qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [kvm-unit-tests PATCH v2 13/16] arm/arm64: ITS: INT functional tests


From: Auger Eric
Subject: Re: [kvm-unit-tests PATCH v2 13/16] arm/arm64: ITS: INT functional tests
Date: Wed, 15 Jan 2020 18:11:23 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0

Hi Drew,

On 1/13/20 7:17 PM, Andrew Jones wrote:
> On Fri, Jan 10, 2020 at 03:54:09PM +0100, Eric Auger wrote:
>> Triggers LPIs through the INT command.
>>
>> the test checks the LPI hits the right CPU and triggers
>> the right LPI intid, ie. the translation is correct.
>>
>> Updates to the config table also are tested, along with inv
>> and invall commands.
>>
>> Signed-off-by: Eric Auger <address@hidden>
>> ---
>>  arm/gic.c                | 174 +++++++++++++++++++++++++++++++++++++++
>>  arm/unittests.cfg        |   6 ++
>>  lib/arm/asm/gic-v3-its.h |  14 ++++
>>  3 files changed, 194 insertions(+)
>>
>> diff --git a/arm/gic.c b/arm/gic.c
>> index 3597ac3..7f701a1 100644
>> --- a/arm/gic.c
>> +++ b/arm/gic.c
>> @@ -34,6 +34,7 @@ static struct gic *gic;
>>  static int acked[NR_CPUS], spurious[NR_CPUS];
>>  static int bad_sender[NR_CPUS], bad_irq[NR_CPUS];
>>  static cpumask_t ready;
>> +static struct its_stats lpi_stats;
>>  
>>  static void nr_cpu_check(int nr)
>>  {
>> @@ -158,6 +159,54 @@ static void ipi_handler(struct pt_regs *regs __unused)
>>      }
>>  }
>>  
>> +static void lpi_handler(struct pt_regs *regs __unused)
>> +{
>> +    u32 irqstat = gic_read_iar();
>> +    int irqnr = gic_iar_irqnr(irqstat);
>> +
>> +    gic_write_eoir(irqstat);
>> +    if (irqnr < 8192)
>> +            report(false, "Unexpected non LPI interrupt received");
>> +    smp_rmb(); /* pairs with wmb in lpi_stats_expect */
>> +    lpi_stats.observed.cpu_id = smp_processor_id();
>> +    lpi_stats.observed.lpi_id = irqnr;
>> +    smp_wmb(); /* pairs with rmb in check_lpi_stats */
>> +}
>> +
>> +static void lpi_stats_expect(int exp_cpu_id, int exp_lpi_id)
>> +{
>> +    lpi_stats.expected.cpu_id = exp_cpu_id;
>> +    lpi_stats.expected.lpi_id = exp_lpi_id;
>> +    lpi_stats.observed.cpu_id = -1;
>> +    lpi_stats.observed.lpi_id = -1;
>> +    smp_wmb(); /* pairs with rmb in handler */
>> +}
>> +
>> +static void check_lpi_stats(void)
>> +{
>> +    mdelay(100);
>> +    smp_rmb(); /* pairs with wmb in lpi_handler */
>> +    if ((lpi_stats.observed.cpu_id != lpi_stats.expected.cpu_id) ||
>> +        (lpi_stats.observed.lpi_id != lpi_stats.expected.lpi_id)) {
>> +            if (lpi_stats.observed.cpu_id == -1 &&
>> +                lpi_stats.observed.lpi_id == -1) {
>> +                    report(false,
>> +                           "No LPI received whereas (cpuid=%d, intid=%d) "
>> +                           "was expected", lpi_stats.expected.cpu_id,
>> +                           lpi_stats.expected.lpi_id);
>> +            } else {
>> +                    report(false, "Unexpected LPI (cpuid=%d, intid=%d)",
>> +                           lpi_stats.observed.cpu_id,
>> +                           lpi_stats.observed.lpi_id);
>> +            }
>> +    } else if (lpi_stats.expected.lpi_id != -1) {
>> +            report(true, "LPI %d on CPU %d", lpi_stats.observed.lpi_id,
>> +                   lpi_stats.observed.cpu_id);
>> +    } else {
>> +            report(true, "no LPI received, as expected");
