Re: [Paparazzi-devel] Failed to calibrate the Accelerometers

[Felix Ruess]

As a sidenote: there is no reason to compile or run paparazzi as root.... you should do that as normal user...

On Sun, Feb 26, 2017 at 9:23 PM, Felix Ruess <address@hidden> wrote:

Did you turn the board on all six sides?

You can also run the calibration with the -p flag and it will plot the results where you might more easily see if the input data is meaningful (e.g. if you turned it and which samples were thrown out).

On Sun, Feb 26, 2017 at 3:14 PM, banditniu <address@hidden> wrote:

I was calibrating the  Accelerometers of aspirin v2.2 following the toturial
on the wiki. it was not success. can any one help me with it?
<http://lists.paparazziuav.org/file/n18264/34%E5%B1%8F%E5%B9%95%E6%88%AA%E5%9B%BE.png>



--
View this message in context: http://lists.paparazziuav.org/Failed-to-calibrate-the-Accelerometers-tp18264.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel