3 weeks ago I asked for a 2 system GPS, and Heinrich recommended the GPS below. It supports both Glonass and GPS systems. I ordered the module (64USD) and an active antenna (85USD) with a total price of 159USD including shipment.
I will try them whenever they arrive. I hope that we will have a very stable GPS in all wheather conditions.
I will send the results when we test it.
>you can use multi norm receivers for GPS and GOLNASS etc.
>Three is a module for 45 Euro available. You have to add the antenna
>and to wrote a new driver for paparazzi.
>My smart phone has also the same chip set. Usually i receive 17-19
>Refik Sever schrieb:
> Dear all,
> Yesterday, our GPS was lost for 2 seconds and our plane went to
> failsafe. We were lucky and it did not crash.
> I want to add a second GPS for reliability. Is there anyone
> implemented it already?
From: address@hidden [mailto:address@hidden On Behalf Of Jake Tarren
Sent: Tuesday, September 3, 2013 7:50 PM
Subject: Re: [Paparazzi-devel] New GPS recommendation
After doing more reserch into uBLOX, it seems like the module best suited for my needs is the MAX-7. Does anyone know what the support is like for them?
On Tue, Sep 3, 2013 at 11:35 AM, Jake Tarren <address@hidden> wrote:
Is there any support for the uBlox LEA-7N module? It looks to be superior to the 6H
On Tue, Sep 3, 2013 at 11:30 AM, Jake Tarren <address@hidden> wrote:
That one looks good, but do you know why it's so cheap compared to the others?
That's the one we were looking at, but it's since been discontinued.
As always, thanks for the help guys,
On Tue, Sep 3, 2013 at 9:08 AM, mahui625primax <address@hidden> wrote:
Have the eagle file for the new GPS with hmc5883l?
TMF.ACT AQ50 PRO
在 2013-9-3，20:36，Chris Gough <address@hidden> 写道：
> Chris Gough
> On 03/09/2013, at 10:22 PM, address@hidden wrote:
>> I have one of the new gps's from 3dr. Works extremely well and includes magno to get it further away from influences. Using that on the ardu though so need to check if it works for paparazzi.
> The new 3DR gps is a LEA-6H and so will be fine, no problem. The connectors are hirose type (not picoblades like an original paparazzi gps) so you will have to splice together a cable, that's all.
> The HMC5883L mag on the 3DR gps is a separate i2c connector, so it's no different really to having one on a separate breakout board.
> Chris Gough
>> I had the gs407 before but that pin was a dealbreaker. There was abreakout rhat would just fall off. It was years ago so should check if the issue persists.
>> On 03/09/2013, at 09:15, Tobias <address@hidden> wrote:
>>> I just changed mine to this one - really like the helical antenna and the performance is rock solid ;-)
>>> unfortunately you can not store the configuration permanently anymore with the new version - but with a small battery its fine -
>>> cheers Tobi
>>> Paparazzi-devel mailing list
>> Paparazzi-devel mailing list
> Paparazzi-devel mailing list
Paparazzi-devel mailing list