Re: [Paparazzi-devel] Powering Lisa/M 2.0

[Chris]

No problem at all if you don't parallel the output of 2 or more BECs.
Sometimes linear BECs (switchmode never) can be paralleled but this is not a good practice in any case.
In other words if you use more than one BEC in a split load configuration but make sure that their + rail is not paralleled.
Chris

On 05/03/2014 01:59 PM, Dylan Brunello wrote:

Hello,

I have a Lisa/M 2.0 configured with the default power jumpers. I'd like to power everything in the system from a single battery (3S LiPo). The plan is to power the servo rail using the 5V BEC on the ESC. Is it safe to connect an additional 5V BEC to the battery and use that to power the Lisa and peripherals? My concern is the two BECs on the one battery. Any thoughts regarding powering the system in this fashion?

Cheers,

Dylan

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel