[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file
From: |
Auger Eric |
Subject: |
Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c |
Date: |
Mon, 23 Sep 2019 16:31:47 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 |
Hi Thomas,
On 9/21/19 5:04 PM, Thomas Huth wrote:
> We are going to make CONFIG_ARM_V7M optional, so the related cortex-m
> CPUs should only be created if the switch is enabled. This can best
> be done if the code resides in a separate file, thus move the related
> functions to a new file v7m.c which only gets compiled if CONFIG_ARM_V7M
> is enabled.
>
> Signed-off-by: Thomas Huth <address@hidden>
> ---
> target/arm/Makefile.objs | 1 +
> target/arm/cpu.c | 146 -----------------------------
> target/arm/v7m.c | 193 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 194 insertions(+), 146 deletions(-)
> create mode 100644 target/arm/v7m.c
>
> diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
> index cf26c16f5f..16b9417a8b 100644
> --- a/target/arm/Makefile.objs
> +++ b/target/arm/Makefile.objs
> @@ -61,6 +61,7 @@ obj-y += translate.o op_helper.o
> obj-y += crypto_helper.o
> obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
> obj-y += m_helper.o
> +obj-$(CONFIG_ARM_V7M) += v7m.o
>
> obj-$(CONFIG_SOFTMMU) += psci.o
>
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index f1f9eecdc8..d5f0d4af61 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -462,31 +462,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int
> interrupt_request)
> return ret;
> }
>
> -#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
> -static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
> -{
> - CPUClass *cc = CPU_GET_CLASS(cs);
> - ARMCPU *cpu = ARM_CPU(cs);
> - CPUARMState *env = &cpu->env;
> - bool ret = false;
> -
> - /* ARMv7-M interrupt masking works differently than -A or -R.
> - * There is no FIQ/IRQ distinction. Instead of I and F bits
> - * masking FIQ and IRQ interrupts, an exception is taken only
> - * if it is higher priority than the current execution priority
> - * (which depends on state like BASEPRI, FAULTMASK and the
> - * currently active exception).
> - */
> - if (interrupt_request & CPU_INTERRUPT_HARD
> - && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
> - cs->exception_index = EXCP_IRQ;
> - cc->do_interrupt(cs);
> - ret = true;
> - }
> - return ret;
> -}
> -#endif
> -
> void arm_cpu_update_virq(ARMCPU *cpu)
> {
> /*
> @@ -1881,119 +1856,6 @@ static void arm11mpcore_initfn(Object *obj)
> cpu->reset_auxcr = 1;
> }
>
> -static void cortex_m0_initfn(Object *obj)
> -{
> - ARMCPU *cpu = ARM_CPU(obj);
> - set_feature(&cpu->env, ARM_FEATURE_V6);
> - set_feature(&cpu->env, ARM_FEATURE_M);
> -
> - cpu->midr = 0x410cc200;
> -}
> -
> -static void cortex_m3_initfn(Object *obj)
> -{
> - ARMCPU *cpu = ARM_CPU(obj);
> - set_feature(&cpu->env, ARM_FEATURE_V7);
> - set_feature(&cpu->env, ARM_FEATURE_M);
> - set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> - cpu->midr = 0x410fc231;
> - cpu->pmsav7_dregion = 8;
> - cpu->id_pfr0 = 0x00000030;
> - cpu->id_pfr1 = 0x00000200;
> - cpu->id_dfr0 = 0x00100000;
> - cpu->id_afr0 = 0x00000000;
> - cpu->id_mmfr0 = 0x00000030;
> - cpu->id_mmfr1 = 0x00000000;
> - cpu->id_mmfr2 = 0x00000000;
> - cpu->id_mmfr3 = 0x00000000;
> - cpu->isar.id_isar0 = 0x01141110;
> - cpu->isar.id_isar1 = 0x02111000;
> - cpu->isar.id_isar2 = 0x21112231;
> - cpu->isar.id_isar3 = 0x01111110;
> - cpu->isar.id_isar4 = 0x01310102;
> - cpu->isar.id_isar5 = 0x00000000;
> - cpu->isar.id_isar6 = 0x00000000;
> -}
> -
> -static void cortex_m4_initfn(Object *obj)
