|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] drotek 10dof v2 imu |
Date: | Thu, 20 Jun 2013 21:00:14 +0200 |
Hm.. that is strange.The mpu60x0_i2c peripheral works fine in the driver for the apogee autopilot.What do you have set as gyro/accel sensitivity?The drotek driver defaults to 1000 deg/s and 4g as mentioned before... the defaults should be correct in the latest of imu_drotek branch.We still need a better way to set the defaults according to the configured range. Also not sure what the best default range is...Cheers, FelixOn Thu, Jun 20, 2013 at 7:48 PM, Eduardo lavratti <address@hidden> wrote:
OPs... sorry, my board with mpu60x0 use address 0xD0
for now i have:
very high values for AX,AY,AZ
very high values for Gp,gq and 0 for gr
mag are working and values appear to be right.
Date: Thu, 20 Jun 2013 09:23:30 +0300
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] drotek 10dof v2 imuChrisgr = 0gq = 10gp = -1572818And from the gyro (raw again)az = 720872ay = 3018600ax = -65636From the Accelerometer (raw values)The artificial horizon does not move at all and the raw accelerator ang gyro values look strange, here are some sample values:Hi FelixI did some tests today and it looks like the new mpu60x0 subsystem does not work as intended.
The magnetometer values are always 0.I also get some warnings during compile time about mismatched pointer types.
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |