Re: [Paparazzi-devel] Vibration probelm can be solved by useing, the acceleration sensor R9500M from MEMSIC

[Eduardo lavratti]

i am not convinced that only changing accelerometer the vibration issues have solved.
In my rotorcraft the vibration issues are solved when i configured the gyro low-pass filter.
Changing acc lowpass filter have no much difference in attitude estimation.

BTW, mikrokopter use the best analog gyros i have tested.
This make a diference. i am using MLX gyros in my old mikrokopter.
two year ago i used cheap isz500 gyros to test a mikrokopter board and the result is too poor compared to MLX giros.

---

Date: Thu, 30 May 2013 09:53:33 +0200
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Vibration probelm can be solved by useing, the acceleration sensor R9500M from MEMSIC

Only 5,38€ , four times cheaper.....
http://www.digikey.at/product-detail/de/MXR9500MZ/1267-1016-1-ND/3719468

Am 30.05.2013 09:49 schrieb "Sergey Krukowski" <address@hidden>:

Hi guys!

Mk is not the only place to by the parts. Look here:

 

http://de.farnell.com/memsic/mxr9500mz/accelerometer-3-achsen-1-5g-smd/dp/1365612

 

Best Regards,

Sergey Krukowski

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel