|
From: | Waseem ALKurdi |
Subject: | QEMU not booting U-Boot on almost all i.MX ARM boards |
Date: | Thu, 3 Oct 2019 21:19:08 +0000 |
Dear all,
I'm trying to get mainline U-Boot to boot on mainline QEMU 4.1.0 for the 'sabrelite' board, using the configuration 'mx6qsabrelite_defconfig'.
It's not booting at all. Actually, not a single U-Boot build for an i.MX board would boot, with the exception of 'imx25-pdk'.
I'm compiling U-Boot by un-tarring the source tarball and running the following commands:
$ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm clean
$ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mrproper
$ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mx6qsabrelite_defconfig
then after the build finishes:
$ qemu-system-arm -M sabrelite -m 512M -kernel ~/Downloads/u-boot-2019.10-rc3/u-boot.imx -monitor stdio
And other variations on this command as well.
No amount of kernel commandline options or anything would make it boot.
I have asked the same question on the U-Boot developers' mailing list, but they directed me here, as it seems to be an issue with QEMU's implementation of the 'sabrelite' board.
What should I do?
Best regards,
|
[Prev in Thread] | Current Thread | [Next in Thread] |