Re: [Paparazzi-devel] imu sensor filtering?

[Chris]

I started with IR sensors, i know how to use them very well and it will 
be my last resort.
I think it will fly alright as it is now that vibrations are 1 m/s pp.
You are right about vibrations traveling through the air and i am afraid 
that the remaining portion
of vibration propagates through the air so i will need an acoustic 
isolation also.
No worries I think  MoonGel will do the job.
I haven't tried to use an engine mount with vibration absorbers because 
the engine is a tight fit,
there is no room for the vibration dampers unless i decide to dive in 
and start modifying the nose of the aircraft.

On 05/22/2013 07:57 AM, address@hidden wrote:
> Hi Chris,
> do you think that you can fly with the old IR sensors?
> If you don't fly in clouds, fog, rain or small valleys it works well and
> has no problems with vibrations.
> Perhaps this is also a solution to test damping in real flights.
> Have you used a hydro mount system for the combustion engine?
> Same vibrations can also be transported by the air.
> Good luck with yours experiments.