> -{
> - ARMCPU *cpu = ARM_CPU(obj);
> -
> - set_feature(&cpu->env, ARM_FEATURE_V7);
> - set_feature(&cpu->env, ARM_FEATURE_M);
> - set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
> - set_feature(&cpu->env, ARM_FEATURE_VFP4);
> - cpu->midr = 0x410fc240; /* r0p0 */
> - cpu->pmsav7_dregion = 8;
> - cpu->isar.mvfr0 = 0x10110021;
> - cpu->isar.mvfr1 = 0x11000011;
> - cpu->isar.mvfr2 = 0x00000000;
> - cpu->id_pfr0 = 0x00000030;
> - cpu->id_pfr1 = 0x00000200;
> - cpu->id_dfr0 = 0x00100000;
> - cpu->id_afr0 = 0x00000000;
> - cpu->id_mmfr0 = 0x00000030;
> - cpu->id_mmfr1 = 0x00000000;
> - cpu->id_mmfr2 = 0x00000000;
> - cpu->id_mmfr3 = 0x00000000;
> - cpu->isar.id_isar0 = 0x01141110;
> - cpu->isar.id_isar1 = 0x02111000;
> - cpu->isar.id_isar2 = 0x21112231;
> - cpu->isar.id_isar3 = 0x01111110;
> - cpu->isar.id_isar4 = 0x01310102;
> - cpu->isar.id_isar5 = 0x00000000;
> - cpu->isar.id_isar6 = 0x00000000;
> -}
> -
> -static void cortex_m33_initfn(Object *obj)
> -{
> - ARMCPU *cpu = ARM_CPU(obj);
> -
> - set_feature(&cpu->env, ARM_FEATURE_V8);
> - set_feature(&cpu->env, ARM_FEATURE_M);
> - set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> - set_feature(&cpu->env, ARM_FEATURE_M_SECURITY);
> - set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
> - set_feature(&cpu->env, ARM_FEATURE_VFP4);
> - cpu->midr = 0x410fd213; /* r0p3 */
> - cpu->pmsav7_dregion = 16;
> - cpu->sau_sregion = 8;
> - cpu->isar.mvfr0 = 0x10110021;
> - cpu->isar.mvfr1 = 0x11000011;
> - cpu->isar.mvfr2 = 0x00000040;
> - cpu->id_pfr0 = 0x00000030;
> - cpu->id_pfr1 = 0x00000210;
> - cpu->id_dfr0 = 0x00200000;
> - cpu->id_afr0 = 0x00000000;
> - cpu->id_mmfr0 = 0x00101F40;
> - cpu->id_mmfr1 = 0x00000000;
> - cpu->id_mmfr2 = 0x01000000;
> - cpu->id_mmfr3 = 0x00000000;
> - cpu->isar.id_isar0 = 0x01101110;
> - cpu->isar.id_isar1 = 0x02212000;
> - cpu->isar.id_isar2 = 0x20232232;
> - cpu->isar.id_isar3 = 0x01111131;
> - cpu->isar.id_isar4 = 0x01310132;
> - cpu->isar.id_isar5 = 0x00000000;
> - cpu->isar.id_isar6 = 0x00000000;
> - cpu->clidr = 0x00000000;
> - cpu->ctr = 0x8000c000;
> -}
> -
> -static void arm_v7m_class_init(ObjectClass *oc, void *data)
> -{
> - ARMCPUClass *acc = ARM_CPU_CLASS(oc);
> - CPUClass *cc = CPU_CLASS(oc);
> -
> - acc->info = data;
> -#ifndef CONFIG_USER_ONLY
> - cc->do_interrupt = arm_v7m_cpu_do_interrupt;
> -#endif
> -
> - cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
> -}
> -
> static const ARMCPRegInfo cortexr5_cp_reginfo[] = {
> /* Dummy the TCM region regs for the moment */
> { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
> @@ -2518,14 +2380,6 @@ static const ARMCPUInfo arm_cpus[] = {
> { .name = "arm1136", .initfn = arm1136_initfn },
> { .name = "arm1176", .initfn = arm1176_initfn },
> { .name = "arm11mpcore", .initfn = arm11mpcore_initfn },
> - { .name = "cortex-m0", .initfn = cortex_m0_initfn,
> - .class_init = arm_v7m_class_init },
> - { .name = "cortex-m3", .initfn = cortex_m3_initfn,
> - .class_init = arm_v7m_class_init },
> - { .name = "cortex-m4", .initfn = cortex_m4_initfn,
> - .class_init = arm_v7m_class_init },
> - { .name = "cortex-m33", .initfn = cortex_m33_initfn,
> - .class_init = arm_v7m_class_init },
> { .name = "cortex-r5", .initfn = cortex_r5_initfn },
> { .name = "cortex-r5f", .initfn = cortex_r5f_initfn },
> { .name = "cortex-a7", .initfn = cortex_a7_initfn },
> diff --git a/target/arm/v7m.c b/target/arm/v7m.c
> new file mode 100644
> index 0000000000..505043febe
> --- /dev/null
> +++ b/target/arm/v7m.c
> @@ -0,0 +1,193 @@
> +/*
> + * ARM v7m helpers.
