[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v13 07/10] virtio-iommu-pci: Add virtio iommu pci support
From: |
Auger Eric |
Subject: |
Re: [PATCH v13 07/10] virtio-iommu-pci: Add virtio iommu pci support |
Date: |
Mon, 3 Feb 2020 14:38:22 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 |
Hi Michael,
On 2/3/20 2:28 PM, Michael S. Tsirkin wrote:
> On Mon, Feb 03, 2020 at 02:20:55PM +0100, Auger Eric wrote:
>> Hi Michael,
>>
>> On 2/3/20 2:03 PM, Michael S. Tsirkin wrote:
>>> On Sat, Jan 25, 2020 at 06:19:52PM +0100, Eric Auger wrote:
>>>> This patch adds virtio-iommu-pci, which is the pci proxy for
>>>> the virtio-iommu device.
>>>>
>>>> Signed-off-by: Eric Auger <address@hidden>
>>>> Reviewed-by: Jean-Philippe Brucker <address@hidden>
>>>
>>> I commented on v11 of this patch:
>>>>> Could you send a smaller patchset without pci/acpi bits for now?
>>> And you answered:
>>>> Yes I am about to send v12.
>>>
>>> I guess this patch is here by mistake then?
>>>
>>> I think PCI devices should always have config space so guests are
>>> not tempted to find work-arounds. Right?
>> No it is not here by mistake. I removed everything related non DT
>> integration as we discussed.
>>
>> DT support is fully upstream even for virtio-iommu-pci.
>> https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/virtio/iommu.txt
>>
>> So what's wrong implementing that at the moment. As we discussed we
>> would use the PCIe config space integration for non DT.
>>
>> If I use the MMIO based device, I am forced to lock an MMIO region for
>> it in the machvirt memory map:
>> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/virtio/mmio.txt
>>
>> I guess Peter (Maydell) will not be happy with this situation either.
>>
>> Thanks
>>
>> Eric
>
> I see. Can't we limit this to DT platforms for now then?
That is the case. virtio-iommu does not work with ACPI.
For non DT the plan is to use what you suggested, ie. pass the binding
info through the PCIe config space.
In that prospect I am waiting for Jean-Philippe's [RFC 00/13]
virtio-iommu on non-devicetree platforms respin
(https://lore.kernel.org/linux-iommu/address@hidden/T/)
and especially patches 12 and 13 of the series, ie. binding info through
the PCIe config space.
Thanks
Eric
>
>
>
>>>
>>>> ---
>>>>
>>>> v11 -> v12:
>>>> - added Jean's R-b
>>>> - remove the array of intervals. Will be introduced later?
>>>>
>>>> v10 -> v11:
>>>> - add the reserved_regions array property
>>>>
>>>> v9 -> v10:
>>>> - include "hw/qdev-properties.h" header
>>>>
>>>> v8 -> v9:
>>>> - add the msi-bypass property
>>>> - create virtio-iommu-pci.c
>>>> ---
>>>> hw/virtio/Makefile.objs | 1 +
>>>> hw/virtio/virtio-iommu-pci.c | 88 ++++++++++++++++++++++++++++++++
>>>> include/hw/pci/pci.h | 1 +
>>>> include/hw/virtio/virtio-iommu.h | 1 +
>>>> qdev-monitor.c | 1 +
>>>> 5 files changed, 92 insertions(+)
>>>> create mode 100644 hw/virtio/virtio-iommu-pci.c
>>>>
>>>> diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
>>>> index 2fd9da7410..4e4d39a0a4 100644
>>>> --- a/hw/virtio/Makefile.objs
>>>> +++ b/hw/virtio/Makefile.objs
>>>> @@ -29,6 +29,7 @@ obj-$(CONFIG_VIRTIO_INPUT_HOST) +=
>>>> virtio-input-host-pci.o
>>>> obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-pci.o
>>>> obj-$(CONFIG_VIRTIO_RNG) += virtio-rng-pci.o
>>>> obj-$(CONFIG_VIRTIO_BALLOON) += virtio-balloon-pci.o
>>>> +obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu-pci.o
>>>> obj-$(CONFIG_VIRTIO_9P) += virtio-9p-pci.o
>>>> obj-$(CONFIG_VIRTIO_SCSI) += virtio-scsi-pci.o
>>>> obj-$(CONFIG_VIRTIO_BLK) += virtio-blk-pci.o
>>>> diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c
>>>> new file mode 100644
>>>> index 0000000000..4cfae1f9df
>>>> --- /dev/null
>>>> +++ b/hw/virtio/virtio-iommu-pci.c
>>>> @@ -0,0 +1,88 @@
>>>> +/*
>>>> + * Virtio IOMMU PCI Bindings
>>>> + *
>>>> + * Copyright (c) 2019 Red Hat, Inc.
>>>> + * Written by Eric Auger
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 or
>>>> + * (at your option) any later version.
>>>> + */
>>>> +
>>>> +#include "qemu/osdep.h"
>>>> +
>>>> +#include "virtio-pci.h"
>>>> +#include "hw/virtio/virtio-iommu.h"
>>>> +#include "hw/qdev-properties.h"
>>>> +
>>>> +typedef struct VirtIOIOMMUPCI VirtIOIOMMUPCI;
>>>> +
>>>> +/*
>>>> + * virtio-iommu-pci: This extends VirtioPCIProxy.
