Re: [Qemu-arm] [Qemu-devel] [PATCH v3 1/8] hw/arm/virt: Add a GPIO controller

[Igor Mammedov]

On Mon, 16 Nov 2015 21:23:02 +0800
address@hidden wrote:

> From: Shannon Zhao <address@hidden>
> 
> ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for
> powerdown, hotplug evnets. Add a GPIO controller in machine virt,
s/evnets/events/

> to support powerdown, maybe can be used for cpu hotplug. And
> here we use pl061.
> 
> Signed-off-by: Shannon Zhao <address@hidden>
> Signed-off-by: Shannon Zhao <address@hidden>
> Reviewed-by: Wei Huang <address@hidden>
> Tested-by: Wei Huang <address@hidden>
> ---
>  hw/arm/virt.c         | 30 ++++++++++++++++++++++++++++++
>  include/hw/arm/virt.h |  1 +
>  2 files changed, 31 insertions(+)
> 
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 9c6792c..7977e3c 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -120,6 +120,7 @@ static const MemMapEntry a15memmap[] = {
>      [VIRT_UART] =               { 0x09000000, 0x00001000 },
>      [VIRT_RTC] =                { 0x09010000, 0x00001000 },
>      [VIRT_FW_CFG] =             { 0x09020000, 0x00000018 },
> +    [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
>      [VIRT_MMIO] =               { 0x0a000000, 0x00000200 },
>      /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size 
> */
>      [VIRT_PLATFORM_BUS] =       { 0x0c000000, 0x02000000 },
> @@ -135,6 +136,7 @@ static const int a15irqmap[] = {
>      [VIRT_UART] = 1,
>      [VIRT_RTC] = 2,
>      [VIRT_PCIE] = 3, /* ... to 6 */
> +    [VIRT_GPIO] = 7,
>      [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
>      [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
>      [VIRT_PLATFORM_BUS] = 112, /* ...to 112 + PLATFORM_BUS_NUM_IRQS -1 */
> @@ -538,6 +540,32 @@ static void create_rtc(const VirtBoardInfo *vbi, 
> qemu_irq *pic)
>      g_free(nodename);
>  }
>  
> +static void create_gpio(const VirtBoardInfo *vbi, qemu_irq *pic)
> +{
> +    char *nodename;
> +    hwaddr base = vbi->memmap[VIRT_GPIO].base;
> +    hwaddr size = vbi->memmap[VIRT_GPIO].size;
> +    int irq = vbi->irqmap[VIRT_GPIO];
> +    const char compat[] = "arm,pl061\0arm,primecell";
> +
> +    sysbus_create_simple("pl061", base, pic[irq]);
> +

vvvvv
> +    nodename = g_strdup_printf("/address@hidden" PRIx64, base);
> +    qemu_fdt_add_subnode(vbi->fdt, nodename);
> +    qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
> +                                 2, base, 2, size);
> +    qemu_fdt_setprop(vbi->fdt, nodename, "compatible", compat, 
> sizeof(compat));
> +    qemu_fdt_setprop_cell(vbi->fdt, nodename, "#gpio-cells", 2);
> +    qemu_fdt_setprop(vbi->fdt, nodename, "gpio-controller", NULL, 0);
> +    qemu_fdt_setprop_cells(vbi->fdt, nodename, "interrupts",
> +                           GIC_FDT_IRQ_TYPE_SPI, irq,
> +                           GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> +    qemu_fdt_setprop_cell(vbi->fdt, nodename, "clocks", vbi->clock_phandle);
> +    qemu_fdt_setprop_string(vbi->fdt, nodename, "clock-names", "apb_pclk");
> +
> +    g_free(nodename);
could you split off DT parts into a separate patch pls.

> +}
> +
>  static void create_virtio_devices(const VirtBoardInfo *vbi, qemu_irq *pic)
>  {
>      int i;
> @@ -1041,6 +1069,8 @@ static void machvirt_init(MachineState *machine)
>  
>      create_pcie(vbi, pic, vms->highmem);
>  
> +    create_gpio(vbi, pic);
> +
>      /* Create mmio transports, so the user can create virtio backends
>       * (which will be automatically plugged in to the transports). If
>       * no backend is created the transport will just sit harmlessly idle.
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index f464586..925faa7 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -59,6 +59,7 @@ enum {
>      VIRT_PCIE_ECAM,
>      VIRT_PLATFORM_BUS,
>      VIRT_PCIE_MMIO_HIGH,
> +    VIRT_GPIO,
>  };
>  
>  typedef struct MemMapEntry {