Re: [Protux-devel] commiting stuff

[Luciano Giordana]

oops..

maybe I should check use usage of alsa buses by another processes. but I dont 
know how to do this right now...

I will verify that

But good to know you can run it now :-)

[]s


On Sunday 01 June 2003 04:52 pm, booker wrote:
> Stop .... and old problem comes back to my mind ..... arts.
> I stopped the arts sound system and now I'm able to run protux!!!!
>
> Now it's time to check out the new features! :-)
>
>
> greetings
> Reinhard
>
> Am Sonntag, 1. Juni 2003 21:35 schrieb booker:
> > Am Samstag, 31. Mai 2003 19:15 schrieb Luciano Giordana:
> > > >         [ Added property DEFAULT_SAMPLE_RATE = 48000  ]
> > > >         [ Added property DEFAULT_BIT_DEPTH = 24  ]
> > >
> > > default BIT depth shouldnt be 24, remove your .protuxrc and run again..
> > > might help :-/
> >
> > Sorry, don't helps ..... still similar output:
> >
> >
> >
> >
> >
> > address@hidden protux]$ p1
> > Loading required GL library /usr/X11R6/lib/libGL.so.1.2
> > ENTERING MustuxApplication (CONSTRUCTOR)
> > LEAVING MustuxApplication (CONSTRUCTOR)
> > ENTERING Protux (CONSTRUCTOR)
> >     ENTERING GlobalProperties.cc::init
> >         [ Added property VERSION = 0.17.5  ]
> >         [ Added property HZOOM_LEVEL = 18  ]
> >         [ Added property DEFAULT_NUM_TRACKS = 6  ]
> >         [ Added property MINIMUM_MULTITRACKAREA_WIDTH = 740  ]
> >         [ Added property MINIMUM_MULTITRACKAREA_HEIGHT = 400  ]
> >         [ Added property SPECTROGRAM_WIDTH = 200  ]
> >         [ Added property SPECTROGRAM_HEIGHT = 100  ]
> >         [ Added property JMB_CLEAR_TIME = 2000  ]
> >         [ Added property JMB_HOLD_SENSITIVENESS_FACTOR = 10  ]
> >         [ Added property JMB_DOUBLE_PRESS_INTERVAL = 200  ]
> >         [ Added property SLICE_WIDTH_FACTOR = 1  ]
> >         [ Added property MP3_DECODE_COMMAND = mpg123 -w %if  ]
> >         [ Added property OGG_DECODE_COMMAND = ogg123 -d wav %if  ]
> >         [ Added property MP3_ENCODE_COMMAND = notlame -b320 %if  ]
> >         [ Added property OGG_ENCODE_COMMAND = oggenc -b320 %if  ]
> >         [ Added property DEFAULT_SAMPLE_RATE = 44100  ]
> >         [ Added property DEFAULT_BIT_DEPTH = 16  ]
> >     LEAVING GlobalProperties.cc::init
> >     ENTERING MustuxAudioDeviceMapper.cc::init
> >         [ Found ALSA supported Card : EMU10K1 - Sound Blaster Live! ]
> >         [ PLABACK Bus 0 [ card 0 ] : "EMU10K1 - 1st OUT (hw:0,3)" created
> > ] [ CAPTURE Bus 0 [ card 0 ] : "EMU10K1 - 1st IN (hw:0,2)" created ] [
> > CAPTURE Bus 1 [ card 0 ] : "EMU10K1 - 2nd IN (hw:0,1)" created ] [
> > PLABACK Bus 1 [ card 0 ] : "EMU10K1 - 2nd OUT (hw:0,0)" created ] [
> > CAPTURE Bus 2 [ card 0 ] : "EMU10K1 - 3rd IN (hw:0,0)" created ]
> >
> >         [ Probing CAPTURE Buses
> > ------------------------------------------------ ]
> >         [       Probing valid modes for bus  0:0 ... ]
> >         [          Trying 22050 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 22050 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 32000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 32000 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 2 channels 16 bits ... OK ]
> >         [          Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]
> >         [       Probing valid modes for bus  0:1 ... ]
> >         [          Trying 22050 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 22050 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 32000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 32000 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 44100 Hz 2 channels 24 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 48000 Hz 2 channels 24 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 1 channels 16 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 2 channels 16 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 1 channels 24 bits ... FAILED :  ]
> >         [          Trying 96000 Hz 2 channels 24 bits ... FAILED :  ]
> >         [       Probing valid modes for bus  0:2 ... ]
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Protux-devel mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/protux-devel
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel

-- 
Best Regards
--
Luciano Giordana - Musician - Certified Java/GNU C++ Developer - Free Software 
Evangelist
Project Mustux - http://www.freesoftware.fsf.org/mustux
-- Once Palladium is up and running , I will become a hacker --