[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Bat value error and V4.9

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Bat value error and V4.9
Date: Thu, 6 Dec 2012 10:09:14 +0100

Hi Eric,

please run ./paparazzi_version in the Paparazzi directory and provide the exact version it outputs.
E.g. I tested with v4.9_devel-311-g9ec9a92

On which version did it work?

And I guess you accidentally provided the wrong airframe file, that one is for a tiny0.99 with IR sensors...

Cheers, Felix

On Thu, Dec 6, 2012 at 9:43 AM, <address@hidden> wrote:
 felix,thank for your many many... help

I use the V4.9 from the week begining...

I hope to fly tomorow..

the join file was good (for the bat problem) few weeks ago ..



Felix Ruess <address@hidden> a écrit :

Hi Eric,

can you please provide some more details?
Which exact paparazzi_version are you using? Can you post your airframe

I just checked with my Lisa/L 1.0 and the bat voltage follows my input
voltage just fine..

Cheers, Felix

On Wed, Dec 5, 2012 at 7:24 PM, <address@hidden> wrote:


Now I can compile on lisaL and booz....

On LisaL, I havea problem with the BAT on the  ground station.

The ADC0 (pin14) really move (oscilloscope), the CPU has been changed...

On the PC the value of BAT (lab psu) it change on boot, but still stable
untill I reboot LisaL..

After the boot, I can do anythink with my PSU, the ground station still on
the boot value...



Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]