[PATCH] target/arm: Make number of counters in PMCR follow the CPU

[Peter Maydell]

Currently we give all the v7-and-up CPUs a PMU with 4 counters.  This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.

Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.

This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.

Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset.  This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
This is pretty much untested (I just checked Linux still boots;
haven't tried it with KVM either). It's an alternative to
just bumping PMCR_NUM_COUNTERS to 6.
---
 target/arm/cpu.h     |  1 +
 target/arm/cpu64.c   |  3 +++
 target/arm/cpu_tcg.c |  5 +++++
 target/arm/helper.c  | 29 +++++++++++++++++------------
 target/arm/kvm64.c   |  2 ++
 5 files changed, 28 insertions(+), 12 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 193a49ec7fa..fe68f464b3a 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -942,6 +942,7 @@ struct ARMCPU {
         uint64_t id_aa64mmfr2;
         uint64_t id_aa64dfr0;
         uint64_t id_aa64dfr1;
+        uint64_t reset_pmcr_el0;
     } isar;
     uint64_t midr;
     uint32_t revidr;
diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index f0a9e968c9c..5d9d56a33c3 100644
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -141,6 +141,7 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->isar.reset_pmcr_el0 = 0x41013000;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
@@ -194,6 +195,7 @@ static void aarch64_a53_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->isar.reset_pmcr_el0 = 0x41033000;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
@@ -245,6 +247,7 @@ static void aarch64_a72_initfn(Object *obj)
     cpu->gic_num_lrs = 4;
     cpu->gic_vpribits = 5;
     cpu->gic_vprebits = 5;
+    cpu->isar.reset_pmcr_el0 = 0x41023000;
     define_arm_cp_regs(cpu, cortex_a72_a57_a53_cp_reginfo);
 }
 
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index 046e476f65f..8252fd29f90 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -301,6 +301,7 @@ static void cortex_a8_initfn(Object *obj)
     cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
     cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
     cpu->reset_auxcr = 2;
+    cpu->isar.reset_pmcr_el0 = 0x41002000;
     define_arm_cp_regs(cpu, cortexa8_cp_reginfo);
 }
 
@@ -373,6 +374,7 @@ static void cortex_a9_initfn(Object *obj)
     cpu->clidr = (1 << 27) | (1 << 24) | 3;
     cpu->ccsidr[0] = 0xe00fe019; /* 16k L1 dcache. */
     cpu->ccsidr[1] = 0x200fe019; /* 16k L1 icache. */
+    cpu->isar.reset_pmcr_el0 = 0x41093000;
     define_arm_cp_regs(cpu, cortexa9_cp_reginfo);
 }
 
@@ -443,6 +445,7 @@ static void cortex_a7_initfn(Object *obj)
     cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
     cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
     cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
+    cpu->isar.reset_pmcr_el0 = 0x41072000;
     define_arm_cp_regs(cpu, cortexa15_cp_reginfo); /* Same as A15 */
 }
 
@@ -485,6 +488,7 @@ static void cortex_a15_initfn(Object *obj)
     cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
     cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
     cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
+    cpu->isar.reset_pmcr_el0 = 0x410F3000;
     define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
 }
 
@@ -717,6 +721,7 @@ static void cortex_r5_initfn(Object *obj)
     cpu->isar.id_isar6 = 0x0;
     cpu->mp_is_up = true;
     cpu->pmsav7_dregion = 16;
+    cpu->isar.reset_pmcr_el0 = 0x41151800;
     define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
 }
 
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 904b0927cd2..2f3867cad79 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -38,7 +38,6 @@
 #endif
 
 #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */
-#define PMCR_NUM_COUNTERS 4 /* QEMU IMPDEF choice */
 
 #ifndef CONFIG_USER_ONLY
 
@@ -1149,7 +1148,9 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
 
 static inline uint32_t pmu_num_counters(CPUARMState *env)
 {
-  return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
+    ARMCPU *cpu = env_archcpu(env);
+
+    return (cpu->isar.reset_pmcr_el0 & PMCRN_MASK) >> PMCRN_SHIFT;
 }
 
 /* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */
@@ -5753,13 +5754,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
       .resetvalue = 0,
       .writefn = gt_hyp_ctl_write, .raw_writefn = raw_write },
 #endif
-    /* The only field of MDCR_EL2 that has a defined architectural reset value
-     * is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N.
-     */
-    { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL2_RW, .resetvalue = PMCR_NUM_COUNTERS,
-      .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2), },
     { .name = "HPFAR", .state = ARM_CP_STATE_AA32,
       .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
       .access = PL2_RW, .accessfn = access_el3_aa32ns,
@@ -6689,7 +6683,7 @@ static void define_pmu_regs(ARMCPU *cpu)
      * field as main ID register, and we implement four counters in
      * addition to the cycle count register.
      */
-    unsigned int i, pmcrn = PMCR_NUM_COUNTERS;
+    unsigned int i, pmcrn = pmu_num_counters(&cpu->env);
     ARMCPRegInfo pmcr = {
         .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
         .access = PL0_RW,
@@ -6704,10 +6698,10 @@ static void define_pmu_regs(ARMCPU *cpu)
         .access = PL0_RW, .accessfn = pmreg_access,
         .type = ARM_CP_IO,
         .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
-        .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT) |
-                      PMCRLC,
+        .resetvalue = cpu->isar.reset_pmcr_el0,
         .writefn = pmcr_write, .raw_writefn = raw_write,
     };
+
     define_one_arm_cp_reg(cpu, &pmcr);
     define_one_arm_cp_reg(cpu, &pmcr64);
     for (i = 0; i < pmcrn; i++) {
@@ -7825,6 +7819,17 @@ void register_cp_regs_for_features(ARMCPU *cpu)
               .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) },
             REGINFO_SENTINEL
         };
+        /*
+         * The only field of MDCR_EL2 that has a defined architectural reset
+         * value is MDCR_EL2.HPMN which should reset to the value of 
PMCR_EL0.N.
+         */
+        ARMCPRegInfo mdcr_el2 = {
+            .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
+            .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
+            .access = PL2_RW, .resetvalue = pmu_num_counters(env),
+            .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2),
+        };
+        define_one_arm_cp_reg(cpu, &mdcr_el2);
         define_arm_cp_regs(cpu, vpidr_regs);
         define_arm_cp_regs(cpu, el2_cp_reginfo);
         if (arm_feature(env, ARM_FEATURE_V8)) {
diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
index dff85f6db94..581335e49d3 100644
--- a/target/arm/kvm64.c
+++ b/target/arm/kvm64.c
@@ -566,6 +566,8 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
                               ARM64_SYS_REG(3, 0, 0, 7, 1));
         err |= read_sys_reg64(fdarray[2], &ahcf->isar.id_aa64mmfr2,
                               ARM64_SYS_REG(3, 0, 0, 7, 2));
+        err |= read_sys_reg64(fdarray[2], &ahcf->isar.reset_pmcr_el0,
+                              ARM64_SYS_REG(3, 3, 9, 12, 0));
 
         /*
          * Note that if AArch32 support is not present in the host,
-- 
2.20.1