[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot
From: |
Shameerali Kolothum Thodi |
Subject: |
Re: [Qemu-arm] [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot |
Date: |
Wed, 1 May 2019 10:49:42 +0000 |
Hi Eric,
> -----Original Message-----
> From: Auger Eric [mailto:address@hidden
> Sent: 30 April 2019 17:34
> To: Shameerali Kolothum Thodi <address@hidden>;
> address@hidden; address@hidden; address@hidden
> Cc: address@hidden; address@hidden;
> address@hidden; address@hidden; xuwei (O)
> <address@hidden>; address@hidden; address@hidden;
> Linuxarm <address@hidden>
> Subject: Re: [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot plug
> with ACPI boot
>
> Hi Shameer,
>
> On 4/9/19 12:29 PM, Shameer Kolothum wrote:
> > This initializes the GED device with base memory and irq, configures
> > ged memory hotplug event and builds the corresponding aml code. GED
> > irq routing to Guest is also enabled. With this, both hot and cold
> > plug of device memory is enabled now for Guest with ACPI boot.
> >
> > Memory cold plug support with Guest DT boot is not yet supported.
> >
> > Signed-off-by: Shameer Kolothum <address@hidden>
> Individual history logs may be helpful to follow the changes (change in
> MMIO reggion size, ...)
Ok. Noted.
> > ---
> > default-configs/arm-softmmu.mak | 2 ++
> > hw/arm/virt-acpi-build.c | 9 ++++++
> > hw/arm/virt.c | 61
> +++++++++++++++++++++++++++++++++++++++--
> > include/hw/arm/virt.h | 4 +++
> > 4 files changed, 73 insertions(+), 3 deletions(-)
> >
> > diff --git a/default-configs/arm-softmmu.mak
> b/default-configs/arm-softmmu.mak
> > index 9f4b803..c9a9b34 100644
> > --- a/default-configs/arm-softmmu.mak
> > +++ b/default-configs/arm-softmmu.mak
> > @@ -163,3 +163,5 @@ CONFIG_LSI_SCSI_PCI=y
> >
> > CONFIG_MEM_DEVICE=y
> > CONFIG_DIMM=y
> > +CONFIG_ACPI_MEMORY_HOTPLUG=y
> > +CONFIG_ACPI_HW_REDUCED=y
> > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> > index bf9c0bc..1ad394b 100644
> > --- a/hw/arm/virt-acpi-build.c
> > +++ b/hw/arm/virt-acpi-build.c
> > @@ -40,6 +40,8 @@
> > #include "hw/loader.h"
> > #include "hw/hw.h"
> > #include "hw/acpi/aml-build.h"
> > +#include "hw/acpi/memory_hotplug.h"
> > +#include "hw/acpi/generic_event_device.h"
> > #include "hw/pci/pcie_host.h"
> > #include "hw/pci/pci.h"
> > #include "hw/arm/virt.h"
> > @@ -727,6 +729,7 @@ static void
> > build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
> > {
> > Aml *scope, *dsdt;
> > + MachineState *ms = MACHINE(vms);
> > const MemMapEntry *memmap = vms->memmap;
> > const int *irqmap = vms->irqmap;
> >
> > @@ -753,6 +756,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> VirtMachineState *vms)
> > (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
> > acpi_dsdt_add_power_button(scope);
> >
> > + build_ged_aml(scope, "\\_SB."GED_DEVICE,
> HOTPLUG_HANDLER(vms->acpi_dev),
> > + irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE,
> AML_SYSTEM_MEMORY);
> > +
> > + build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL,
> > + AML_SYSTEM_MEMORY);
> > +
> > aml_append(dsdt, scope);
> >
> > /* copy AML table into ACPI tables blob and patch header there */
> > diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> > index da516b3..8179b3e 100644
