[Qemu-arm] [PATCH v4 0/3] Add Aspeed GPIO controller model

[Rashmica Gupta]

v4:
- proper interupt handling thanks to Andrew
- switch statements for reading and writing suggested by Peter
- some small cleanups suggested by Alexey

v3:
- didn't have each gpio set up as an irq 
- now can't access set AC on ast2400 (only exists on ast2500)
- added ast2600 implementation (patch 3)
- renamed a couple of variables for clarity

v2: Addressed Andrew's feedback, added debounce regs, renamed get/set to
read/write to minimise confusion with a 'set' of registers.

Rashmica Gupta (3):
  hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500
  aspeed: add a GPIO controller to the SoC
  hw/gpio: Add in AST2600 specific implementation

 hw/arm/aspeed_soc.c           |   17 +
 hw/gpio/Makefile.objs         |    1 +
 hw/gpio/aspeed_gpio.c         | 1054 +++++++++++++++++++++++++++++++++
 include/hw/arm/aspeed_soc.h   |    3 +
 include/hw/gpio/aspeed_gpio.h |  107 ++++
 slirp                         |    2 +-
 6 files changed, 1183 insertions(+), 1 deletion(-)
 create mode 100644 hw/gpio/aspeed_gpio.c
 create mode 100644 include/hw/gpio/aspeed_gpio.h

-- 
2.20.1