[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v3 05/10] hw/arm/virt: Add ACPI support for device
From: |
Shameerali Kolothum Thodi |
Subject: |
Re: [Qemu-arm] [PATCH v3 05/10] hw/arm/virt: Add ACPI support for device memory cold-plug |
Date: |
Mon, 1 Apr 2019 14:51:51 +0000 |
Hi Igor,
> -----Original Message-----
> From: Igor Mammedov [mailto:address@hidden
> Sent: 01 April 2019 14:43
> To: Auger Eric <address@hidden>
> Cc: Shameerali Kolothum Thodi <address@hidden>;
> address@hidden; address@hidden; address@hidden;
> address@hidden; address@hidden;
> address@hidden; Linuxarm <address@hidden>; xuwei (O)
> <address@hidden>
> Subject: Re: [PATCH v3 05/10] hw/arm/virt: Add ACPI support for device
> memory cold-plug
>
> On Fri, 29 Mar 2019 10:31:14 +0100
> Auger Eric <address@hidden> wrote:
>
> > Hi Shameer,
> >
> > On 3/21/19 11:47 AM, Shameer Kolothum wrote:
> > > This adds support to build the aml code so that Guest(ACPI boot)
> > > can see the cold-plugged device memory. Memory cold plug support
> > > with DT boot is not yet enabled.
> > >
> > > Signed-off-by: Shameer Kolothum
> <address@hidden>
> > > ---
> > > default-configs/arm-softmmu.mak | 2 ++
> > > hw/acpi/generic_event_device.c | 23
> +++++++++++++++++++++++
> > > hw/arm/virt-acpi-build.c | 9 +++++++++
> > > hw/arm/virt.c | 23
> +++++++++++++++++++++++
> > > include/hw/acpi/generic_event_device.h | 5 +++++
> > > include/hw/arm/virt.h | 2 ++
> > > 6 files changed, 64 insertions(+)
> > >
> > > diff --git a/default-configs/arm-softmmu.mak
> b/default-configs/arm-softmmu.mak
> > > index 795cb89..6db444e 100644
> > > --- a/default-configs/arm-softmmu.mak
> > > +++ b/default-configs/arm-softmmu.mak
> > > @@ -162,3 +162,5 @@ CONFIG_LSI_SCSI_PCI=y
> > >
> > > CONFIG_MEM_DEVICE=y
> > > CONFIG_DIMM=y
> > > +CONFIG_ACPI_MEMORY_HOTPLUG=y
> > > +CONFIG_ACPI_HW_REDUCED=y
> > > diff --git a/hw/acpi/generic_event_device.c
> b/hw/acpi/generic_event_device.c
> > > index b21a551..0b32fc9 100644
> > > --- a/hw/acpi/generic_event_device.c
> > > +++ b/hw/acpi/generic_event_device.c
> > > @@ -16,13 +16,26 @@
> > > */
> > >
> > > #include "qemu/osdep.h"
> > > +#include "qapi/error.h"
> > > +#include "exec/address-spaces.h"
> > > #include "hw/sysbus.h"
> > > #include "hw/acpi/acpi.h"
> > > #include "hw/acpi/generic_event_device.h"
> > > +#include "hw/mem/pc-dimm.h"
> > >
> > > static void virt_device_plug_cb(HotplugHandler *hotplug_dev,
> > > DeviceState *dev, Error **errp)
> > > {
> > > + VirtAcpiState *s = VIRT_ACPI(hotplug_dev);
> > > +
> > > + if (s->memhp_state.is_enabled &&
> > > + object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > > + acpi_memory_plug_cb(hotplug_dev, &s->memhp_state,
> > > + dev, errp);
> > > + } else {
> > > + error_setg(errp, "virt: device plug request for unsupported
> device"
> > > + " type: %s", object_get_typename(OBJECT(dev)));
> > > + }
> > > }
> > >
> > > static void virt_send_ged(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
> > > @@ -31,9 +44,19 @@ static void virt_send_ged(AcpiDeviceIf *adev,
> AcpiEventStatusBits ev)
> > >
> > > static void virt_device_realize(DeviceState *dev, Error **errp)
> > > {
> > > + VirtAcpiState *s = VIRT_ACPI(dev);
> > > +
> > > + if (s->memhp_state.is_enabled) {
> > > + acpi_memory_hotplug_init(get_system_memory(),
> OBJECT(dev),
> > > + &s->memhp_state,
> > > + s->memhp_base);
> > > + }
> > > }
> > >
> > > static Property virt_acpi_properties[] = {
> > > + DEFINE_PROP_UINT64("memhp_base", VirtAcpiState, memhp_base,
> 0),
> > > + DEFINE_PROP_BOOL("memory-hotplug-support", VirtAcpiState,
> > > + memhp_state.is_enabled, true),>
> DEFINE_PROP_END_OF_LIST(),
> > > };
> > >
> > > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> > > index bf9c0bc..20d3c83 100644
> > > --- a/hw/arm/virt-acpi-build.c
> > > +++ b/hw/arm/virt-acpi-build.c
> > > @@ -40,6 +40,7 @@
> > > #include "hw/loader.h"
> > > #include "hw/hw.h"
> > > #include "hw/acpi/aml-build.h"
> > > +#include "hw/acpi/memory_hotplug.h"
> > > #include "hw/pci/pcie_host.h"
> > > #include "hw/pci/pci.h"
> > > #include "hw/arm/virt.h"
> > > @@ -49,6 +50,13 @@
> > > #define ARM_SPI_BASE 32
> > > #define ACPI_POWER_BUTTON_DEVICE "PWRB"
> > >
> > > +static void acpi_dsdt_add_memory_hotplug(Aml *scope, MachineState
> *ms)
> > > +{
> > > + uint32_t nr_mem = ms->ram_slots;
> > > +
> > > + build_memory_hotplug_aml(scope, nr_mem, "\\_SB", NULL,
> AML_SYSTEM_MEMORY);
> > > +}
> > > +
> > > static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
> > > {
> > > uint16_t i;
> > > @@ -740,6 +748,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> VirtMachineState *vms)
> > > * the RTC ACPI device at all when using UEFI.
> > > */
> > > scope = aml_scope("\\_SB");
> > > + acpi_dsdt_add_memory_hotplug(scope, MACHINE(vms));
> > > acpi_dsdt_add_cpus(scope, vms->smp_cpus);
> > > acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
> > > (irqmap[VIRT_UART] + ARM_SPI_BASE));
> > > diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> > > index d0ff20d..13db0e9 100644
> > > --- a/hw/arm/virt.c
> > > +++ b/hw/arm/virt.c
> > > @@ -133,6 +133,7 @@ static const MemMapEntry base_memmap[] = {
> > > [VIRT_GPIO] = { 0x09030000, 0x00001000 },
> > > [VIRT_SECURE_UART] = { 0x09040000, 0x00001000 },
> > > [VIRT_SMMU] = { 0x09050000, 0x00020000 },
> > > + [VIRT_PCDIMM_ACPI] = { 0x09070000, 0x00010000 },
> > > [VIRT_MMIO] = { 0x0a000000, 0x00000200 },
> > > /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of
> that size */
> > > [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },
> > > @@ -516,6 +517,18 @@ static void fdt_add_pmu_nodes(const
> VirtMachineState *vms)
> > > }
> > > }
> > >
> > > +static DeviceState *create_virt_acpi(VirtMachineState *vms)
> > > +{
> > > + DeviceState *dev;
> > > +
> > > + dev = qdev_create(NULL, "virt-acpi");
> > > + qdev_prop_set_uint64(dev, "memhp_base",
> > > +
> vms->memmap[VIRT_PCDIMM_ACPI].base);
> > Maybe add a comment that a property is requested to integrated with
> > acpi_memory_hotplug_init() (if I am not wrong). Otherwise we can wonder
> > why sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, <base>) is not used as for
> > standard sysbus devices?
>
> Why it's inherited from SYS_BUS_DEVICE to begin with?