> > --- a/hw/arm/virt.c
> > +++ b/hw/arm/virt.c
> > @@ -63,6 +63,7 @@
> > #include "target/arm/internals.h"
> > #include "hw/mem/pc-dimm.h"
> > #include "hw/mem/nvdimm.h"
> > +#include "hw/acpi/generic_event_device.h"
> >
> > #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
> > static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
> > @@ -133,6 +134,8 @@ static const MemMapEntry base_memmap[] = {
> > [VIRT_GPIO] = { 0x09030000, 0x00001000 },
> > [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 },
> > [VIRT_SMMU] = { 0x09050000, 0x00020000 },
> > + [VIRT_PCDIMM_ACPI] = { 0x09070000,
> MEMORY_HOTPLUG_IO_LEN },
> > + [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_REG_LEN },>
> [VIRT_MMIO] = { 0x0a000000, 0x00000200 },
> > /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that
> size */
> > [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },
> > @@ -168,6 +171,7 @@ static const int a15irqmap[] = {
> > [VIRT_PCIE] = 3, /* ... to 6 */
> > [VIRT_GPIO] = 7,
> > [VIRT_SECURE_UART] = 8,
> > + [VIRT_ACPI_GED] = 9,
> > [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
> > [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
> > [VIRT_SMMU] = 74, /* ...to 74 + NUM_SMMU_IRQS - 1 */
> > @@ -183,6 +187,13 @@ static const char *valid_cpus[] = {
> > ARM_CPU_TYPE_NAME("max"),
> > };
> >
> > +static GedEvent ged_events[] = {
> > + {
> > + .selector = ACPI_GED_IRQ_SEL_MEM,
> > + .event = GED_MEMORY_HOTPLUG,
> > + },
> > +};
> > +
> > static bool cpu_type_valid(const char *cpu)
> > {
> > int i;
> > @@ -516,6 +527,26 @@ static void fdt_add_pmu_nodes(const
> VirtMachineState *vms)
> > }
> > }
> >
> > +static inline DeviceState *create_acpi_ged(VirtMachineState *vms)
> > +{
> > + DeviceState *dev;
> > +
> > + dev = DEVICE(object_new(TYPE_ACPI_GED));
> > + qdev_prop_set_uint64(dev, "memhp-base",
> > + vms->memmap[VIRT_PCDIMM_ACPI].base);
> > + qdev_prop_set_ptr(dev, "gsi", vms->gsi);
> > + qdev_prop_set_uint64(dev, "ged-base",
> vms->memmap[VIRT_ACPI_GED].base);
> > + qdev_prop_set_uint32(dev, "ged-irq", vms->irqmap[VIRT_ACPI_GED]);
> so as commented earlier I wonder why we can directly pass the right gsi.
Ok.
> > + qdev_prop_set_ptr(dev, "ged-events", ged_events);
> > + qdev_prop_set_uint32(dev, "ged-events-size",
> ARRAY_SIZE(ged_events));
> > +
> > + object_property_add_child(qdev_get_machine(), "acpi-ged",
> > + OBJECT(dev), NULL);
> > + qdev_init_nofail(dev);
> > +
> > + return dev;
> > +}
> > +
> > static void create_its(VirtMachineState *vms, DeviceState *gicdev)
> > {
> > const char *itsclass = its_class_name();
> > @@ -555,6 +586,12 @@ static void create_v2m(VirtMachineState *vms,
> qemu_irq *pic)
> > fdt_add_v2m_gic_node(vms);
> > }
> >
> > +static void virt_gsi_handler(void *opaque, int n, int level)
> > +{
> > + qemu_irq *gic_irq = opaque;
> > + qemu_set_irq(gic_irq[n], level);
> In https://patchwork.kernel.org/patch/10863285/, I asked why this gsi
> routing was necessary. Please forgive me if I missed your answer but I
> still don't get why it is necessary.
Yes, you did. As I commented in 3/8, I missed this for v4. I don’t think we
need this
routing If we pass the right qemu_irq directly. I will change this in next
revision.