>>>> + *
>>>> + */
>>>> +#define VIRTIO_IOMMU_PCI(obj) \
>>>> + OBJECT_CHECK(VirtIOIOMMUPCI, (obj), TYPE_VIRTIO_IOMMU_PCI)
>>>> +
>>>> +struct VirtIOIOMMUPCI {
>>>> + VirtIOPCIProxy parent_obj;
>>>> + VirtIOIOMMU vdev;
>>>> +};
>>>> +
>>>> +static Property virtio_iommu_pci_properties[] = {
>>>> + DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0),
>>>> + DEFINE_PROP_END_OF_LIST(),
>>>> +};
>>>> +
>>>> +static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error
>>>> **errp)
>>>> +{
>>>> + VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev);
>>>> + DeviceState *vdev = DEVICE(&dev->vdev);
>>>> +
>>>> + qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
>>>> + object_property_set_link(OBJECT(dev),
>>>> + OBJECT(pci_get_bus(&vpci_dev->pci_dev)),
>>>> + "primary-bus", errp);
>>>> + object_property_set_bool(OBJECT(vdev), true, "realized", errp);
>>>> +}
>>>> +
>>>> +static void virtio_iommu_pci_class_init(ObjectClass *klass, void *data)
>>>> +{
>>>> + DeviceClass *dc = DEVICE_CLASS(klass);
>>>> + VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
>>>> + PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
>>>> + k->realize = virtio_iommu_pci_realize;
>>>> + set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>>>> + dc->props = virtio_iommu_pci_properties;
>>>> + pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
>>>> + pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_IOMMU;
>>>> + pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
>>>> + pcidev_k->class_id = PCI_CLASS_OTHERS;
>>>> +}
>>>> +
>>>> +static void virtio_iommu_pci_instance_init(Object *obj)
>>>> +{
>>>> + VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(obj);
>>>> +
>>>> + virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
>>>> + TYPE_VIRTIO_IOMMU);
>>>> +}
>>>> +
>>>> +static const VirtioPCIDeviceTypeInfo virtio_iommu_pci_info = {
>>>> + .base_name = TYPE_VIRTIO_IOMMU_PCI,
>>>> + .generic_name = "virtio-iommu-pci",
>>>> + .transitional_name = "virtio-iommu-pci-transitional",
>>>> + .non_transitional_name = "virtio-iommu-pci-non-transitional",
>>>> + .instance_size = sizeof(VirtIOIOMMUPCI),
>>>> + .instance_init = virtio_iommu_pci_instance_init,
>>>> + .class_init = virtio_iommu_pci_class_init,
>>>> +};
>>>> +
>>>> +static void virtio_iommu_pci_register(void)
>>>> +{
>>>> + virtio_pci_types_register(&virtio_iommu_pci_info);
>>>> +}
>>>> +
>>>> +type_init(virtio_iommu_pci_register)
>>>> +
>>>> +
>>>> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
>>>> index 2acd8321af..cfedf5a995 100644
>>>> --- a/include/hw/pci/pci.h
>>>> +++ b/include/hw/pci/pci.h
>>>> @@ -86,6 +86,7 @@ extern bool pci_available;
>>>> #define PCI_DEVICE_ID_VIRTIO_9P 0x1009
>>>> #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012
>>>> #define PCI_DEVICE_ID_VIRTIO_PMEM 0x1013
>>>> +#define PCI_DEVICE_ID_VIRTIO_IOMMU 0x1014
>>>>
>>>> #define PCI_VENDOR_ID_REDHAT 0x1b36
>>>> #define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
>>>> diff --git a/include/hw/virtio/virtio-iommu.h
>>>> b/include/hw/virtio/virtio-iommu.h
>>>> index 2a2c2ecf83..f39aa0fbb4 100644
>>>> --- a/include/hw/virtio/virtio-iommu.h
>>>> +++ b/include/hw/virtio/virtio-iommu.h
>>>> @@ -25,6 +25,7 @@
>>>> #include "hw/pci/pci.h"
>>>>
>>>> #define TYPE_VIRTIO_IOMMU "virtio-iommu-device"
>>>> +#define TYPE_VIRTIO_IOMMU_PCI "virtio-iommu-device-base"
>>>> #define VIRTIO_IOMMU(obj) \
>>>> OBJECT_CHECK(VirtIOIOMMU, (obj), TYPE_VIRTIO_IOMMU)
>>>>
>>>> diff --git a/qdev-monitor.c b/qdev-monitor.c
>>>> index 3465a1e2d0..97f4022b51 100644
>>>> --- a/qdev-monitor.c
>>>> +++ b/qdev-monitor.c
>>>> @@ -66,6 +66,7 @@ static const QDevAlias qdev_alias_table[] = {
>>>> { "virtio-input-host-ccw", "virtio-input-host", QEMU_ARCH_S390X },
>>>> { "virtio-input-host-pci", "virtio-input-host",
>>>> QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
>>>> + { "virtio-iommu-pci", "virtio-iommu", QEMU_ARCH_ALL &
>>>> ~QEMU_ARCH_S390X },
>>>> { "virtio-keyboard-ccw", "virtio-keyboard", QEMU_ARCH_S390X },
>>>> { "virtio-keyboard-pci", "virtio-keyboard",
>>>> QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
>>>> --
>>>> 2.20.1
>>>
>>>
>