> + *
> + * This code is licensed under the GNU GPL v2 or later.
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/qemu-print.h"
> +#include "qemu-common.h"
> +#include "target/arm/idau.h"
> +#include "qemu/module.h"
> +#include "qapi/error.h"
> +#include "qapi/visitor.h"
> +#include "cpu.h"
> +#include "internals.h"
> +#include "exec/exec-all.h"
> +#include "hw/qdev-properties.h"
> +#if !defined(CONFIG_USER_ONLY)
> +#include "hw/loader.h"
> +#include "hw/boards.h"
> +#endif
> +#include "sysemu/sysemu.h"
> +#include "sysemu/tcg.h"
> +#include "sysemu/hw_accel.h"
> +#include "disas/capstone.h"
> +#include "fpu/softfloat.h"
I guess some of those headers are not needed.
> +
> +#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
> +
> +static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
> +{
> + CPUClass *cc = CPU_GET_CLASS(cs);
> + ARMCPU *cpu = ARM_CPU(cs);
> + CPUARMState *env = &cpu->env;
> + bool ret = false;
> +
> + /*
> + * ARMv7-M interrupt masking works differently than -A or -R.
> + * There is no FIQ/IRQ distinction. Instead of I and F bits
> + * masking FIQ and IRQ interrupts, an exception is taken only
> + * if it is higher priority than the current execution priority
> + * (which depends on state like BASEPRI, FAULTMASK and the
> + * currently active exception).
> + */
> + if (interrupt_request & CPU_INTERRUPT_HARD
> + && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
so what is the status wrt m_helper.c which stays unconditionally
compiled. m_helper functions seem to called from target/arm/translate.c
mostly. Have you abandoned the stub idea. It may be confusing to have 2
different helper files. At least a comment explaining where a new helper
shall go may be useful.
Thanks
Eric
> + cs->exception_index = EXCP_IRQ;
> + cc->do_interrupt(cs);
> + ret = true;
> + }
> + return ret;
> +}
> +
> +static void cortex_m0_initfn(Object *obj)
> +{
> + ARMCPU *cpu = ARM_CPU(obj);
> + set_feature(&cpu->env, ARM_FEATURE_V6);
> + set_feature(&cpu->env, ARM_FEATURE_M);
> +
> + cpu->midr = 0x410cc200;
> +}
> +
> +static void cortex_m3_initfn(Object *obj)
> +{
> + ARMCPU *cpu = ARM_CPU(obj);
> + set_feature(&cpu->env, ARM_FEATURE_V7);
> + set_feature(&cpu->env, ARM_FEATURE_M);
> + set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> + cpu->midr = 0x410fc231;
> + cpu->pmsav7_dregion = 8;
> + cpu->id_pfr0 = 0x00000030;
> + cpu->id_pfr1 = 0x00000200;
> + cpu->id_dfr0 = 0x00100000;
> + cpu->id_afr0 = 0x00000000;
> + cpu->id_mmfr0 = 0x00000030;
> + cpu->id_mmfr1 = 0x00000000;
> + cpu->id_mmfr2 = 0x00000000;
> + cpu->id_mmfr3 = 0x00000000;
> + cpu->isar.id_isar0 = 0x01141110;
> + cpu->isar.id_isar1 = 0x02111000;
> + cpu->isar.id_isar2 = 0x21112231;
> + cpu->isar.id_isar3 = 0x01111110;
> + cpu->isar.id_isar4 = 0x01310102;
> + cpu->isar.id_isar5 = 0x00000000;
> + cpu->isar.id_isar6 = 0x00000000;
> +}
> +
> +static void cortex_m4_initfn(Object *obj)
> +{
> + ARMCPU *cpu = ARM_CPU(obj);
> +
> + set_feature(&cpu->env, ARM_FEATURE_V7);
> + set_feature(&cpu->env, ARM_FEATURE_M);
> + set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
> + set_feature(&cpu->env, ARM_FEATURE_VFP4);
> + cpu->midr = 0x410fc240; /* r0p0 */
> + cpu->pmsav7_dregion = 8;
> + cpu->isar.mvfr0 = 0x10110021;
> + cpu->isar.mvfr1 = 0x11000011;
> + cpu->isar.mvfr2 = 0x00000000;
> + cpu->id_pfr0 = 0x00000030;
> + cpu->id_pfr1 = 0x00000200;
> + cpu->id_dfr0 = 0x00100000;
> + cpu->id_afr0 = 0x00000000;
> + cpu->id_mmfr0 = 0x00000030;
> + cpu->id_mmfr1 = 0x00000000;
> + cpu->id_mmfr2 = 0x00000000;
> + cpu->id_mmfr3 = 0x00000000;
> + cpu->isar.id_isar0 = 0x01141110;
> + cpu->isar.id_isar1 = 0x02111000;
> + cpu->isar.id_isar2 = 0x21112231;
> + cpu->isar.id_isar3 = 0x01111110;
> + cpu->isar.id_isar4 = 0x01310102;
> + cpu->isar.id_isar5 = 0x00000000;
> + cpu->isar.id_isar6 = 0x00000000;
> +}
> +
> +static void cortex_m33_initfn(Object *obj)
> +{
> + ARMCPU *cpu = ARM_CPU(obj);
> +
> + set_feature(&cpu->env, ARM_FEATURE_V8);
> + set_feature(&cpu->env, ARM_FEATURE_M);
> + set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
> + set_feature(&cpu->env, ARM_FEATURE_M_SECURITY);
> + set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
> + set_feature(&cpu->env, ARM_FEATURE_VFP4);
> + cpu->midr = 0x410fd213; /* r0p3 */
> + cpu->pmsav7_dregion = 16;
> + cpu->sau_sregion = 8;
> + cpu->isar.mvfr0 = 0x10110021;
> + cpu->isar.mvfr1 = 0x11000011;
> + cpu->isar.mvfr2 = 0x00000040;
> + cpu->id_pfr0 = 0x00000030;
> + cpu->id_pfr1 = 0x00000210;
> + cpu->id_dfr0 = 0x00200000;
> + cpu->id_afr0 = 0x00000000;
> + cpu->id_mmfr0 = 0x00101F40;
> + cpu->id_mmfr1 = 0x00000000;
> + cpu->id_mmfr2 = 0x01000000;
> + cpu->id_mmfr3 = 0x00000000;
> + cpu->isar.id_isar0 = 0x01101110;
> + cpu->isar.id_isar1 = 0x02212000;
> + cpu->isar.id_isar2 = 0x20232232;
> + cpu->isar.id_isar3 = 0x01111131;
> + cpu->isar.id_isar4 = 0x01310132;
> + cpu->isar.id_isar5 = 0x00000000;
> + cpu->isar.id_isar6 = 0x00000000;
> + cpu->clidr = 0x00000000;
> + cpu->ctr = 0x8000c000;
> +}
> +
> +static void arm_v7m_class_init(ObjectClass *oc, void *data)
> +{
> + ARMCPUClass *acc = ARM_CPU_CLASS(oc);
> + CPUClass *cc = CPU_CLASS(oc);
> +
> + acc->info = data;
> +#ifndef CONFIG_USER_ONLY
> + cc->do_interrupt = arm_v7m_cpu_do_interrupt;
> +#endif
> +
> + cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
> +}
> +
> +static const ARMCPUInfo arm_v7m_cpus[] = {
> + { .name = "cortex-m0", .initfn = cortex_m0_initfn,
> + .class_init = arm_v7m_class_init },
> + { .name = "cortex-m3", .initfn = cortex_m3_initfn,
> + .class_init = arm_v7m_class_init },
> + { .name = "cortex-m4", .initfn = cortex_m4_initfn,
> + .class_init = arm_v7m_class_init },
> + { .name = "cortex-m33", .initfn = cortex_m33_initfn,
> + .class_init = arm_v7m_class_init },
> + { .name = NULL }
> +};
> +
> +static void arm_v7m_cpu_register_types(void)
> +{
> + const ARMCPUInfo *info = arm_v7m_cpus;
> +
> + while (info->name) {
> + arm_cpu_register(info);
> + info++;
> + }
> +}
> +
> +type_init(arm_v7m_cpu_register_types)
> +
> +#endif
>
Thanks
Eric
- [PATCH 0/4] Make it possible to compile with CONFIG_ARM_V7M=n, Thomas Huth, 2019/09/21
- [PATCH 1/4] target/arm: Make cpu_register() and set_feature() available for other files, Thomas Huth, 2019/09/21
- [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c, Thomas Huth, 2019/09/21
- Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c,
Auger Eric <=
- Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c, Auger Eric, 2019/09/24
- Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c, Thomas Huth, 2019/09/24
- Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c, Auger Eric, 2019/09/24
Re: [PATCH 2/4] target/arm: Move cortex-m related functions to new file v7m.c, Peter Maydell, 2019/09/23
[PATCH 3/4] hw/arm: Move armv7m_nvic.c to hw/arm/ and always enable it for arm builds, Thomas Huth, 2019/09/21