25qu02g is a 3V 2Gb serial NOR flash memory supporting
> dual I/O and quad I/O, 4KB, 32KB, 64KB sector erase. It also supports
> 4B opcodes.
> 
> Cc: Alistair Francis <alistair.francis@wdc.com>
> Cc: Francisco Iglesias <francisco.iglesias@xilinx.com>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  hw/block/m25p80.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index 183d3f44c259..2afb939ae28e 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -259,6 +259,7 @@ static const FlashPartInfo known_devices[] = {
>      { INFO_STACKED("n25q00a",   0x20bb21, 0x1000, 64 << 10, 2048, ER_4K, 4) 
> },
>      { INFO_STACKED("mt25ql01g", 0x20ba21, 0x1040, 64 << 10, 2048, ER_4K, 2) 
> },
>      { INFO_STACKED("mt25qu01g", 0x20bb21, 0x1040, 64 << 10, 2048, ER_4K, 2) 
> },
> +    { INFO_STACKED("mt25qu02g", 0x20ba22, 0x1040, 64 << 10, 4096, ER_4K, 2) 
> },

Is it possible it should be as below instead?

{ INFO_STACKED("mt25qu02g", 0x20bb22, 0x1040, 64 << 10, 4096, ER_4K | ER_32K, 
2) },

's/0x20ba22/0x20bb22/' (or 's/mt25qu02g/mt25ql02g/') since 'u' looks to stand
for 1.7-2.0 V and 'bb' for 1.8 V (see page 2 and 32 in [1]).

s/ER_4K/ER_4K | ER_32K/ since ERASE_32K is supported (see page 36). 

If you find above changes ok and go with them please add:

Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>

Best regards,
Francisco Iglesias

[1] Micron Serial NOR Flash Memory 1.8V, Multiple I/O, 64KB Sector Erase 
MT25QU02GCBB
    
https://4donline.ihs.com/images/VipMasterIC/IC/MICT/MICT-S-A0008500026/MICT-S-A0008511423-1.pdf?hkey=52A5661711E402568146F3353EA87419

>  
>      /* Spansion -- single (large) sector size only, at least
>       * for the chips listed here (without boot sectors).
> -- 
> 2.26.3
>