qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 12/13] hw/arm/raspi: Add the Raspberry Pi B+ machine


From: Philippe Mathieu-Daudé
Subject: Re: [PATCH v2 12/13] hw/arm/raspi: Add the Raspberry Pi B+ machine
Date: Mon, 21 Sep 2020 18:45:59 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.11.0

On 2/24/20 9:55 AM, Philippe Mathieu-Daudé wrote:
> On 2/22/20 11:19 PM, Niek Linnenbank wrote:
>> Hey Philippe,
>>
>> Very nice to see that the Raspberry 1 will be supported again, thanks
>> for contributing this!
>>
>> I tried to bring up the machine using raspbian 2019-09-26. It ran
>> throught the early kernel initialisation
>> but for me it gets stuck at this point:
>>
>> ./arm-softmmu/qemu-system-arm -M raspi1b -kernel
>> $HOME/raspi/boot/kernel.img -append 'printk.time=0
>> earlycon=pl011,0x20201000 console=ttyAMA0 rootwait root=/dev/mmcblk0p2' \
>> -dtb $HOME/raspi/boot/bcm2708-rpi-b-plus.dtb -m 512 -sd
>> $HOME/raspi/2019-09-26-raspbian-buster-lite.img -serial stdio -s
>>
>> [    0.000000] Booting Linux on physical CPU 0x0
>> [    0.000000] Linux version 4.19.75+ (dom@buildbot) (gcc version
>> 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 Tue Sep 24
>> 18:38:54 BST 2019
>> [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7
>> (ARMv7), cr=00c5387d
>> [    0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
>> [    0.000000] OF: fdt: Machine model: Raspberry Pi Model B+
>> [    0.000000] earlycon: pl11 at MMIO 0x20201000 (options '')
>> [    0.000000] bootconsole [pl11] enabled
>> [    0.000000] Memory policy: Data cache writeback
>> [    0.000000] cma: Reserved 8 MiB at 0x1b800000
>> [    0.000000] random: get_random_bytes called from
>> start_kernel+0x8c/0x49c with crng_init=0
>> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages:
>> 113680
>> [    0.000000] Kernel command line: printk.time=0
>> earlycon=pl011,0x20201000 console=ttyAMA0 rootwait root=/dev/mmcblk0p2
>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> Memory: 434380K/458752K available (6973K kernel code, 635K rwdata,
>> 2080K rodata, 464K init, 797K bss, 16180K reserved, 8192K cma-reserved)
>> Virtual kernel memory layout:
>>      vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>>      fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>>      vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
>>      lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
>>      modules : 0xbf000000 - 0xc0000000   (  16 MB)
>>        .text : 0x(ptrval) - 0x(ptrval)   (6975 kB)
>>        .init : 0x(ptrval) - 0x(ptrval)   ( 464 kB)
>>        .data : 0x(ptrval) - 0x(ptrval)   ( 636 kB)
>>         .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
>> SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>> ftrace: allocating 25197 entries in 74 pages
>> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>> sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every
>> 2147483647500ns
>> clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff,
>> max_idle_ns: 1911260446275 ns
>> bcm2835: system timer (irq = 27)
>> Console: colour dummy device 80x30
>>
>> Maybe it should switch to the graphical console here, but I dont see
>> the boot splash logo either (when using -stdio instead of -nographic).
>> With -M raspi2 and -dtb bcm2709-rpi-2-b.dtb the same raspbian image
>> can fully boot to the login console.
> 
> Argh this is because I split this of a bigger series and didn't included
> changes related to the GPU 'properties', sorry.

Actually it was missing SYS_timer changes, now rebased/posted:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg742694.html

> 
>>
>> Regards,
>> Niek
>>
>>
>>
>> On Mon, Feb 17, 2020 at 12:51 PM Philippe Mathieu-Daudé
>> <f4bug@amsat.org <mailto:f4bug@amsat.org>> wrote:
>>
>>        $ qemu-system-arm -M raspi1b -serial stdio \
>>            -kernel raspberrypi/firmware/boot/kernel.img \
>>            -dtb raspberrypi/firmware/boot/bcm2708-rpi-b.dtb \
>>            -append 'printk.time=0 earlycon=pl011,0x20201000
>> console=ttyAMA0'
>>        [    0.000000] Booting Linux on physical CPU 0x0
>>        [    0.000000] Linux version 4.19.69+ (dom@buildbot) (gcc version
>>     4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1261 Tue Sep
>>     3 20:21:01 BST 2019
>>        [    0.000000] CPU: ARMv6-compatible processor [410fb767]
>>     revision 7 (ARMv7), cr=00c5387d
>>        [    0.000000] CPU: VIPT aliasing data cache, unknown instruction
>>     cache
>>        [    0.000000] OF: fdt: Machine model: Raspberry Pi Model B
>>        [    0.000000] earlycon: pl11 at MMIO 0x20201000 (options '')
>>        [    0.000000] bootconsole [pl11] enabled
>>        [    0.000000] Memory policy: Data cache writeback
>>        [    0.000000] cma: Reserved 8 MiB at 0x1b800000
>>        [    0.000000] random: get_random_bytes called from
>>     start_kernel+0x8c/0x49c with crng_init=0
>>        [    0.000000] Built 1 zonelists, mobility grouping on.  Total
>>     pages: 113680
>>        [    0.000000] Kernel command line: printk.time=0
>>     earlycon=pl011,0x20201000 console=ttyAMA0
>>        Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>        Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>        Memory: 434380K/458752K available (6971K kernel code, 635K
>>     rwdata, 2080K rodata, 464K init, 797K bss, 16180K reserved, 8192K
>>     cma-reserved)
>>        ...
>>
>>     Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org
>>     <mailto:f4bug@amsat.org>>
>>     ---
>>       hw/arm/raspi.c | 13 +++++++++++++
>>       1 file changed, 13 insertions(+)
>>
>>     diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
>>     index 3537a329ac..2d9f4e3085 100644
>>     --- a/hw/arm/raspi.c
>>     +++ b/hw/arm/raspi.c
>>     @@ -324,6 +324,15 @@ static void
>>     raspi_machine_class_common_init(MachineClass *mc,
>>           mc->default_ram_size = board_ram_size(board_rev);
>>       };
>>
>>     +static void raspi1b_machine_class_init(ObjectClass *oc, void *data)
>>     +{
>>     +    MachineClass *mc = MACHINE_CLASS(oc);
>>     +    RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
>>     +
>>     +    rmc->board_rev = 0x900032;
>>     +    raspi_machine_class_common_init(mc, rmc->board_rev);
>>     +};
>>     +
>>       static void raspi2b_machine_class_init(ObjectClass *oc, void *data)
>>       {
>>           MachineClass *mc = MACHINE_CLASS(oc);
>>     @@ -348,6 +357,10 @@ static void
>>     raspi3b_machine_class_init(ObjectClass *oc, void *data)
>>
>>       static const TypeInfo raspi_machine_types[] = {
>>           {
>>     +        .name           = MACHINE_TYPE_NAME("raspi1b"),
>>     +        .parent         = TYPE_RASPI_MACHINE,
>>     +        .class_init     = raspi1b_machine_class_init,
>>     +    }, {
>>               .name           = MACHINE_TYPE_NAME("raspi2b"),
>>               .parent         = TYPE_RASPI_MACHINE,
>>               .class_init     = raspi2b_machine_class_init,
>>     --     2.21.1
>>
>>
>>
>>
>> -- 
>> Niek Linnenbank
>>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]