>> +    }
>> +}
>> +
>>  static void gicv2_ipi_send_self(void)
>>  {
>>      writel(2 << 24 | IPI_IRQ, gicv2_dist_base() + GICD_SGIR);
>> @@ -241,6 +290,14 @@ static void ipi_test(void *data __unused)
>>              ipi_recv();
>>  }
>>  
>> +static void secondary_lpi_test(void)
>> +{
>> +    setup_irq(lpi_handler);
>> +    cpumask_set_cpu(smp_processor_id(), &ready);
>> +    while (1)
>> +            wfi();
>> +}
>> +
>>  static struct gic gicv2 = {
>>      .ipi = {
>>              .send_self = gicv2_ipi_send_self,
>> @@ -551,6 +608,120 @@ static void test_its_baser(void)
>>      report_info("collection baser entry_size = 0x%x", coll_baser->esz);
>>  }
>>  
>> +static int its_prerequisites(int nb_cpus)
>> +{
>> +    int cpu;
>> +
>> +    if (!gicv3_its_base()) {
>> +            report_skip("No ITS, skip ...");
>> +            return -1;
>> +    }
>> +
>> +    if (nr_cpus < 4) {
>> +            report_skip("Test requires at least %d vcpus", nb_cpus);
>> +            return -1;
> 
> We have nr_cpu_check() in arm/gic.c that does a report_abort for this
> case. Is there a reason to do report_skip instead of report_abort?
Why should we mandate 4 vcpus?
> 
> Also do you plan to return more than 0 - success, -1 - failure? If not,
> then this could be a bool function.
indeed.
> 
>> +    }
>> +
>> +    stats_reset();
>> +
>> +    setup_irq(lpi_handler);
>> +
>> +    for_each_present_cpu(cpu) {
>> +            if (cpu == 0)
>> +                    continue;
>> +            smp_boot_secondary(cpu, secondary_lpi_test);
>> +    }
>> +    wait_on_ready();
>> +
>> +    its_enable_defaults();
>> +
>> +    lpi_stats_expect(-1, -1);
>> +    check_lpi_stats();
>> +
>> +    return 0;
>> +}
>> +
>> +static void test_its_trigger(void)
>> +{
>> +    struct its_collection *col3, *col2;
>> +    struct its_device *dev2, *dev7;
>> +
>> +    if (its_prerequisites(4))
>> +            return;
>> +
>> +    dev2 = its_create_device(2 /* dev id */, 8 /* nb_ites */);
>> +    dev7 = its_create_device(7 /* dev id */, 8 /* nb_ites */);
>> +
>> +    col3 = its_create_collection(3 /* col id */, 3/* target PE */);
>> +    col2 = its_create_collection(2 /* col id */, 2/* target PE */);
>> +
>> +    set_lpi_config(8195, LPI_PROP_DEFAULT);
>> +    set_lpi_config(8196, LPI_PROP_DEFAULT);
>> +
>> +    its_send_invall(col2);
>> +    its_send_invall(col3);
>> +
>> +    report_prefix_push("int");
>> +
>> +    its_send_mapd(dev2, true);
>> +    its_send_mapd(dev7, true);
>> +
>> +    its_send_mapc(col3, true);
>> +    its_send_mapc(col2, true);
>> +
>> +    its_send_mapti(dev2, 8195 /* lpi id */,
>> +                   20 /* event id */, col3);
>> +    its_send_mapti(dev7, 8196 /* lpi id */,
>> +                   255 /* event id */, col2);
>> +
>> +    lpi_stats_expect(3, 8195);
>> +    its_send_int(dev2, 20);
>> +    check_lpi_stats();
>> +
>> +    lpi_stats_expect(2, 8196);
>> +    its_send_int(dev7, 255);
>> +    check_lpi_stats();
>> +
>> +    report_prefix_pop();
>> +
>> +    report_prefix_push("inv/invall");
>> +
>> +    /* disable 8195 */
>> +    set_lpi_config(8195, LPI_PROP_DEFAULT & ~0x1);
>> +    its_send_inv(dev2, 20);
>> +
>> +    lpi_stats_expect(-1, -1);
>> +    its_send_int(dev2, 20);
>> +    check_lpi_stats();
>> +
>> +    set_lpi_config(8195, LPI_PROP_DEFAULT);
>> +    /* willingly forget the INVALL*/
