Re: [Paparazzi-devel] Plane drops after take off on energyadaptative loop

[Joseph Muhlhausen]

Hi Gautier,

The airspeed setpoint was 17 m/s and my energy gains are:

    <define name="ENERGY_TOT_PGAIN" value="0.18"/>

    <define name="ENERGY_TOT_IGAIN" value="0.3"/>

    <define name="ENERGY_DIFF_PGAIN" value="0.18"/>

    <define name="ENERGY_DIFF_IGAIN" value="0.25"/>

I move from the standard control loop to the energyadaptative loop because of trouble with altitude control on the standard loop. If nobody is using energy or total energy, I may as well move to a loop used by many so I can get some advice. What airspeed control loop are you using on fixed wing?

Thanks!

Joseph

On Mon, Feb 22, 2016 at 3:59 PM, Gautier Hattenberger <address@hidden> wrote:

Hi,

I have never really used it a actually. You probably have the gain energy_diff_pgain a bit to high. When the airspeed drops, it pitch down to gain airspeed. What was your actual airspeed setpoint?

Gautier

Le 22/02/2016 19:07, Joseph Muhlhausen a écrit :

Thanks Felix,

I have looked more closely at the logs and I think the plane drops because the airspeed drops when transitioning to the STANDBY block (see screenshot).

Gautier or Christophe any suggestion on how to avoid this behavior?

Thanks,

Joseph

On Sat, Feb 20, 2016 at 1:12 PM, Felix Ruess <address@hidden> wrote:

Hi Joseph,

to be honest I don't know much about the energy control loop and I haven't been flying fixedwings in a long time...

So maybe Gautier or Christophe can help out here?

Cheers, Felix

On Fri, Feb 19, 2016 at 6:58 PM, Joseph Muhlhausen <address@hidden> wrote:

Hi everyone,

I am having some issues with my take off since I switch to the energyadaptative control loop.

I take off in automatic using the following:

<block group="home" key="R" name="AUTOTAKEOFF" strip_button="AutoTakeoff">

      <exception cond="GetPosAlt() > ground_alt+15" deroute="climb"/>

      <set value="0" var="kill_throttle"/>

      <set value="0" var="autopilot_flight_time"/>

      <attitude pitch="45" roll="0" throttle="1" vmode="throttle"/>

    </block>

    <block group="home" key="R" name="climb">

      <exception cond="GetPosAlt() > ground_alt+50" deroute="Standby"/>

      <attitude pitch="35" roll="0" throttle="0.70" vmode="throttle"/>

    </block>

    <block group="home" key="Ctrl+a" name="Standby" strip_button="Standby" strip_icon="home.png">

      <circle radius="nav_radius" wp="STDBY"/>

    </block>

When the AP switch to standby, the plane drops from the sky and catches up quickly and the rest of the flight is normal. I'm using umarim lite 2.0 on a fixed delta wing with v5.4.2_stable-3-gc8d866b-dirty and I attached my last flight log.

Best,

Joseph

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel