Re: [Paparazzi-devel] Lisa/MX 2.1 Bind Button issues

[Piotr Esden-Tempski]

Hi,

Also as there are no dedicated board files for Lisa/MX 2.1 part of paparazzi 
yet. I assume you are still using the ADC1 pin method to induce binding, and 
the button is currently not influencing anything. I am working on board files 
that will take the button into account.

Regarding the Spektrum satellites binding on power up. I am getting the same 
behavior as you do on my Lisa/MX V2.1. I am working on finding out why 
satellites think they should be in bind mode.

Temporarily you can try to do the following:

- Unplug the Spektrum satellites
- Power up the Lisa/MX
- Plug in the satellites

This way the satellites should not go into bind mode on startup and you should 
be good to go. It is not ideal, so I am working on a solution to this problem. 
I will keep you posted on my progress.

Regards,
Piotr

On Aug 27, 2014, at 13:49, Felix Ruess <address@hidden> wrote:

> Hi,
> 
> we have an open issue regarding spektrum binding on F4 boards: 
> https://github.com/paparazzi/paparazzi/issues/780
> But what you describe seems like a separate issue (entering bind mode on 
> every startup), feel free to open an issue for this.
> Sounds a bit like as if the internal pullup is not yet active (or too slow) 
> when the bind button is read at startup...
> Although I wasn't able to reproduce this issue with my Lisa/MX v2.0 (without 
> bind button, still using the ADC1 pin).
> 
> Cheers, Felix
> 
> 
> On Wed, Aug 27, 2014 at 10:02 PM, cxiao <address@hidden> wrote:
> Hi all,
> 
> We are using the new Lisa/MX v2.1 boards from 1BitSquared and are having
> issues while trying to bind. On this board, there is a Bind button that
> replaces the previous method of shorting GND to ADC1 on the ANALOG1 port.
> 
> We have followed the instructions on the wiki for  binding the Lisa/M
> <http://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Binding>   using the bind
> button. We are able to bind just fine with this method; however, the Lisa
> does not stay bound when it is power cycled. We have to rebind every time
> the Lisa is turned off and on.
> 
> We think that this is because the Lisa is always in its bind mode
> (regardless of whether the button is pressed or not) - we actually tried
> binding without pressing the bind button at all, and that works.
> 
> We're using 2 OrangeRX R110x satellite receivers. (we've tried with spektrum
> satellite receivers as well, though).
> 
> Can anyone shed some light on this issue?
> 
> 
> 
> --
> View this message in context: 
> http://lists.paparazziuav.org/Lisa-MX-2-1-Bind-Button-issues-tp16043.html
> Sent from the paparazzi-devel mailing list archive at Nabble.com.
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel