Re: [Paparazzi-devel] Apogee RC not Working Properly

[Gautier Hattenberger]

Hi,

The wiring seems correct. I don't think you need to remove the PPM_IN. 
But you can remove the bind plug of AUX4 after binding.

Gautier

Le 04/03/2016 02:57, Pengzhi Tian a écrit :
> Hi Gautier,
>
> Thanks for your reply. The receiver I am using is Spektrum 9645 and the
> paparazzi version is v5.6.0_stable.
>
> I just tried the binding. Please take a look at the figure and let me know
> if I am doing it correct.
>
> <http://lists.paparazziuav.org/file/n17757/IMG_1737.jpg>
>
> Somehow I feel the binding is not consistent. Sometimes the receiver is in
> binding mode when I ground the AUX4 + connect both PPM_IN and RX2 to the
> receiver. Sometimes the receiver is in binding mode even when I don't ground
> the AUX4.
>
> After binding, should I just remove the ground wire for AUX4 or remove
> ground wire for AUX4 + disconnect PPM_IN.
>
> Best,
> Pengzhi Tian
>
>
>
> --
> View this message in context: 
> http://lists.paparazziuav.org/Apogee-RC-not-Working-Properly-tp17742p17757.html
> Sent from the paparazzi-devel mailing list archive at Nabble.com.
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel