Re: [Paparazzi-devel] Question about "FBW".

[Karoly Molnar]

Felix, can you recommend a hardware that supports dual MCU configuration? Is it meant for one MCU with multiple cores or two physically separate micros? I have just quickly scanned thru the Paparazzi supported hardware page but could not find any.

Thanks
Karoly

---

Date: Wed, 4 Feb 2015 12:38:33 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Question about "FBW".

Hi,

See http://docs.paparazziuav.org/latest/main__ap_8c.html#details and http://docs.paparazziuav.org/latest/main__fbw_8c.html#details

If you have a single MCU system, then both "processes" will run in main on the same MCU.

In a dual MCU setup, main will contain the ap or fbw part for the respective MCU and communicate via inter_mcu.

Hope that helps,

Felix

On Mon, Feb 2, 2015 at 1:00 PM, wertrrte <address@hidden> wrote:

Hi,

I'm studying code  of 5.4, and I wonder the difference between main_ap.c and
main_fbw.c. In main.c, two macros "AP" and "FBW" are used to handle ap and
fbw functions. My question is, can the two macros both be active in main.c
at any time?Thanks for any help.

wertrrte





--
View this message in context: http://lists.paparazziuav.org/Question-about-FBW-tp16751.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel