paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] GPS Fix problems in first autonomous flight with a


From: Felix Ruess
Subject: Re: [Paparazzi-devel] GPS Fix problems in first autonomous flight with ar drone 2.0
Date: Tue, 25 Aug 2015 23:56:13 +0200

Hi Sreenath,

unfortunately I can't test this since I don't have an ARDrone2...
But we are tracking this in https://github.com/paparazzi/paparazzi/issues/1295

Cheers, Felix

On Sun, Aug 23, 2015 at 6:23 PM, Sreenath Dama <address@hidden> wrote:
First of all, i'm sorry for the couple of typing errors in my previous mail. 

Adding a few more points to the previous mail. 
1)Today our first autonomous flight with ar drone 2.0 is successful with the 'u-blox' GPS at baud rate of 9600 :)

2)We do not understand why there is no fix with 'Sirf type parrot GPS dongle' even after the changes that are mentioned in the previous mail.

Thanks,
sreenath 

On Fri, Aug 7, 2015 at 10:59 AM, Sreenath Dama <address@hidden> wrote:
Hi, 

We am trying to fly first autonomous flight on ar drone 2.0 with parrot gps dongle. we are unable to fly it, as gps is not fixing. We have taken into account of sirf gps module by following the below steps.
  1) We have made changes in "ardrone2.xml" for parrot gps module. (i,e "ublox" -> "sirf" and commenting "gps_ubx_ucenter module").
  2) Gps baud rate to set to 57600 in "ardrone2.makefile". 

I have come acroos this lik ,which says that gps driver haven't installed. Is it the reason in my case for GPS for not locking in gcs. But when ar drone is connected through AR FreeFlight app, it is showing number of satellites and gps accuracy also. It seems that gps driver is installed.

Attached the Flight plan xml file. We are unable to start the "Start Engine" block in the flight plan and proceed further.

Thanks ,
sreenath   





 



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]