Hmm..I don't have a clear answer to that other than the fact that just reused
the way other platform devices are created pl011/pl061/smmu etc. Also PCI
doesn't look like an obvious one here. Please let me know if there is a better
way of doing this.
> >
> > > + qdev_init_nofail(dev);
> > > +
> > > + return dev;
> > > +}
> > > +
> > > static void create_its(VirtMachineState *vms, DeviceState *gicdev)
> > > {
> > > const char *itsclass = its_class_name();
> > > @@ -1644,6 +1657,8 @@ static void machvirt_init(MachineState
> *machine)
> > >
> > > create_platform_bus(vms, pic);
> > >
> > > + vms->acpi = create_virt_acpi(vms);I can see that on PC machines,
> they use a link property to set the
> > acpi_dev. I am unsure about the exact reason, any idea?
>
> pc and q35 machine have different devices that implement ACPI interface
> and live somewhere else in the system and also honor -no-acpi CLI option.
> Link allows to cache reference to whatever device in use and manage CLI
> expectations (if I recall it correctly).
Thanks for clarifying this.
>
> > > +
> > > vms->bootinfo.ram_size = machine->ram_size;
> > > vms->bootinfo.kernel_filename = machine->kernel_filename;
> > > vms->bootinfo.kernel_cmdline = machine->kernel_cmdline;
> > > @@ -1828,11 +1843,19 @@ static void
> virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
> > > static void virt_memory_plug(HotplugHandler *hotplug_dev,
> > > DeviceState *dev, Error **errp)
> > > {
> > > + HotplugHandlerClass *hhc;
> > > VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> > > Error *local_err = NULL;
> > >
> > > pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), &local_err);
> > > + if (local_err) {
> > > + goto out;
> > > + }
> > > +
> > > + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi);
> > > + hhc->plug(HOTPLUG_HANDLER(vms->acpi), dev, &error_abort);
> > Why error_abort instead of propagating the error?
>
> After last round of changes to hotplug handler, it's deemed that plug()
> handler
> should not fail (I didn't get my hands on removing error argument from
> interface
> yet). All checks and graceful abort should happen at pre_plug() stage.
Ok. I will address this in next revision.
Thanks,
Shameer
> > >
> > > +out:
> > > error_propagate(errp, local_err);
> > > }
> > >
> > > diff --git a/include/hw/acpi/generic_event_device.h
> b/include/hw/acpi/generic_event_device.h
> > > index f314515..262ca7d 100644
> > > --- a/include/hw/acpi/generic_event_device.h
> > > +++ b/include/hw/acpi/generic_event_device.h
> > > @@ -18,12 +18,17 @@
> > > #ifndef HW_ACPI_GED_H
> > > #define HW_ACPI_GED_H
> > >
> > > +#include "hw/acpi/memory_hotplug.h"
> > > +
> > > #define TYPE_VIRT_ACPI "virt-acpi"
> > > #define VIRT_ACPI(obj) \
> > > OBJECT_CHECK(VirtAcpiState, (obj), TYPE_VIRT_ACPI)
> > >
> > > typedef struct VirtAcpiState {
> > > SysBusDevice parent_obj;
> > > + MemHotplugState memhp_state;
> > > + hwaddr memhp_base;
> > > } VirtAcpiState;
> > >
> > > +
> > spurious newline
> >
> > Thanks
> >
> > Eric
> > > #endif
> > > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> > > index 507517c..c5e4c96 100644
> > > --- a/include/hw/arm/virt.h
> > > +++ b/include/hw/arm/virt.h
> > > @@ -77,6 +77,7 @@ enum {
> > > VIRT_GPIO,
> > > VIRT_SECURE_UART,
> > > VIRT_SECURE_MEM,
> > > + VIRT_PCDIMM_ACPI,
> > > VIRT_LOWMEMMAP_LAST,
> > > };
> > >
> > > @@ -132,6 +133,7 @@ typedef struct {
> > > uint32_t iommu_phandle;
> > > int psci_conduit;
> > > hwaddr highest_gpa;
> > > + DeviceState *acpi;
> > > } VirtMachineState;
> > >
> > > #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM :
> VIRT_PCIE_ECAM)
> > >