>> +    lpi_stats_expect(-1, -1);
>> +    its_send_int(dev2, 20);
>> +    check_lpi_stats();
>> +
>> +    its_send_invall(col3);
>> +    lpi_stats_expect(3, 8195);
>> +    its_send_int(dev2, 20);
>> +    check_lpi_stats();
>> +
>> +    report_prefix_pop();
>> +
>> +    report_prefix_push("mapd valid=false");
>> +    its_send_mapd(dev2, false);
>> +    lpi_stats_expect(-1, -1);
>> +    its_send_int(dev2, 20);
>> +    check_lpi_stats();
>> +    report_prefix_pop();
>> +
>> +    report_prefix_push("mapc valid=false");
>> +    its_send_mapc(col2, false);
>> +    lpi_stats_expect(-1, -1);
>> +    its_send_int(dev7, 255);
>> +    check_lpi_stats();
> 
> Missing prefix pop here
OK
> 
>> +}
>> +
>> +
> 
> Extra blank line
> 
>>  int main(int argc, char **argv)
>>  {
>>      if (!gic_init()) {
>> @@ -581,6 +752,9 @@ int main(int argc, char **argv)
>>      } else if (strcmp(argv[1], "mmio") == 0) {
>>              report_prefix_push(argv[1]);
>>              gic_test_mmio();
>> +    } else if (!strcmp(argv[1], "its-trigger")) {
>> +            report_prefix_push(argv[1]);
>> +            test_its_trigger();
>>              report_prefix_pop();
> 
> You stole the report_prefix_pop from the mmio tests above.
OK
> 
>>      } else if (strcmp(argv[1], "its-introspection") == 0) {
>>              report_prefix_push(argv[1]);
>> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
>> index 2234a0f..80a1d27 100644
>> --- a/arm/unittests.cfg
>> +++ b/arm/unittests.cfg
>> @@ -134,6 +134,12 @@ smp = $MAX_SMP
>>  extra_params = -machine gic-version=3 -append 'its-baser'
>>  groups = its
>>  
>> +[its-trigger]
>> +file = gic.flat
>> +smp = $MAX_SMP
>> +extra_params = -machine gic-version=3 -append 'its-trigger'
>> +groups = its
>> +
>>  # Test PSCI emulation
>>  [psci]
>>  file = psci.flat
>> diff --git a/lib/arm/asm/gic-v3-its.h b/lib/arm/asm/gic-v3-its.h
>> index 463174f..7d6f8fd 100644
>> --- a/lib/arm/asm/gic-v3-its.h
>> +++ b/lib/arm/asm/gic-v3-its.h
>> @@ -123,6 +123,16 @@ struct its_data {
>>      u32 nr_collections;     /* Allocated Collections */
>>  };
>>  
>> +struct its_event {
>> +    int cpu_id;
>> +    int lpi_id;
>> +};
>> +
>> +struct its_stats {
>> +    struct its_event expected;
>> +    struct its_event observed;
>> +};
> 
> These structures belong in arm/gic.c as they are unit test structions and
> driver structures.
OK
> 
>> +
>>  extern struct its_data its_data;
>>  
>>  #define gicv3_its_base()            (its_data.base)
>> @@ -139,6 +149,10 @@ extern void gicv3_rdist_ctrl_lpi(u32 redist, bool set);
>>  extern void its_enable_defaults(void);
>>  extern struct its_device *its_create_device(u32 dev_id, int nr_ites);
>>  extern struct its_collection *its_create_collection(u32 col_id, u32 
>> target_pe);
>> +extern struct its_collection *its_create_collection(u32 col_id, u32 target);
> 
> Extra definition of its_create_collection?
> 
>> +
>> +extern void set_lpi_config(int n, u8 val);
> 
> Please rename: lpi_set_config
> 
>> +extern u8 get_lpi_config(int n);
> 
> get_lpi_config doesn't seem to exist.
> 
>>  
>>  extern void its_send_mapd(struct its_device *dev, int valid);
>>  extern void its_send_mapc(struct its_collection *col, int valid);
>> -- 
>> 2.20.1
>>
> 
> Thanks,
> drew 
> 
Thanks

Eric




reply via email to

[Prev in Thread] Current Thread [Next in Thread]