Thanks,
Shameer
> > +}
> > +
> > static void create_gic(VirtMachineState *vms, qemu_irq *pic)
> > {
> > /* We create a standalone GIC */
> > @@ -670,6 +707,8 @@ static void create_gic(VirtMachineState *vms,
> qemu_irq *pic)
> > pic[i] = qdev_get_gpio_in(gicdev, i);
> > }
> >
> > + vms->gsi = qemu_allocate_irqs(virt_gsi_handler, pic, NUM_IRQS);
> > +
> > fdt_add_gic_node(vms);
> >
> > if (type == 3 && vms->its) {
> > @@ -1418,7 +1457,7 @@ static void machvirt_init(MachineState *machine)
> > VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(machine);
> > MachineClass *mc = MACHINE_GET_CLASS(machine);
> > const CPUArchIdList *possible_cpus;
> > - qemu_irq pic[NUM_IRQS];
> > + qemu_irq *pic;
> > MemoryRegion *sysmem = get_system_memory();
> > MemoryRegion *secure_sysmem = NULL;
> > int n, virt_max_cpus;
> > @@ -1614,6 +1653,7 @@ static void machvirt_init(MachineState *machine)
> >
> > create_flash(vms, sysmem, secure_sysmem ? secure_sysmem :
> sysmem);
> >
> > + pic = g_new0(qemu_irq, NUM_IRQS);
> > create_gic(vms, pic);
> >
> > fdt_add_pmu_nodes(vms);
> > @@ -1644,6 +1684,8 @@ static void machvirt_init(MachineState *machine)
> >
> > create_platform_bus(vms, pic);
> >
> > + vms->acpi_dev = create_acpi_ged(vms);
> > +
> > vms->bootinfo.ram_size = machine->ram_size;
> > vms->bootinfo.kernel_filename = machine->kernel_filename;
> > vms->bootinfo.kernel_cmdline = machine->kernel_cmdline;
> > @@ -1811,21 +1853,34 @@ static const CPUArchIdList
> *virt_possible_cpu_arch_ids(MachineState *ms)
> > static void virt_memory_pre_plug(HotplugHandler *hotplug_dev,
> DeviceState *dev,
> > Error **errp)
> > {
> > - if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > - error_setg(errp, "memory cold/hot plug is not yet supported");
> > + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> > + const bool is_nvdimm = object_dynamic_cast(OBJECT(dev),
> TYPE_NVDIMM);
> > +
> > + if (is_nvdimm) {
> > + error_setg(errp, "nvdimm is not yet supported");
> > return;
> > }
> >
> > + if (!vms->acpi_dev) {
> > + error_setg(errp, "memory hotplug is not enabled: missing acpi
> device");
> > + return;
> > + }
> > +
> > + hotplug_handler_pre_plug(HOTPLUG_HANDLER(vms->acpi_dev), dev,
> errp);
> > +
> > pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), NULL,
> errp);
> > }
> >
> > static void virt_memory_plug(HotplugHandler *hotplug_dev,
> > DeviceState *dev, Error **errp)
> > {
> > + HotplugHandlerClass *hhc;
> > VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> >
> > pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), NULL);
> >
> > + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
> > + hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, NULL);
> > }
> >
> > static void virt_machine_device_pre_plug_cb(HotplugHandler
> *hotplug_dev,
> > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> > index 507517c..9c6b0b1 100644
> > --- a/include/hw/arm/virt.h
> > +++ b/include/hw/arm/virt.h
> > @@ -77,6 +77,8 @@ enum {
> > VIRT_GPIO,
> > VIRT_SECURE_UART,
> > VIRT_SECURE_MEM,
> > + VIRT_PCDIMM_ACPI,
> > + VIRT_ACPI_GED,
> > VIRT_LOWMEMMAP_LAST,
> > };
> >
> > @@ -132,6 +134,8 @@ typedef struct {
> > uint32_t iommu_phandle;
> > int psci_conduit;
> > hwaddr highest_gpa;
> > + DeviceState *acpi_dev;
> > + qemu_irq *gsi;
> > } VirtMachineState;
> >
> > #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM :
> VIRT_PCIE_ECAM)
> Thanks
>
> Eric
> >
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-arm] [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot,
Shameerali Kolothum Thodi <=