[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Blank GCS with Lisa/S
From: |
beryl.wicaksono |
Subject: |
Re: [Paparazzi-devel] Blank GCS with Lisa/S |
Date: |
Wed, 4 Mar 2015 21:01:22 -0700 (MST) |
Hi Sam,
I'm sorry that my screenshot is not enough resolution. So, here I paste from
the terminal message.
[164727.824147] cdc_acm 2-2.1:1.0: ttyACM0: USB ACM device
[164740.119585] usb 2-2.1: USB disconnect, device number 16
[164766.154822] usb 2-2.1: new full-speed USB device number 17 using
uhci_hcd
[164766.433058] usb 2-2.1: New USB device found, idVendor=0484,
idProduct=5741
[164766.433063] usb 2-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[164766.433065] usb 2-2.1: Product: Superbit USBRF
[164766.433066] usb 2-2.1: Manufacturer: 1 BIT SQUARED
[164766.433068] usb 2-2.1: SerialNumber: URF0089
[164766.436105] cdc_acm 2-2.1:1.0: This device cannot do calls on its own.
It is not a modem.
[164766.436121] cdc_acm 2-2.1:1.0: ttyACM0: USB ACM device
Oh I see, so to read telemetry through BMP, the superbit usbrf will not used
? I will try to debug via the BMP.
I hope that you can find the problem and the solution , so I can use the
supebit usbrf and make mys stuff fly.
I'm looking forward for your reply. Thank you.
Regards,
Beryl Wicaksono
Garrosh wrote
> Hello Beryl,
>
> I have looked at your screenshot, but the resolution isn't very good, so I
> can't read the output of "$ dmesg | tail". You may copy paste it instead.
>
> If you want to read telemetry through the BMP, you have to use it's UART
> capabilities, so you need to connect it to the UART of your Lisa/S. The
> BMP is
> listed as two devices, one is for flashing (SWD) and the other is for
> telemetry
> (UART).
>
> Sam
>
> _______________________________________________
> Paparazzi-devel mailing list
> Paparazzi-devel@
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
-----
Beryl Wicaksono
Electrical Engineering
Bandung Institute of Technology
--
View this message in context:
http://lists.paparazziuav.org/Blank-GCS-with-Lisa-S-tp16839p16860.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.
- [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/01
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, christopher . d . gough, 2015/03/02
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/02
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, Samuel Comeau, 2015/03/02
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/02
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, Samuel Comeau, 2015/03/02
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/03
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, Samuel Comeau, 2015/03/03
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/03
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, Samuel Comeau, 2015/03/04
- Re: [Paparazzi-devel] Blank GCS with Lisa/S,
beryl.wicaksono <=
- Re: [Paparazzi-devel] Blank GCS with Lisa/S, beryl.wicaksono, 2015/03/10