[Paparazzi-devel] IVY bus link ground station to airborne drone

[JD123UAV]

Hi,

Another question relating to the paparazzi communications, when using the
IVY bus is the communication link between the ground computer and airborne
provided by a piece of hardware such as a remote control control device or
an API device such as the XBee?  Or is the network Wi-Fi router able to
provide this function?

Also, in regards to the IVY bus - I downloaded and installed Ivy from 
http://www.eei.cena.fr/products/ivy/ -  was this necessary? 

At the moment I have the ARDrone2, ground computer and Vicon motion capture
system connected on the same Wi-Fi network through a Wi-Fi router but no ivy
bus communications is being received by the drone.

I am using the GPS small message format in the same manner at NatNet to
transfer the XYZ position data from the Vicon to the drone.

Also is the PPRZ_link method similar, i.e. requiring additional hardware /
software?
<http://lists.paparazziuav.org/file/n18358/paparazzi_comms_network_link.png> 

thanks,

John



--
View this message in context: 
http://lists.paparazziuav.org/IVY-bus-link-ground-station-to-airborne-drone-tp18358.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.