paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] no GPS no navigation route


From: Ben Laurie
Subject: Re: [Paparazzi-devel] no GPS no navigation route
Date: Wed, 19 Mar 2014 10:00:27 +0000




On 19 March 2014 05:56, Kadir ÇİMENCİ <address@hidden> wrote:
maybe it is related with the baud rate of your gps(I had a similar problem , ppz ucenter module can't talk with gps when it is configured to 19200 ). Configure the baud rate as 9600 on ublox , then connect gps your ppz. and don't forget to add 'gps_ubx_ucenter' module to your project..

The other problem is you could have the wrong port configured.
 

Kadir


2014-03-19 4:44 GMT+02:00 Eduardo lavratti <address@hidden>:

open the message windows and lock @ GPS to see if you ppz are receiving any gps message.
way you continue with KILL status ? kill switch with are active ?

Date: Wed, 19 Mar 2014 02:09:22 +0200
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] no GPS no navigation route


Hi,
i have lisa/m i connected everything in the same manner as in the wiki but the following errors

1-  GPS not fix although it's wirking correctly with u-center.


Inline image 1




2-  no navigation routine set:


Inline image 4


3-   error in the main paparazzi s/w


Inline image 5




any comments appreciated in advance

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]