[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH RFC 12/16] hw/arm/virt: rename *.smp_cpus to *.cpus
From: |
Andrew Jones |
Subject: |
[Qemu-arm] [PATCH RFC 12/16] hw/arm/virt: rename *.smp_cpus to *.cpus |
Date: |
Fri, 10 Jun 2016 19:40:23 +0200 |
Use the name 'cpus' instead of 'smp_cpus' to be consistent with
MachineState.cpus. This also makes grepping for the global
smp_cpus easier.
Signed-off-by: Andrew Jones <address@hidden>
---
hw/arm/virt-acpi-build.c | 14 +++++++-------
hw/arm/virt.c | 14 +++++++-------
include/hw/arm/virt-acpi-build.h | 2 +-
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 735ab864a03dd..95dccb2e0c3fa 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -48,11 +48,11 @@
#define ARM_SPI_BASE 32
#define ACPI_POWER_BUTTON_DEVICE "PWRB"
-static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
+static void acpi_dsdt_add_cpus(Aml *scope, int nr_cpus)
{
uint16_t i;
- for (i = 0; i < smp_cpus; i++) {
+ for (i = 0; i < nr_cpus; i++) {
Aml *dev = aml_device("C%03x", i);
aml_append(dev, aml_name_decl("_HID", aml_string("ACPI0007")));
aml_append(dev, aml_name_decl("_UID", aml_int(i)));
@@ -423,9 +423,9 @@ build_srat(GArray *table_data, BIOSLinker *linker,
VirtGuestInfo *guest_info)
AcpiSratMemoryAffinity *numamem;
int i, j, srat_start;
uint64_t mem_base;
- uint32_t *cpu_node = g_malloc0(guest_info->smp_cpus * sizeof(uint32_t));
+ uint32_t *cpu_node = g_malloc0(guest_info->cpus * sizeof(uint32_t));
- for (i = 0; i < guest_info->smp_cpus; i++) {
+ for (i = 0; i < guest_info->cpus; i++) {
for (j = 0; j < nb_numa_nodes; j++) {
if (test_bit(i, numa_info[j].node_cpu)) {
cpu_node[i] = j;
@@ -438,7 +438,7 @@ build_srat(GArray *table_data, BIOSLinker *linker,
VirtGuestInfo *guest_info)
srat = acpi_data_push(table_data, sizeof(*srat));
srat->reserved1 = cpu_to_le32(1);
- for (i = 0; i < guest_info->smp_cpus; ++i) {
+ for (i = 0; i < guest_info->cpus; ++i) {
core = acpi_data_push(table_data, sizeof(*core));
core->type = ACPI_SRAT_PROCESSOR_GICC;
core->length = sizeof(*core);
@@ -524,7 +524,7 @@ build_madt(GArray *table_data, BIOSLinker *linker,
VirtGuestInfo *guest_info)
gicd->length = sizeof(*gicd);
gicd->base_address = memmap[VIRT_GIC_DIST].base;
- for (i = 0; i < guest_info->smp_cpus; i++) {
+ for (i = 0; i < guest_info->cpus; i++) {
AcpiMadtGenericInterrupt *gicc = acpi_data_push(table_data,
sizeof *gicc);
ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i));
@@ -606,7 +606,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
VirtGuestInfo *guest_info)
* the RTC ACPI device at all when using UEFI.
*/
scope = aml_scope("\\_SB");
- acpi_dsdt_add_cpus(scope, guest_info->smp_cpus);
+ acpi_dsdt_add_cpus(scope, guest_info->cpus);
acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
(irqmap[VIRT_UART] + ARM_SPI_BASE));
acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]);
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 73113cfc4d9c9..78d9aa996bafc 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -69,7 +69,7 @@ typedef struct VirtBoardInfo {
const char *cpu_model;
const MemMapEntry *memmap;
const int *irqmap;
- int smp_cpus;
+ int cpus;
void *fdt;
int fdt_size;
uint32_t clock_phandle;
@@ -304,7 +304,7 @@ static void fdt_add_timer_nodes(const VirtBoardInfo *vbi,
int gictype)
if (gictype == 2) {
irqflags = deposit32(irqflags, GIC_FDT_IRQ_PPI_CPU_START,
GIC_FDT_IRQ_PPI_CPU_WIDTH,
- (1 << vbi->smp_cpus) - 1);
+ (1 << vbi->cpus) - 1);
}
qemu_fdt_add_subnode(vbi->fdt, "/timer");
@@ -345,7 +345,7 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
* The simplest way to go is to examine affinity IDs of all our CPUs. If
* at least one of them has Aff3 populated, we set #address-cells to 2.
*/
- for (cpu = 0; cpu < vbi->smp_cpus; cpu++) {
+ for (cpu = 0; cpu < vbi->cpus; cpu++) {
ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
if (armcpu->mp_affinity & ARM_AFF3_MASK) {
@@ -358,7 +358,7 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#address-cells", addr_cells);
qemu_fdt_setprop_cell(vbi->fdt, "/cpus", "#size-cells", 0x0);
- for (cpu = vbi->smp_cpus - 1; cpu >= 0; cpu--) {
+ for (cpu = vbi->cpus - 1; cpu >= 0; cpu--) {
char *nodename = g_strdup_printf("/cpus/address@hidden", cpu);
ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu));
@@ -367,7 +367,7 @@ static void fdt_add_cpu_nodes(const VirtBoardInfo *vbi)
qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible",
armcpu->dtb_compatible);
- if (vbi->using_psci && vbi->smp_cpus > 1) {
+ if (vbi->using_psci && vbi->cpus > 1) {
qemu_fdt_setprop_string(vbi->fdt, nodename,
"enable-method", "psci");
}
@@ -1170,7 +1170,7 @@ static void machvirt_init(MachineState *machine)
exit(1);
}
- vbi->smp_cpus = smp_cpus;
+ vbi->cpus = smp_cpus;
if (machine->ram_size > vbi->memmap[VIRT_MEM].size) {
error_report("mach-virt: cannot model more than %dGB RAM",
RAMLIMIT_GB);
@@ -1281,7 +1281,7 @@ static void machvirt_init(MachineState *machine)
create_fw_cfg(vbi, &address_space_memory);
rom_set_fw(fw_cfg_find());
- guest_info->smp_cpus = smp_cpus;
+ guest_info->cpus = smp_cpus;
guest_info->fw_cfg = fw_cfg_find();
guest_info->memmap = vbi->memmap;
guest_info->irqmap = vbi->irqmap;
diff --git a/include/hw/arm/virt-acpi-build.h b/include/hw/arm/virt-acpi-build.h
index e43330ad659b0..d6c5982960403 100644
--- a/include/hw/arm/virt-acpi-build.h
+++ b/include/hw/arm/virt-acpi-build.h
@@ -27,7 +27,7 @@
#define ACPI_GICC_ENABLED 1
typedef struct VirtGuestInfo {
- int smp_cpus;
+ int cpus;
FWCfgState *fw_cfg;
const MemMapEntry *memmap;
const int *irqmap;
--
2.4.11
- Re: [Qemu-arm] [Qemu-devel] [PATCH RFC 05/16] hw/core/machine: add smp properites, (continued)
[Qemu-arm] [PATCH RFC 11/16] target-ppc: don't use smp_threads, Andrew Jones, 2016/06/10
[Qemu-arm] [PATCH RFC 10/16] hw/ppc/spapr: don't use smp_cores, smp_threads, Andrew Jones, 2016/06/10
[Qemu-arm] [PATCH RFC 13/16] hw/arm/virt: don't use smp_cpus, max_cpus, Andrew Jones, 2016/06/10
[Qemu-arm] [PATCH RFC 14/16] hw/arm/virt: stash cpu topo info in VirtGuestInfo, Andrew Jones, 2016/06/10
[Qemu-arm] [PATCH RFC 12/16] hw/arm/virt: rename *.smp_cpus to *.cpus,
Andrew Jones <=
[Qemu-arm] [PATCH RFC 15/16] smbios: don't use smp_cores, smp_threads, Andrew Jones, 2016/06/10
[Qemu-arm] [PATCH RFC 16/16] sysemu/cpus: bye, bye smp_cores, smp_threads, Andrew Jones, 2016/06/10
Re: [Qemu-arm] [Qemu-devel] [PATCH RFC 00/16] Rework SMP parameters, Thomas Huth, 2016/06/11
Re: [Qemu-arm] [Qemu-devel] [PATCH RFC 00/16] Rework SMP parameters, Andrew Jones, 2016/06/12