paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa/MX 2.1 Bind Button issues


From: Piotr Esden-Tempski
Subject: Re: [Paparazzi-devel] Lisa/MX 2.1 Bind Button issues
Date: Wed, 27 Aug 2014 23:23:27 -0700

Hi,

This should fix the issues with Lisa/M and Lisa/MX prior to version 2.1: 
https://github.com/paparazzi/paparazzi/pull/814

I also added the board files for Lisa/M and Lisa/MX version 2.1: 
https://github.com/paparazzi/paparazzi/pull/813

In both cases I am not getting glitchy and unpredictable binding/not binding 
behavior any more.

Please test.

Regards,
Piotr

On Aug 27, 2014, at 22:35, enes dilcan <address@hidden> wrote:

> Hello,
> 
> As an additional information, I sometimes face this issue in Lisa M2.0 
> especially when ublox gps (MKGPS) try to 3D fix. 
> 
> I`ve one lisa m board. So, I`m not sure that the root cause of the issue 
> 
> May it be a board specific/configuration error?
> 
> 
> Any ideas?
> 
> Regards,
> Enes
> 
> 
> On Wed, Aug 27, 2014 at 11:07 PM, John Voegeli <address@hidden> wrote:
> I cannot shine any additional light, but I will say I have had the same issue 
> with my 2.1 as well using r100 orange Rx. Hopefully knowing there is at least 
> 2 will help. Haha.
> 
> -JV
> 
> Sent from my iPhone
> 
> > On Aug 27, 2014, at 16:02, "cxiao" <address@hidden> wrote:
> >
> > Hi all,
> >
> > We are using the new Lisa/MX v2.1 boards from 1BitSquared and are having
> > issues while trying to bind. On this board, there is a Bind button that
> > replaces the previous method of shorting GND to ADC1 on the ANALOG1 port.
> >
> > We have followed the instructions on the wiki for  binding the Lisa/M
> > <http://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Binding>   using the bind
> > button. We are able to bind just fine with this method; however, the Lisa
> > does not stay bound when it is power cycled. We have to rebind every time
> > the Lisa is turned off and on.
> >
> > We think that this is because the Lisa is always in its bind mode
> > (regardless of whether the button is pressed or not) - we actually tried
> > binding without pressing the bind button at all, and that works.
> >
> > We're using 2 OrangeRX R110x satellite receivers. (we've tried with spektrum
> > satellite receivers as well, though).
> >
> > Can anyone shed some light on this issue?
> >
> >
> >
> > --
> > View this message in context: 
> > http://lists.paparazziuav.org/Lisa-MX-2-1-Bind-Button-issues-tp16043.html
> > Sent from the paparazzi-devel mailing list archive at Nabble.com.
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> 
> -- 
> 
> nsdcn
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel




reply via email to

[Prev in Thread] Current Thread [Next in Thread]