[PATCH v8 8/9] hw/arm/xilinx_zynq: connect uart clocks to slcr

[Damien Hedde]

Add the connection between the slcr's output clocks and the uarts inputs.

Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz
(the default frequency). This clock is used to feed the slcr's input
clock.

Signed-off-by: Damien Hedde <address@hidden>

---
v7
 + update ClockIn/ClockOut types
 + simplify the ps_clk frequency init
---
 hw/arm/xilinx_zynq.c | 57 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 49 insertions(+), 8 deletions(-)

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 3a0fa5b23f..261a1690a8 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -34,6 +34,15 @@
 #include "hw/char/cadence_uart.h"
 #include "hw/net/cadence_gem.h"
 #include "hw/cpu/a9mpcore.h"
+#include "hw/qdev-clock.h"
+#include "sysemu/reset.h"
+
+#define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9")
+#define ZYNQ_MACHINE(obj) \
+    OBJECT_CHECK(ZynqMachineState, (obj), TYPE_ZYNQ_MACHINE)
+
+/* board base frequency: 33.333333 MHz */
+#define PS_CLK_FREQUENCY (100 * 1000 * 1000 / 3)
 
 #define NUM_SPI_FLASHES 4
 #define NUM_QSPI_FLASHES 2
@@ -74,6 +83,11 @@ static const int dma_irqs[8] = {
     0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \
     0xe5801000 + (addr)
 
+typedef struct ZynqMachineState {
+    MachineState parent;
+    Clock *ps_clk;
+} ZynqMachineState;
+
 static void zynq_write_board_setup(ARMCPU *cpu,
                                    const struct arm_boot_info *info)
 {
@@ -158,12 +172,13 @@ static inline void zynq_init_spi_flashes(uint32_t 
base_addr, qemu_irq irq,
 
 static void zynq_init(MachineState *machine)
 {
+    ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine);
     ram_addr_t ram_size = machine->ram_size;
     ARMCPU *cpu;
     MemoryRegion *address_space_mem = get_system_memory();
     MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
     MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
-    DeviceState *dev;
+    DeviceState *dev, *slcr;
     SysBusDevice *busdev;
     qemu_irq pic[64];
     int n;
@@ -208,9 +223,18 @@ static void zynq_init(MachineState *machine)
                           1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
                           0);
 
-    dev = qdev_create(NULL, "xilinx,zynq_slcr");
-    qdev_init_nofail(dev);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
+    /* Create slcr, keep a pointer to connect clocks */
+    slcr = qdev_create(NULL, "xilinx,zynq_slcr");
+    qdev_init_nofail(slcr);
+    sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000);
+
+    /* Create the main clock source, and feed slcr with it */
+    zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK));
+    object_property_add_child(OBJECT(zynq_machine), "ps_clk",
+                              OBJECT(zynq_machine->ps_clk), &error_abort);
+    object_unref(OBJECT(zynq_machine->ps_clk));
+    clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY);
+    qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk);
 
     dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
     qdev_prop_set_uint32(dev, "num-cpu", 1);
@@ -231,8 +255,12 @@ static void zynq_init(MachineState *machine)
     sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
     sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
 
-    cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
-    cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
+    dev = cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
+    qdev_connect_clock_in(dev, "refclk",
+                          qdev_get_clock_out(slcr, "uart0_ref_clk"));
+    dev = cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
+    qdev_connect_clock_in(dev, "refclk",
+                          qdev_get_clock_out(slcr, "uart1_ref_clk"));
 
     sysbus_create_varargs("cadence_ttc", 0xF8001000,
             pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
@@ -310,8 +338,9 @@ static void zynq_init(MachineState *machine)
     arm_load_kernel(ARM_CPU(first_cpu), machine, &zynq_binfo);
 }
 
-static void zynq_machine_init(MachineClass *mc)
+static void zynq_machine_class_init(ObjectClass *oc, void *data)
 {
+    MachineClass *mc = MACHINE_CLASS(oc);
     mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
     mc->init = zynq_init;
     mc->max_cpus = 1;
@@ -320,4 +349,16 @@ static void zynq_machine_init(MachineClass *mc)
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
 }
 
-DEFINE_MACHINE("xilinx-zynq-a9", zynq_machine_init)
+static const TypeInfo zynq_machine_type = {
+    .name = TYPE_ZYNQ_MACHINE,
+    .parent = TYPE_MACHINE,
+    .class_init = zynq_machine_class_init,
+    .instance_size = sizeof(ZynqMachineState),
+};
+
+static void zynq_machine_register_types(void)
+{
+    type_register_static(&zynq_machine_type);
+}
+
+type_init(zynq_machine_register_types)
-- 
2.25.1