[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [Qemu-devel RFC v2 0/4] Add support for Smartfusion2 SoC
From: |
Subbaraya Sundeep |
Subject: |
[Qemu-arm] [Qemu-devel RFC v2 0/4] Add support for Smartfusion2 SoC |
Date: |
Sun, 9 Apr 2017 16:49:14 +0530 |
Hi Qemu-devel,
I am trying to add Smartfusion2 SoC.
SoC is from Microsemi and System on Module(SOM)
board is from Emcraft systems. Smartfusion2 has hardened
Microcontroller(Cortex-M3)based Sub System and FPGA fabric.
At the moment only system timer, sysreg and SPI
controller are modelled.
Testing:
./arm-softmmu/qemu-system-arm -M smartfusion2-som -serial mon:stdio \
-kernel u-boot.bin -display none -drive file=spi.bin,if=mtd,format=raw
U-boot is from Emcraft with modified SPI driver not to use PDMA.
Linux is 4.5 linux with Smartfusion2 SoC dts and clocksource
driver added by myself @
https://github.com/Subbaraya-Sundeep/linux.git
Baremetal elfs from Microsemi Softconsole IDE are also working.
Changes from v1:
Added SPI controller.
Thanks,
Sundeep
Subbaraya Sundeep (4):
msf2: Add Smartfusion2 System timer
msf2: Microsemi Smartfusion2 System Register block.
msf2: Add Smartfusion2 SPI controller
msf2: Add Emcraft's Smartfusion2 SOM kit.
default-configs/arm-softmmu.mak | 1 +
hw/arm/Makefile.objs | 2 +-
hw/arm/msf2_soc.c | 141 +++++++++++++
hw/misc/Makefile.objs | 1 +
hw/misc/msf2_sysreg.c | 168 +++++++++++++++
hw/ssi/Makefile.objs | 1 +
hw/ssi/msf2_spi.c | 449 ++++++++++++++++++++++++++++++++++++++++
hw/timer/Makefile.objs | 1 +
hw/timer/msf2_timer.c | 273 ++++++++++++++++++++++++
9 files changed, 1036 insertions(+), 1 deletion(-)
create mode 100644 hw/arm/msf2_soc.c
create mode 100644 hw/misc/msf2_sysreg.c
create mode 100644 hw/ssi/msf2_spi.c
create mode 100644 hw/timer/msf2_timer.c
--
2.5.0
- [Qemu-arm] [Qemu-devel RFC v2 0/4] Add support for Smartfusion2 SoC,
Subbaraya Sundeep <=