qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3 11/11] hw/semihosting: Make the feature depend of TCG, an


From: Philippe Mathieu-Daudé
Subject: Re: [PATCH v3 11/11] hw/semihosting: Make the feature depend of TCG, and allow to disable it
Date: Fri, 22 May 2020 17:12:49 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0

On 5/21/20 9:59 PM, Philippe Mathieu-Daudé wrote:
> The semihosting feature is only meaningful when using TCG.
> 
> Do not enable it by default, and let the few targets requiring
> it to manually select it.
> The targets restricted to TCG that previously selected it
> (see commit 16932bb761e52c2 'introduce CONFIG_SEMIHOSTING')
> are left unmodified; however the selection is moved to the
> target Kconfig.
> 
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> ---
> v3: Fixed odd hidden \xC2 UTF-8 chars:
> 
> Traceback (most recent call last):
>   File "qemu/scripts/minikconf.py", line 355, in parse_file
>     self.src = fp.read()
> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 21: 
> ordinal not in range(128)
> ---
>  default-configs/arm-softmmu.mak         | 1 -
>  default-configs/lm32-softmmu.mak        | 2 --
>  default-configs/m68k-softmmu.mak        | 2 --
>  default-configs/mips-softmmu-common.mak | 3 ---
>  default-configs/nios2-softmmu.mak       | 2 --
>  default-configs/xtensa-softmmu.mak      | 2 --
>  hw/semihosting/Kconfig                  | 4 +++-
>  target/arm/Kconfig                      | 2 ++
>  target/lm32/Kconfig                     | 2 ++
>  target/m68k/Kconfig                     | 2 ++
>  target/mips/Kconfig                     | 2 ++
>  target/nios2/Kconfig                    | 2 ++
>  target/riscv/Kconfig                    | 2 ++
>  target/xtensa/Kconfig                   | 2 ++
>  14 files changed, 17 insertions(+), 13 deletions(-)
>  create mode 100644 target/arm/Kconfig
>  create mode 100644 target/lm32/Kconfig
>  create mode 100644 target/m68k/Kconfig
>  create mode 100644 target/mips/Kconfig
>  create mode 100644 target/nios2/Kconfig
>  create mode 100644 target/riscv/Kconfig
>  create mode 100644 target/xtensa/Kconfig
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 8fc09a4a51..f6044f1121 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -40,6 +40,5 @@ CONFIG_MICROBIT=y
>  CONFIG_FSL_IMX25=y
>  CONFIG_FSL_IMX7=y
>  CONFIG_FSL_IMX6UL=y
> -CONFIG_SEMIHOSTING=y
>  CONFIG_ALLWINNER_H3=y
>  CONFIG_ACPI_APEI=y
> diff --git a/default-configs/lm32-softmmu.mak 
> b/default-configs/lm32-softmmu.mak
> index 115b3e34c9..6d259665d6 100644
> --- a/default-configs/lm32-softmmu.mak
> +++ b/default-configs/lm32-softmmu.mak
> @@ -4,8 +4,6 @@
>  #
>  #CONFIG_MILKYMIST_TMU2=n        # disabling it actually causes compile-time 
> failures
>  
> -CONFIG_SEMIHOSTING=y
> -
>  # Boards:
>  #
>  CONFIG_LM32=y
> diff --git a/default-configs/m68k-softmmu.mak 
> b/default-configs/m68k-softmmu.mak
> index 6629fd2aa3..4fef4bd731 100644
> --- a/default-configs/m68k-softmmu.mak
> +++ b/default-configs/m68k-softmmu.mak
> @@ -1,7 +1,5 @@
>  # Default configuration for m68k-softmmu
>  
> -CONFIG_SEMIHOSTING=y
> -
>  # Boards:
>  #
>  CONFIG_AN5206=y
> diff --git a/default-configs/mips-softmmu-common.mak 
> b/default-configs/mips-softmmu-common.mak
> index da29c6c0b2..6c0904b200 100644
> --- a/default-configs/mips-softmmu-common.mak
> +++ b/default-configs/mips-softmmu-common.mak
> @@ -1,8 +1,5 @@
>  # Common mips*-softmmu CONFIG defines
>  
> -# CONFIG_SEMIHOSTING is always required on this architecture
> -CONFIG_SEMIHOSTING=y
> -
>  CONFIG_ISA_BUS=y
>  CONFIG_PCI=y
>  CONFIG_PCI_DEVICES=y
> diff --git a/default-configs/nios2-softmmu.mak 
> b/default-configs/nios2-softmmu.mak
> index 1bc4082ea9..e130d024e6 100644
> --- a/default-configs/nios2-softmmu.mak
> +++ b/default-configs/nios2-softmmu.mak
> @@ -1,7 +1,5 @@
>  # Default configuration for nios2-softmmu
>  
> -CONFIG_SEMIHOSTING=y
> -
>  # Boards:
>  #
>  CONFIG_NIOS2_10M50=y
> diff --git a/default-configs/xtensa-softmmu.mak 
> b/default-configs/xtensa-softmmu.mak
> index 4fe1bf00c9..49e4c9da88 100644
> --- a/default-configs/xtensa-softmmu.mak
> +++ b/default-configs/xtensa-softmmu.mak
> @@ -1,7 +1,5 @@
>  # Default configuration for Xtensa
>  
> -CONFIG_SEMIHOSTING=y
> -
>  # Boards:
>  #
>  CONFIG_XTENSA_SIM=y
> diff --git a/hw/semihosting/Kconfig b/hw/semihosting/Kconfig
> index efe0a30734..30befcdd21 100644
> --- a/hw/semihosting/Kconfig
> +++ b/hw/semihosting/Kconfig
> @@ -1,3 +1,5 @@
>  
> +# default is 'n'
>  config SEMIHOSTING
> -       bool
> +    bool
> +    depends on TCG
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> new file mode 100644
> index 0000000000..035592dd86
> --- /dev/null
> +++ b/target/arm/Kconfig
> @@ -0,0 +1,2 @@
> +config SEMIHOSTING
> +    default y if TCG

This patch is incorrect, because previously the feature was selected for
system-mode only, and now it is selected in user-mode too.

[...]




reply via email to

[Prev in Thread] Current Thread [Next in Thread]