[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] YNT: Rotate reference frame - Lisa/M 2.0 Aspirin 2.2 -
[Paparazzi-devel] YNT: Rotate reference frame - Lisa/M 2.0 Aspirin 2.2 - mounting the IMU correctly
Mon, 9 Sep 2013 20:18:02 +0000
You can edit these parameters:
<section name="IMU" prefix="IMU_">
<define name="BODY_TO_IMU_PHI" value="-0.93" unit="deg"/>
<define name="BODY_TO_IMU_THETA" value="10.71" unit="deg"/>
<define name="BODY_TO_IMU_PSI" value="0." unit="deg"/>
Then, check the PFD screen.
Kimden: Markus Bina address@hidden adına address@hidden address@hidden
Gönderildi: 09 Eylül 2013 Pazartesi 23:11
Konu: [Paparazzi-devel] Rotate reference frame - Lisa/M 2.0 Aspirin 2.2 -
mounting the IMU correctly
A few days ago I finished assembling all the hardware for my first
Since I'm still a RC/Paparazzi beginner I figured to start by using the
"Bixler"-airframe, which I can fly reasonably well without any
autopilot, for my first setup.
Basically, I would like to mount the autopilot (Lisa/M) with the long
side parallel to the fuselage, i.e. not like this
Thus I'd not have to make any permanent changes to my airframe (the
autopilot sits on a piece of acrylic (PMMA) in the CM fixed by velcro;
and there wouldn't be any wires hanging out of the fuselage.
This would - imho - also ease the wiring.
How do I rotate the IMU/Autopilot reference frame in the airframe
configuration (XML) consistently for/in all subsystems
To mount the Lisa/M board with its long side parallel to the fuselage I
figured, one needs to swap X and Y axis and invert the Y axis.
*) Airframe: Bixler - http://paparazzi.enac.fr/wiki/Bixler
*) Board: Lisa/M v2.0 with Aspirin v2.2 from Transition Robotics
*) GPS: ublox
*) Telemetry: xbee
*) Radio: Spektrum (9645)
Sorry, in case my question is somewhat basic.
Paparazzi-devel mailing list