[PATCH 11/19] hw/arm/bcm2835_peripherals: Use the SYS_timer

[Philippe Mathieu-Daudé]

Connect the recently added SYS_timer.
Now U-Boot does not hang anymore polling a free running counter
stuck at 0.
This timer is also used by the Linux kernel thermal subsystem.

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
 hw/arm/bcm2835_peripherals.c         | 21 ++++++++++++++++++++-
 include/hw/arm/bcm2835_peripherals.h |  3 ++-
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 70bf927a02..965f4c1f3d 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -58,6 +58,10 @@ static void bcm2835_peripherals_init(Object *obj)
     /* Interrupt Controller */
     sysbus_init_child_obj(obj, "ic", &s->ic, sizeof(s->ic), TYPE_BCM2835_IC);
 
+    /* SYS Timer */
+    sysbus_init_child_obj(obj, "systimer", &s->systmr, sizeof(s->systmr),
+                          TYPE_BCM2835_SYSTIMER);
+
     /* UART0 */
     sysbus_init_child_obj(obj, "uart0", &s->uart0, sizeof(s->uart0),
                           TYPE_PL011);
@@ -171,6 +175,22 @@ static void bcm2835_peripherals_realize(DeviceState *dev, 
Error **errp)
                 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ic), 0));
     sysbus_pass_irq(SYS_BUS_DEVICE(s), SYS_BUS_DEVICE(&s->ic));
 
+    /* Sys Timer */
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    object_property_set_bool(OBJECT(&s->systmr), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    memory_region_add_subregion(&s->peri_mr, ST_OFFSET,
+                sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->systmr), 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 0,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_ARM_IRQ,
+                               INTERRUPT_ARM_TIMER));
+
     /* UART0 */
     qdev_prop_set_chr(DEVICE(&s->uart0), "chardev", serial_hd(0));
     object_property_set_bool(OBJECT(&s->uart0), true, "realized", &err);
@@ -352,7 +372,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, 
Error **errp)
     }
 
     create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 
0x40);
-    create_unimp(s, &s->systmr, "bcm2835-systimer", ST_OFFSET, 0x20);
     create_unimp(s, &s->cprman, "bcm2835-cprman", CPRMAN_OFFSET, 0x1000);
     create_unimp(s, &s->a2w, "bcm2835-a2w", A2W_OFFSET, 0x1000);
     create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
diff --git a/include/hw/arm/bcm2835_peripherals.h 
b/include/hw/arm/bcm2835_peripherals.h
index be7ad9b499..5b9fc89453 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -24,6 +24,7 @@
 #include "hw/sd/sdhci.h"
 #include "hw/sd/bcm2835_sdhost.h"
 #include "hw/gpio/bcm2835_gpio.h"
+#include "hw/timer/bcm2835_systmr.h"
 #include "hw/misc/unimp.h"
 
 #define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals"
@@ -39,7 +40,7 @@ typedef struct BCM2835PeripheralState {
     MemoryRegion ram_alias[4];
     qemu_irq irq, fiq;
 
-    UnimplementedDeviceState systmr;
+    BCM2835SysTimerState systmr;
     UnimplementedDeviceState armtmr;
     UnimplementedDeviceState cprman;
     UnimplementedDeviceState a2w;
-- 
2.20.1