Hello Stephen and Chris,
Thank you very much for your help. I went through the
information you sent me and the integration of the 9Xtend
radios seems pretty straight forward. Although, I have a
couple of more questions before I go ahead and get them:
1) So, you basically recommend me to get 2 9Xtend OEM
for both, ground and air? The one in the ground station
can be connected through the FTDI board to the computer
and the one in the air directly on the Xbee ports as
explained in the wiki.
2) Can I use the Digi 9Xtend Modems to also send video
3) Can I connect the 9Xtend modem in the ground station
directly to the FTDI 3.3V power supply and get it to work? I
know that this will decrease my transmitted power (and also
range) but I don't want to make a BEC only to supply 5V to
the ground modem for the initial testings.
4) Can I use a 9Xtend USB on the ground and and 9Xtend
OEM on the air? If so, how should I connect the the 9Xtend
USB to my computer and how should I configure it? Will I
have any advantages/disadvantages using this configuration?