[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Partysip-dev] X-Ten Client bypasses partysip

From: Erik lagerway
Subject: RE: [Partysip-dev] X-Ten Client bypasses partysip
Date: Fri, 26 Sep 2003 10:57:01 -0700

Got it.

Erik Lagerway

-----Original Message-----
From: address@hidden
[mailto:address@hidden Behalf Of
Walter Schober
Sent: Thursday, September 25, 2003 9:42 AM
To: 'This is the partysip mailing list'
Subject: AW: [Partysip-dev] X-Ten Client bypasses partysip


Well, found it. There are more places of record-route :-) One is in the
filter module, the other below. Just had the one in the filter-module
set to on.

Now changed the others to on as well and X-Ten replies correctly to
partysip! Who wants to report this to X-Ten :-)

Thanks for your help!

P.S.: But here as well I get the 481 after a CANCEL of that call then,
although I get a RINGING here -> other thread.

On Mon, 15 Sep 2003, Walter Schober wrote:

> Hi!
> 1) PartySIP is configured with record-route on, but I miss the 
> Record-Route Field in the outgoing message. Shouldn't be there a
> Record-Route: <sip:;lr>
> behind the other?

This might comes from a bad configuration file? I don't have enough info
to tell you. send the whole partysip log and partysip.conf to
address@hidden (mailing list won't support attachement)

But the answer should be routed thanks to the Via header. Record-route
are not used for responses. So a bug surely exist in the UA that receive
the call.

Partysip-dev mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]